Rear Main Crankshaft Seal for Hyundai Excel 21443-22000

BRAND NEW *OEM Quality* rear main crankshaft seal for Hyundai Excel vehicles.

A worn rear main crankshaft seal lets engine oil weep past the back of the crankshaft, often showing up as a slow leak near the bell housing or a slipping clutch on manual Excel models. Packed and shipped from Victoria today.

TO SUIT

This seal fits Hyundai Excel X-1, X-2, X-3 (G4DJ/G4EK/G4FK engines) models from 1985 to 2000. See the full model and engine breakdown below for exact coverage.

FITMENT CHECK

Confirm your Excel is fitted with the OEM number 21443-22000 before ordering, as Excel spans several chassis codes and engine families across this production run.

OEM PART NUMBERS

• 21443-22000
• 21443-22010
• MD008885
• MD016549
• MD117643
• MD372250

OTHER PART NUMBERS

• Elring: 034.530
• Victor Reinz: 81-53306-00

PACKAGE INCLUDES

1 x Rear Main Crankshaft Seal, 72mm ID x 96mm OD x 9mm.

ABOUT THIS SEAL

The rear main seal sits on the crankshaft flange at the transmission end of the Excel engine, keeping oil inside the crankcase while the crankshaft spins freely.

On Excel models this seal hardens with age and mileage, and once it fails oil weeps onto the clutch or torque converter, gradually dropping oil level and risking clutch slip on manual variants.

COMMON SYMPTOMS OF FAILURE

• Clutch slipping or reduced bite in manual vehicles
• Burning oil smell from the transmission area
• Oil residue found on the flywheel during a clutch or transmission job
• Oil misting visible on the flexplate or flywheel on inspection
• A burning clutch smell under load