Rear Main Crankshaft Seal for Hyundai Tucson 21443-2B020

BRAND NEW *OEM Quality* rear main crankshaft seal for Hyundai Tucson vehicles.

A worn rear main crankshaft seal lets engine oil weep past the back of the crankshaft, often showing up as a slow leak near the bell housing or a slipping clutch on manual Tucson models. Dispatched from Melbourne today.

TO SUIT

This seal fits Hyundai Tucson NX4A,NX4E, TL,TLE (G4FT/G4FJ engines) models from 2015 to 2026. See the full model and engine breakdown below for exact coverage.

FITMENT CHECK

Confirm your Tucson is fitted with the OEM number 21443-2B020 before ordering, as Tucson spans several chassis codes and engine families across this production run.

OEM PART NUMBERS

• 21443-2B020
• 21443-2B000
• 21443-2B010

OTHER PART NUMBERS

• Elring: 318.360
• Victor Reinz: 81-54069-10
• Permaseal: OSS0458

PACKAGE INCLUDES

1 x Rear Main Crankshaft Seal, 76mm ID x 108mm OD x 8mm.

ABOUT THIS SEAL

The rear main seal sits on the crankshaft flange at the transmission end of the Tucson engine, keeping oil inside the crankcase while the crankshaft spins freely.

On Tucson models this seal hardens with age and mileage, and once it fails oil weeps onto the clutch or torque converter, gradually dropping oil level and risking clutch slip on manual variants.

COMMON SYMPTOMS OF FAILURE

• Oil misting visible on the flexplate or flywheel on inspection
• A burning clutch smell under load
• Dropping oil level with no leak visible at the sump or rocker cover
• Oil spots under the vehicle near the bell housing
• Slowly dropping oil level with no other visible leak