Crankshaft Position Sensor for Kia Cerato LD & Sportage KM (2.0L G4GC Engines) Crankshaft Position Sensor for Kia Cerato LD & Sportage KM (2.0L G4GC Engines)Crankshaft Position Sensor for Kia Cerato LD & Sportage KM (2.0L G4GC Engines)Crankshaft Position Sensor for Kia Cerato LD & Sportage KM (2.0L G4GC Engines)Crankshaft Position Sensor for Kia Cerato LD & Sportage KM (2.0L G4GC Engines)Crankshaft Position Sensor for Kia Cerato LD & Sportage KM (2.0L G4GC Engines)Crankshaft Position Sensor for Kia Cerato LD & Sportage KM (2.0L G4GC Engines)Crankshaft Position Sensor for Kia Cerato LD & Sportage KM (2.0L G4GC Engines)Crankshaft Position Sensor for Kia Cerato LD & Sportage KM (2.0L G4GC Engines)Crankshaft Position Sensor for Kia Cerato LD & Sportage KM (2.0L G4GC Engines)

Crankshaft Position Sensor for Kia Cerato LD & Sportage KM (2.0L G4GC Engines)

Part #: CSCA31 OEM #: 3918023910 SKU: CSCA31_3918023910-1

Direct Fit Replaces 39180-23910

$80.65
RRP $104.97
SAVE $24.32 (23%)
In Stock

BRAND NEW *OEM Quality* crankshaft position sensor for Kia Cerato LD and Sportage KM/JE fitted with the 2.0L G4GC engine.

This is a direct connector match with no wiring modification needed. Same-day dispatch before 12pm from Victoria.

TO SUIT

Fits the Kia Cerato LD hatchback and sedan (2004-2009) and Kia Sportage KM/JE SUV, both 2WD and AWD variants (2007-2010), with the 2.0L G4GC engine producing 104-105kW.

FITMENT CHECK

This is the black housing, "new style" Hall-effect sensor with gaskets/seals included - OEM 39180-23910. It is not the white "old style" sensor (OEM 39180-23500), which is a different physical part and listed separately.

OEM PART NUMBERS

  • 39180-23910 / 3918023910

OTHER PART NUMBERS

  • HELLA: 6PU 358 191-061
  • VEMO: V52-72-0092

PACKAGE INCLUDES

1 x Crankshaft Position Sensor (3-pin, black housing, new style, with gaskets/seals).

ABOUT THIS SENSOR

The crankshaft sensor tells the ECU exactly where the crankshaft is and how fast it is turning, which the engine needs to time ignition and injection correctly.

On the Cerato and Sportage, a failing sensor is a frequent cause of an intermittent no-start that seems to fix itself once the engine cools down.

COMMON SYMPTOMS OF FAILURE

  • Intermittent no-start, often worse when the engine is hot
  • Engine stalls without warning while driving
  • Check engine light with fault code P0335 or P0336
  • Rough idle or occasional misfire
  • Uneven acceleration under load
  • [2004 - 2009] KIA CERATO LD Hatchback (2.0L 4cyl G4GC 105kW)
  • [2004 - 2009] KIA CERATO LD Sedan (2.0L 4cyl G4GC 105kW)
  •  
  • [2007 - 2010] KIA SPORTAGE KM SUV 4WD (2.0L 4cyl G4GC 104kW)
  • [2007 - 2010] KIA SPORTAGE KM SUV i (2.0L 4cyl G4GC 104kW)
How do I test a crankshaft or camshaft position sensor?

Use an OBD2 scanner to check for fault codes P0335 to P0338 (crankshaft) or P0340 to P0349 (camshaft). You can also test the sensor with a multimeter - inductive sensors should show resistance between 200 and 1,000 ohms, while Hall effect sensors require a live voltage test with the engine cranking. Erratic or absent RPM signal on a live data scanner is a strong indicator of sensor failure.

Can a cam or crank sensor fault cause my vehicle to go into limp mode?

Yes. A faulty crankshaft position sensor in particular can cause the ECU to lose engine speed and position data entirely, which may trigger limp mode or prevent the engine from starting. A faulty camshaft sensor on variable valve timing engines can cause the VVT system to default to a fixed position, significantly reducing power and fuel economy.

Do cam and crank sensors need to be programmed after replacement?

In most cases no - aftermarket OEM replacement sensors are direct plug-in replacements that require no programming. However some vehicles, particularly late model European makes including BMW and Mercedes-Benz, may require a crankshaft adaptation reset using a dealer-level scan tool after replacement. Check your vehicle service information before replacing the sensor.

What are the symptoms of a faulty crankshaft position sensor?

Symptoms include intermittent stalling, engine not starting, rough idle, misfires, and a Check Engine light with codes P0335-P0338. In severe cases the engine will crank but not start as the ECU cannot determine crank position for ignition timing.

What are the symptoms of a faulty camshaft position sensor?

Symptoms include poor performance, misfires, difficulty starting, rough idle, and fault codes P0340-P0343. Variable valve timing systems (VVT) will also be affected, causing sluggish response and increased fuel consumption.

Can I drive with a bad crankshaft position sensor?

If the sensor has failed completely the engine will not start or will stall and not restart. If it is intermittently failing, driving is dangerous - the engine can cut out without warning. Replace it immediately.

Do I need to replace both the cam and crank sensor at the same time?

Not necessarily - replace whichever has failed based on fault codes and diagnosis. However, if your vehicle has high kilometres and one has failed, it is worth considering replacing both as they are similar in age and condition.

Identification
SKUCSCA31_3918023910-1
BrandAftermarket OEM Replacement
Part Numbers
Part NumberCSCA31
Reference OEM Number3918023910
Other OEM Numbers39180-23910, 3918023910
Related Part NumbersCSCA31, EH0224
Trade Part NumbersHELLA: 6PU 358 191-061, VEMO: V52-72-0092
Product Specifics
Product TypeSENSOR
Sensor TypeCRANKSHAFT POSITION SENSOR
Number of pins3-Pin
Supplementary Article InfoWith Gaskets/Seals, Without Cable
Fitting Depth24mm
Housing ColourBlack
Mounting TypeBolted
Number of mounting bores1
Compatible MakesKia
Fitment TypeDirect Replacement
Other Details
NoteBlack NEW STYLE Hall sensor, gaskets incl - not white 23500 type
Unit Of Measureea

Be The First To Review This Product!

Help other SENSORGAL LTD. users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category