Cam Angle Sensor for Mitsubishi Triton ML MN MK 2.4L 4G64 Pajero NM NP 6G74 Cam Angle Sensor for Mitsubishi Triton ML MN MK 2.4L 4G64 Pajero NM NP 6G74Cam Angle Sensor for Mitsubishi Triton ML MN MK 2.4L 4G64 Pajero NM NP 6G74Cam Angle Sensor for Mitsubishi Triton ML MN MK 2.4L 4G64 Pajero NM NP 6G74Cam Angle Sensor for Mitsubishi Triton ML MN MK 2.4L 4G64 Pajero NM NP 6G74Cam Angle Sensor for Mitsubishi Triton ML MN MK 2.4L 4G64 Pajero NM NP 6G74Cam Angle Sensor for Mitsubishi Triton ML MN MK 2.4L 4G64 Pajero NM NP 6G74Cam Angle Sensor for Mitsubishi Triton ML MN MK 2.4L 4G64 Pajero NM NP 6G74Cam Angle Sensor for Mitsubishi Triton ML MN MK 2.4L 4G64 Pajero NM NP 6G74Cam Angle Sensor for Mitsubishi Triton ML MN MK 2.4L 4G64 Pajero NM NP 6G74Cam Angle Sensor for Mitsubishi Triton ML MN MK 2.4L 4G64 Pajero NM NP 6G74

Cam Angle Sensor for Mitsubishi Triton ML MN MK 2.4L 4G64 Pajero NM NP 6G74

Part #: CSCA87 OEM #: MD327107 SKU: CSCA87-Triton

Heavy Duty Fit Replaces MD327107

$68.97
In Stock

BRAND NEW *OEM Quality* cam angle sensor to suit Mitsubishi Triton and Pajero.

When this sensor fails on a Triton it usually happens with a load on or a long way from a workshop and the ute simply will not restart. Fitting a fresh sensor is a ten minute job that gets you moving. Dispatched same day from Cranbourne VIC.

TO SUIT

Fits the Mitsubishi Triton MK from 1996 to 2006 and the ML and MN from 2005 to 2015 with the 2.4 litre 4G64 in 94kW and 97kW forms including the LPG variant. Also fits the Pajero NM and NP 3.5 litre 6G74 from 2000 to 2007 and the earlier NH NJ NK and NL. Verified fitment for the 4G64 engine.

FITMENT CHECK

This sensor has an oval 3 pin plug with a 27 mm fitting depth. If your original sensor has a rectangular plug it is a different part.

OEM PART NUMBERS

  • MD327107
  • J005T23071
  • 30874179

OTHER PART NUMBERS

  • BOSCH: 0 986 280 764
  • VEMO: V64-72-0036
  • NTK-AU: EC0103
  • VALEO: 366735
  • WALKER PRODUCTS: 235-1122
  • DELPHI: SS11147

PACKAGE INCLUDES

1 x cam angle sensor with oval 3 pin connector. Supplied without cable.

ABOUT THIS SENSOR

The cam angle sensor reports camshaft position to the engine control unit so injection and spark stay timed to the valves. On the 4G64 and 6G74 it is a Hall effect unit driven off the camshaft.

Utes and four wheel drives put this sensor through heavy vibration heat and dust which is what kills them. On the Triton the classic pattern is a no start after a hot shutdown that clears once the engine cools.

COMMON SYMPTOMS OF FAILURE

  • No start after a hot shutdown that clears once cool
  • Check engine light with fault codes P0340 or P0341
  • Sudden stall while driving under load
  • Extended cranking before the engine fires
  • Loss of power or limp mode when towing
  • Increased fuel consumption
  • [2005 - 2015] MITSUBISHI TRITON ML MN 2.4L 4cyl 4G64 94kW
  • [2007 - 2015] MITSUBISHI TRITON ML MN 2.4L 4cyl 4G64 94kW LPG
  • [2007 - 2015] MITSUBISHI TRITON ML MN 2.4L 4cyl 4G64 97kW
  •  
  • [1996 - 2006] MITSUBISHI TRITON MK 2.4L 4cyl 4G64 97kW
  •  
  • [2000 - 2007] MITSUBISHI PAJERO NM NP 3.5L 6cyl 6G74 149kW
  •  
  • [1995 - 1997] MITSUBISHI PAJERO NH NJ NK NL 3.5L 6cyl 6G74 153kW
  • [1997 - 2000] MITSUBISHI PAJERO NH NJ NK NL 3.5L 6cyl 6G74 143kW
How do I test a crankshaft or camshaft position sensor?

Use an OBD2 scanner to check for fault codes P0335 to P0338 (crankshaft) or P0340 to P0349 (camshaft). You can also test the sensor with a multimeter - inductive sensors should show resistance between 200 and 1,000 ohms, while Hall effect sensors require a live voltage test with the engine cranking. Erratic or absent RPM signal on a live data scanner is a strong indicator of sensor failure.

Can a cam or crank sensor fault cause my vehicle to go into limp mode?

Yes. A faulty crankshaft position sensor in particular can cause the ECU to lose engine speed and position data entirely, which may trigger limp mode or prevent the engine from starting. A faulty camshaft sensor on variable valve timing engines can cause the VVT system to default to a fixed position, significantly reducing power and fuel economy.

Do cam and crank sensors need to be programmed after replacement?

In most cases no - aftermarket OEM replacement sensors are direct plug-in replacements that require no programming. However some vehicles, particularly late model European makes including BMW and Mercedes-Benz, may require a crankshaft adaptation reset using a dealer-level scan tool after replacement. Check your vehicle service information before replacing the sensor.

What are the symptoms of a faulty crankshaft position sensor?

Symptoms include intermittent stalling, engine not starting, rough idle, misfires, and a Check Engine light with codes P0335-P0338. In severe cases the engine will crank but not start as the ECU cannot determine crank position for ignition timing.

What are the symptoms of a faulty camshaft position sensor?

Symptoms include poor performance, misfires, difficulty starting, rough idle, and fault codes P0340-P0343. Variable valve timing systems (VVT) will also be affected, causing sluggish response and increased fuel consumption.

Can I drive with a bad crankshaft position sensor?

If the sensor has failed completely the engine will not start or will stall and not restart. If it is intermittently failing, driving is dangerous - the engine can cut out without warning. Replace it immediately.

Do I need to replace both the cam and crank sensor at the same time?

Not necessarily - replace whichever has failed based on fault codes and diagnosis. However, if your vehicle has high kilometres and one has failed, it is worth considering replacing both as they are similar in age and condition.

Identification
SKUCSCA87-Triton
BrandAftermarket OEM Replacement
Part Numbers
Part NumberCSCA87
Reference OEM NumberMD327107
Other OEM NumbersMD327107, J005T23071, 30874179
Related Part NumbersSC265, CAM-015
Product Specifics
Product TypeSENSOR
Sensor TypeCAMSHAFT POSITION SENSOR
Number of pins3-Pin
Connector Shapeoval
Supplementary Article Infowithout cable
Fitting Depth27 mm
Voltage12 V
Housing ColourBlack
Number of mounting bores1
Compatible MakesMitsubishi
Fitment TypeDirect Replacement
Other Details
NoteOval 3-pin plug 27mm depth. Rectangular plug will not fit.

Be The First To Review This Product!

Help other SENSORGAL LTD. users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category