Name: 2 Pack Cam Angle Sensors for BMW Intake and Exhaust N46 N52 N54 N55 N20 E90 F30 X3 Z4 2004-2018
Brand: Aftermarket OEM Replacement
SKU: CSCA391-2PACK
Price: 233.68 AUD
Availability: InStock

BRAND NEW *OEM Quality* pair of camshaft position sensors to suit BMW N46 N52 N54 N55 and N20 engines.

Got both intake and exhaust cam codes on your 325i or 335i? Replacing the pair together saves a second job later - packed and shipped from Cranbourne VIC.

TO SUIT

Made for four and six cylinder BMW petrol engines that use two cam sensors - the N46 in the 118i 120i and 320i, the N52 in the 125i 130i 323i 325i 330i and 525i, the N54 and N55 in the 135i 335i and 740i, and the N20 in the 320i 328i 520i and X3 X4 xDrive20i.

FITMENT CHECK

Contains two sensors - one for the intake camshaft and one for the exhaust. The 116i N45 only uses one sensor of this type, so buy the single listing for that car.

OEM PART NUMBERS

13627525014
13627546660
13627558518
13627594040
13627591193
7525014
7546660
7558518
7594040

OTHER PART NUMBERS

0986280777
V20-72-0540-1
6PU009121-011
S119445001Z
235-1285

PACKAGE INCLUDES

2 x BRAND NEW camshaft position sensors with 3-pin oval connectors.

ABOUT THIS SENSOR

Each VANOS camshaft has its own sensor so the DME can control intake and exhaust timing separately. Sensors of the same age and mileage tend to fail close together, which is why many workshops replace both at once.

Faults show as cam position or VANOS codes, uneven idle, flat spots and higher fuel use, often with the engine light on.

COMMON SYMPTOMS OF FAILURE

Intake and exhaust cam codes P0340 P0365 together
VANOS timing faults P0014 or P0015
Uneven idle and flat spots
Reduced power with engine light on

[01/04 - 12/06] BMW 118i E87 (2.0L 4cyl N46 B20 B U1 95kW)
[01/04 - 12/07] BMW 118i E87 (2.0L 4cyl N46 B20 B U1 95kW)
[01/04 - 12/07] BMW 120i E87 (2.0L 4cyl N46 B20 B 110kW)
[01/05 - 12/09] BMW 130i E87 (3.0L 6cyl N52 B30 AF 195kW)
[01/06 - 12/07] BMW 118i E87 (2.0L 4cyl N46 B20 B U1 95kW)
[01/06 - 12/09] BMW 130i E87 (3.0L 6cyl N52 B30 AF 195kW)
[01/07 - 12/11] BMW 118i E87 (2.0L 4cyl N46 B20 B U2 100kW) - built from 03/07
[01/08 - 12/13] BMW 120i E88 (2.0L 4cyl N46 B20 B 115kW)
[01/08 - 12/13] BMW 125i E82 (3.0L 6cyl N52 B30 AE 160kW)
[01/08 - 12/13] BMW 125i E88 (3.0L 6cyl N52 B30 AE 160kW)
[01/08 - 12/10] BMW 135i E82 (3.0L 6cyl N54 B30 A 225kW)
[01/08 - 12/11] BMW 135i E82 (3.0L 6cyl N54 B30 A 225kW)
[01/11 - 12/13] BMW 120i E82 (2.0L 4cyl N46 B20 B 115kW)
[01/12 - 12/16] BMW 125i F20 (2.0L 4cyl N20 B20 A 160kW)
[01/05 - 12/07] BMW 320i E90 (2.0L 4cyl N46 B20 B 110kW)
[01/05 - 12/11] BMW 325i E90 (2.5L 6cyl N52 B25 AF 160kW)
[01/05 - 12/06] BMW 330i E90 (3.0L 6cyl N52 B30 AF 190kW)
[01/06 - 12/11] BMW 323i E90 (2.5L 6cyl N52 B25 A 140kW)
[01/06 - 12/12] BMW 323i E91 (2.5L 6cyl N52 B25 A 140kW)
[01/06 - 12/13] BMW 325i E92 (2.5L 6cyl N52 B25 AF 160kW)
[01/06 - 12/10] BMW 335i E90 (3.0L 6cyl N54 B30 A 225kW)
[01/06 - 12/08] BMW 335i E92 (3.0L 6cyl N54 B30 A 225kW)
[01/06 - 12/10] BMW 335i E92 (3.0L 6cyl N54 B30 A 225kW)
[01/07 - 12/11] BMW 320i E90 (2.0L 4cyl N46 B20 B 115kW)
[01/07 - 12/12] BMW 320i E91 (2.0L 4cyl N46 B20 B 115kW)
[01/07 - 12/13] BMW 325i E93 (2.5L 6cyl N52 B25 AF 160kW)
[01/08 - 12/10] BMW 335i E92 (3.0L 6cyl N54 B30 A 225kW)
[01/11 - 12/15] BMW 320i F30 (2.0L 4cyl N20 B20 A 135kW)
[01/11 - 12/15] BMW 328i F30 (2.0L 4cyl N20 B20 A 180kW)
[01/12 - 12/15] BMW 320i F31 (2.0L 4cyl N20 B20 A 135kW)
[01/12 - 12/15] BMW ACTIVEHYBRID 3 F30 (3.0L 6cyl N55 B30 A 225kW)
[01/13 - 12/16] BMW 320i F34 (2.0L 4cyl N20 B20 B 135kW)
[01/05 - 12/10] BMW 525i E60 (2.5L 6cyl N52 B25 AF 160kW)
[01/11 - 12/16] BMW 520i F10 (2.0L 4cyl N20 B20 B 135kW)
[01/12 - 12/16] BMW ACTIVEHYBRID 5 F10 (3.0L 6cyl N55 B30 A 225kW)
[01/09 - 12/12] BMW 740Li F02 (3.0L 6cyl N54 B30 A 240kW)
[01/09 - 12/12] BMW 740i F01 (3.0L 6cyl N54 B30 A 240kW)
[01/12 - 12/15] BMW 740Li F02 (3.0L 6cyl N55 B30 A 235kW)
[01/12 - 12/15] BMW 740i F01 (3.0L 6cyl N55 B30 A 235kW)
[01/12 - 12/14] BMW X1 E84 XDRIVE 28i (2.0L 4cyl N20 B20 A 180kW)
[01/12 - 12/15] BMW X1 E84 XDRIVE 28i (2.0L 4cyl N20 B20 A 180kW)
[01/06 - 12/10] BMW X3 E83 XDRIVE 25i/2.5si (2.5L 6cyl N52 B25 AF 160kW)
[01/06 - 12/08] BMW X3 E83 XDRIVE 25i/2.5si (2.5L 6cyl N52 B25 AF 160kW)
[01/06 - 12/10] BMW X3 E83 XDRIVE 30i/3.0si (3.0L 6cyl N52 B30 A 200kW)
[01/11 - 12/17] BMW X3 F25 XDRIVE 20i (2.0L 4cyl N20 B20 A 135kW)
[01/14 - 12/18] BMW X4 F26 XDRIVE 20i (2.0L 4cyl N20 B20 A 135kW)
[01/14 - 12/18] BMW X4 F26 XDRIVE 35i (3.0L 6cyl N55 B30 A 225kW)
[01/07 - 12/10] BMW X5 E70 XDRIVE 30i/3.0si (3.0L 6cyl N52 B30 A 200kW)
[01/10 - 12/13] BMW X5 E70 XDRIVE 35i (3.0L 6cyl N55 B30 A 225kW)
[01/08 - 12/10] BMW X6 E71 XDRIVE 35i (3.0L 6cyl N54 B30 A 225kW)
[01/10 - 12/14] BMW X6 E71 XDRIVE 35i (3.0L 6cyl N55 B30 A 225kW)
[01/06 - 12/09] BMW Z4 E85 (2.5L 6cyl N52 B25 AF 160kW)
[01/06 - 12/09] BMW Z4 E86 (3.0L 6cyl N52 B30 AF 195kW)
[01/09 - 12/11] BMW Z4 E89 SDRIVE 23i (2.5L 6cyl N52 B25 A/ N52 B25 B 150kW)
[01/09 - 12/11] BMW Z4 E89 SDRIVE 30i (3.0L 6cyl N52 B30 AF 190kW)
[01/11 - 12/16] BMW Z4 E89 SDRIVE 20i (2.0L 4cyl N20 B20 A 135kW)
[01/11 - 12/16] BMW Z4 E89 SDRIVE 28i (2.0L 4cyl N20 B20 A 180kW)

How do I test a crankshaft or camshaft position sensor?

Use an OBD2 scanner to check for fault codes P0335 to P0338 (crankshaft) or P0340 to P0349 (camshaft). You can also test the sensor with a multimeter - inductive sensors should show resistance between 200 and 1,000 ohms, while Hall effect sensors require a live voltage test with the engine cranking. Erratic or absent RPM signal on a live data scanner is a strong indicator of sensor failure.

Can a cam or crank sensor fault cause my vehicle to go into limp mode?

Yes. A faulty crankshaft position sensor in particular can cause the ECU to lose engine speed and position data entirely, which may trigger limp mode or prevent the engine from starting. A faulty camshaft sensor on variable valve timing engines can cause the VVT system to default to a fixed position, significantly reducing power and fuel economy.

Do cam and crank sensors need to be programmed after replacement?

In most cases no - aftermarket OEM replacement sensors are direct plug-in replacements that require no programming. However some vehicles, particularly late model European makes including BMW and Mercedes-Benz, may require a crankshaft adaptation reset using a dealer-level scan tool after replacement. Check your vehicle service information before replacing the sensor.

What are the symptoms of a faulty crankshaft position sensor?

Symptoms include intermittent stalling, engine not starting, rough idle, misfires, and a Check Engine light with codes P0335-P0338. In severe cases the engine will crank but not start as the ECU cannot determine crank position for ignition timing.

What are the symptoms of a faulty camshaft position sensor?

Symptoms include poor performance, misfires, difficulty starting, rough idle, and fault codes P0340-P0343. Variable valve timing systems (VVT) will also be affected, causing sluggish response and increased fuel consumption.

Can I drive with a bad crankshaft position sensor?

If the sensor has failed completely the engine will not start or will stall and not restart. If it is intermittently failing, driving is dangerous - the engine can cut out without warning. Replace it immediately.

Do I need to replace both the cam and crank sensor at the same time?

Not necessarily - replace whichever has failed based on fault codes and diagnosis. However, if your vehicle has high kilometres and one has failed, it is worth considering replacing both as they are similar in age and condition.

Identification
Brand	Aftermarket OEM Replacement
Part Numbers
Part Number	SCSCA391-2PACK
Reference OEM Number	13627525014
Other OEM Numbers	13627525014, 13627546660, 13627558518, 13627594040, 13627591193
Related Part Numbers	CAM-080, CAS1350, SC334, SS11123, CSCA391
Interchange Part Numbers	0986280777, V20-72-0540-1, 6PU009121-011, S119445001Z, 235-1285
Product Specifics
Product Type	SENSOR
Sensor Type	CAMSHAFT POSITION SENSOR
Manufacturer Warranty	1 Year
Fitting Position	Intake Side, Exhaust Side
Number of pins	3-Pin
Connector Shape	oval
Fitting Depth	28mm
Number of mounting bores	1
Compatible Makes	BMW
Fitment Type	Direct Replacement
Kit Quantity	2
Other Details
Note	Pair for one 4 or 6 cylinder engine - intake and exhaust
Unit Of Measure	ea