Name: Camshaft Position Sensor for Iveco Daily 35C 40C 50C 65C 70C 2.3 3.0 Diesel 1999-2025
Brand: Aftermarket OEM Replacement
SKU: CSCA329-4
Price: 79.45 AUD
Availability: InStock

BRAND NEW *OEM Quality* camshaft position sensor to suit Iveco Daily 2.3 and 3.0 diesel engines.

Daily owners usually meet this fault as an intermittent cut-out under load with a fully laden van, then a refusal to restart until the engine cools. This sensor is a workshop-grade direct replacement, dispatched from Cranbourne VIC.

TO SUIT

Fits the Iveco Daily van, bus and platform chassis across the 29L 33S 35C 35S 40C 42S 45C 50C 55C 60C 65C and 70C weight ratings, from the early 8140.43S 2.8 through the F1AE and F1CE 2.3 and 3.0 common rail to the current F1CFL and F1CGL engines.

FITMENT CHECK

The Daily runs both a cam and a crank sensor of similar appearance. Confirm you are replacing the unit in the cylinder head and that the plug is a 3-pin oval before ordering.

OEM PART NUMBERS

504048261
80891268
80891260
281002667

OTHER PART NUMBERS

BOSCH: 0281002904
VALEO: 253804
FAE: 79350
ASHIKA: 152-0K-K06
DT Spare Parts: 7.51415

PACKAGE INCLUDES

1 x camshaft position sensor with 3-pin oval connector and seal ring. Supplied without cable.

ABOUT THIS SENSOR

The camshaft position sensor gives the Iveco ECU cylinder phase so injection can be sequenced correctly on the common rail system. In a commercial vehicle that runs long hours at high underbonnet temperature, this sensor sees more heat cycling than most.

Heat is what kills them. As the internal circuit degrades the signal becomes intermittent under vibration and load, which is why a Daily will often cut out fully laden on a hill and then start again twenty minutes later.

COMMON SYMPTOMS OF FAILURE

Engine cutting out under load then restarting when cool
P0340 P0341 or P0016 stored in the ECU
EDC warning light on the dash
Hard starting first thing in the morning
Loss of power and limp mode when loaded
Erratic idle with the vehicle stationary

[2016 - 2025] IVECO DAILY Bus 40C18, 50C18, 60C18 (3.0L 4cyl 132kW F1CFL411W,F1CFL4117 Diesel RWD)
[2006 - 2011] IVECO DAILY Bus 50C18 (3.0L 4cyl 130kW F1CE0481H Diesel RWD)
[1999 - 2006] IVECO DAILY Platform/Chassis 40C13 (2.8L 4cyl 92kW 8140.43S Diesel RWD)
[1999 - 2006] IVECO DAILY Platform/Chassis 45 C 14 (3.0L 4cyl 100kW F1CE0481A Diesel RWD)
[2004 - 2006] IVECO DAILY Platform/Chassis 40C14 (3.0L 4cyl 100kW F1CE0481A Diesel RWD)
[2004 - 2006] IVECO DAILY Platform/Chassis 50C17 (3.0L 4cyl 122kW F1CE0481B Diesel RWD)
[2004 - 2006] IVECO DAILY Platform/Chassis 65C17 (3.0L 4cyl 122kW F1CE0481B Diesel RWD)
[2006 - 2011] IVECO DAILY Platform/Chassis 45C15 (3.0L 4cyl 107kW F1CE0481F Diesel RWD)
[2006 - 2011] IVECO DAILY Platform/Chassis 45C18, 45C18 /P, 45C18 D, 45C18 D/P (3.0L 4cyl 130kW F1CE0481H Diesel RWD)
[2006 - 2011] IVECO DAILY Platform/Chassis 50C18 (3.0L 4cyl 130kW F1CE0481H Diesel RWD)
[2006 - 2011] IVECO DAILY Platform/Chassis 65C18 (3.0L 4cyl 130kW F1CE0481H Diesel RWD)
[2007 - 2011] IVECO DAILY Platform/Chassis 45C17, 45C17 /P (3.0L 4cyl 125kW F1CE3481C Diesel RWD)
[2007 - 2008] IVECO DAILY Platform/Chassis 70C17, 70C17 /P (3.0L 4cyl 125kW F1CE3481C Diesel RWD)
[2009 - 2011] IVECO DAILY Platform/Chassis 70C17, 70C17P (3.0L 4cyl 125kW F1CE3481C Diesel RWD)
[2009 - 2011] IVECO DAILY Platform/Chassis 70C18 (3.0L 4cyl 130kW F1CE0481H Diesel RWD)
[2011 - 2014] IVECO DAILY Platform/Chassis 35C17, 35S17, 40C17, 45C17, 50C17, 60C17, 65C17, 70C17 (3.0L 4cyl 125kW F1CE3481C,F1CE3481K Diesel RWD)
[2011 - 2014] IVECO DAILY Platform/Chassis 35C21, 35S21, 40C21, 45C21, 50C21, 60C21, 65C21, 70C21 (3.0L 4cyl 150kW F1CE3481D Diesel RWD)
[2014 - 2025] IVECO DAILY Platform/Chassis 35S17, 35C17, 40C17, 45S17, 45C17, 50C17, 60C17, 65C17 (3.0L 4cyl 125kW F1CFL411H,F1CFL411F Diesel RWD)
[2014 - 2025] IVECO DAILY Platform/Chassis 35S17, 55S17 4x4 (3.0L 4cyl 125kW F1CFL411F Diesel AWD)
[2014 - 2025] IVECO DAILY Platform/Chassis 35S21, 35C21, 40C21, 45C21, 50C21, 60C21, 65C21, 70C21 (3.0L 4cyl 150kW F1CFL411G,F1CGL411C Diesel RWD)
[2016 - 2025] IVECO DAILY Platform/Chassis 35S18, 35C18, 40C18, 45C18, 50C18, 60C18, 65C18, 70C18 (3.0L 4cyl 132kW F1CFL411W,F1CGL411B,F1CFL4117 Diesel RWD)
[2016 - 2025] IVECO DAILY Platform/Chassis 35S18, 55S18, 55C18, 70S18, 70C18 4x4 (3.0L 4cyl 132kW F1CFL411W,F1CFL4117 Diesel AWD)
[2021 - 2025] IVECO DAILY Platform/Chassis 35C21, 35S21, 40C21, 42S21, 50C21, 60C21, 65C21, 70C21 (3.0L 4cyl 152kW F1CFL411A Diesel RWD)
[1999 - 2006] IVECO DAILY Van 35 S 13 V, 35 C 13 V (2.8L 4cyl 92kW 8140.43S Diesel RWD)
[2004 - 2006] IVECO DAILY Van 40C14 (3.0L 4cyl 100kW F1CE0481A Diesel RWD)
[2004 - 2006] IVECO DAILY Van 50C17 (3.0L 4cyl 122kW F1CE0481B Diesel RWD)
[2004 - 2006] IVECO DAILY Van 65C17 (3.0L 4cyl 122kW F1CE0481B Diesel RWD)
[2006 - 2011] IVECO DAILY Van 29L10 V (2.3L 4cyl 70kW F1AE0481F Diesel RWD)
[2006 - 2011] IVECO DAILY Van 35S14 C, 35S14 C/P, 35S14 V, 35S14 V/P, 35C14 V (2.3L 4cyl 100kW F1AE0481H Diesel RWD)
[2006 - 2011] IVECO DAILY Van 50C18 V, 50C18 V/P (3.0L 4cyl 130kW F1CE0481H Diesel RWD)
[2006 - 2011] IVECO DAILY Van 65C18 (3.0L 4cyl 130kW F1CE0481H Diesel RWD)
[2007 - 2011] IVECO DAILY Van 35C14 GV, 35C14 GV/P, 35S14 GV, 35S14 GV/P (3.0L 4cyl 100kW F1CE0441A Petrol RWD)
[2007 - 2011] IVECO DAILY Van 45C17 V, 45C17 V/P (3.0L 4cyl 125kW F1CE3481C Diesel RWD)
[2011 - 2014] IVECO DAILY Van 29L15 V, 35S15 V, 35C15L V, 40C15L V, 50C15L V (2.3L 4cyl 107kW F1AE3481C Diesel RWD)
[2011 - 2014] IVECO DAILY Van 29S13, 29L13, 35C13, 35S13, 40C13, 40S13 (2.3L 4cyl 93kW F1AE3481B Diesel RWD)
[2011 - 2014] IVECO DAILY Van 35C15 V, 40C15 V, 45C15 V, 50C15 V, 60C15 V, 65C15 V (3.0L 4cyl 107kW F1CE3481B,F1CE3481J Diesel RWD)
[2011 - 2014] IVECO DAILY Van 35C17, 35S17, 40C17, 45C17, 50C17, 60C17, 65C17, 70C17 (3.0L 4cyl 125kW F1CE3481C,F1CE3481K Diesel RWD)
[2011 - 2014] IVECO DAILY Van 35C21 V, 35S21 V, 40C21 V, 45C21 V, 50C21 V (3.0L 4cyl 150kW F1CE3481D Diesel RWD)
[2014 - 2025] IVECO DAILY Van 35S17, 35C17, 40C17, 50C17, 55C17, 60C17, 65C17, 70C17 (3.0L 4cyl 125kW F1CFL411H,F1CFL411F Diesel RWD)
[2014 - 2025] IVECO DAILY Van 35S21, 35C21, 40C21, 50C21 (3.0L 4cyl 150kW F1CFL411G,F1CGL411C Diesel RWD)
[2016 - 2025] IVECO DAILY Van 33S14, 35S14, 35C14, 42S14 (2.3L 4cyl 100kW F1AGL411D,F1AGL411Y,F1AGL411B,F1AGL411R,F1AGL411J Diesel RWD)
[2016 - 2025] IVECO DAILY Van 35S18, 35C18, 40C18, 50C18, 60C18, 65C18, 70C18 (3.0L 4cyl 132kW F1CFL411W,F1CGL411B,F1CFL4117 Diesel RWD)
[2019 - 2025] IVECO DAILY Van 35S21, 35C21, 40C21, 50C21, 60C21, 65C21, 70C21 (3.0L 4cyl 155kW F1CFL4115 Diesel RWD)

How do I test a crankshaft or camshaft position sensor?

Use an OBD2 scanner to check for fault codes P0335 to P0338 (crankshaft) or P0340 to P0349 (camshaft). You can also test the sensor with a multimeter - inductive sensors should show resistance between 200 and 1,000 ohms, while Hall effect sensors require a live voltage test with the engine cranking. Erratic or absent RPM signal on a live data scanner is a strong indicator of sensor failure.

Can a cam or crank sensor fault cause my vehicle to go into limp mode?

Yes. A faulty crankshaft position sensor in particular can cause the ECU to lose engine speed and position data entirely, which may trigger limp mode or prevent the engine from starting. A faulty camshaft sensor on variable valve timing engines can cause the VVT system to default to a fixed position, significantly reducing power and fuel economy.

Do cam and crank sensors need to be programmed after replacement?

In most cases no - aftermarket OEM replacement sensors are direct plug-in replacements that require no programming. However some vehicles, particularly late model European makes including BMW and Mercedes-Benz, may require a crankshaft adaptation reset using a dealer-level scan tool after replacement. Check your vehicle service information before replacing the sensor.

What are the symptoms of a faulty crankshaft position sensor?

Symptoms include intermittent stalling, engine not starting, rough idle, misfires, and a Check Engine light with codes P0335-P0338. In severe cases the engine will crank but not start as the ECU cannot determine crank position for ignition timing.

What are the symptoms of a faulty camshaft position sensor?

Symptoms include poor performance, misfires, difficulty starting, rough idle, and fault codes P0340-P0343. Variable valve timing systems (VVT) will also be affected, causing sluggish response and increased fuel consumption.

Can I drive with a bad crankshaft position sensor?

If the sensor has failed completely the engine will not start or will stall and not restart. If it is intermittently failing, driving is dangerous - the engine can cut out without warning. Replace it immediately.

Do I need to replace both the cam and crank sensor at the same time?

Not necessarily - replace whichever has failed based on fault codes and diagnosis. However, if your vehicle has high kilometres and one has failed, it is worth considering replacing both as they are similar in age and condition.

Identification
SKU	CSCA329-4
Barcode #	3165144045229
Brand	Aftermarket OEM Replacement
Part Numbers
Part Number	CSCA329
Reference OEM Number	504048261
Other OEM Numbers	504048261, 80891268, 80891260, 281002667
Related Part Numbers	0281002904, 39300-27400, 3930027400, CSCA329
Trade Part Numbers	BOSCH: 0281002904, VALEO: 253804, FAE: 79350, ASHIKA: 152-0K-K06
Product Specifics
Product Type	SENSOR
Sensor Type	CAMSHAFT POSITION SENSOR
Fitting Position	Fits On Cylinder Head
Number of pins	3-Pin
Connector Shape	oval
Number of connectors	1
Housing Colour	Black
Fitment Type	Direct Replacement
Other Details
Note	Suits 24.2mm depth 3-pin oval sensor - not the 24.5mm type
Unit Of Measure	ea