Cam Angle Sensor for Holden HSV 5.0L LB9 304 5.7L LS1 Commodore VR VY 10456148 Cam Angle Sensor for Holden HSV 5.0L LB9 304 5.7L LS1 Commodore VR VY 10456148Cam Angle Sensor for Holden HSV 5.0L LB9 304 5.7L LS1 Commodore VR VY 10456148Cam Angle Sensor for Holden HSV 5.0L LB9 304 5.7L LS1 Commodore VR VY 10456148Cam Angle Sensor for Holden HSV 5.0L LB9 304 5.7L LS1 Commodore VR VY 10456148Cam Angle Sensor for Holden HSV 5.0L LB9 304 5.7L LS1 Commodore VR VY 10456148Cam Angle Sensor for Holden HSV 5.0L LB9 304 5.7L LS1 Commodore VR VY 10456148Cam Angle Sensor for Holden HSV 5.0L LB9 304 5.7L LS1 Commodore VR VY 10456148Cam Angle Sensor for Holden HSV 5.0L LB9 304 5.7L LS1 Commodore VR VY 10456148

Cam Angle Sensor for Holden HSV 5.0L LB9 304 5.7L LS1 Commodore VR VY 10456148

Part #: CSCA81 OEM #: 10456148 SKU: CSCA81

Direct Fit Replaces 10456148

$69.99
RRP $89.97
SAVE $19.98 (22%)
In Stock

BRAND NEW *OEM Quality* Cam Angle Sensor to suit Holden and HSV 5.0L V8 304 and 5.7L V8 LS1 Gen3 engines.

Check engine light, stalling, or a no-start after a hot soak on your V8 Commodore or HSV? The cam angle sensor is a common culprit on both the LB9 304 and the Gen3 LS1. This is a direct-fit 3-pin oval connector replacement, dispatched same-day before 12pm from Melbourne.

TO SUIT

This sensor suits the Holden Commodore VR and Calais VR with the 5.0L V8 GMH 304, and the Commodore VY and One Tonner VY with the 5.7L V8 LS1 Gen3. It also covers the HSV Grange WH Series 1 and 2 LS1, plus the HSV Senator VR and Statesman VR 185i 5.0L V8.

FITMENT CHECK

This listing is the V8 application. The 3.8L V6 Ecotec and Supercharged engines carry the same OEM number but are listed separately under CSCA81-2 - confirm your engine before ordering.

OEM PART NUMBERS

  • 10456148
  • 8-10456-148-0
  • 8104561480

OTHER PART NUMBERS

  • VEMO: V51-72-0184
  • NTK-AU: EC0054
  • DELPHI: SS10213-11B1
  • MOBILETRON: CS-U106
  • BREMI: 60422

PACKAGE INCLUDES

1 x Cam Angle Sensor - 3-pin oval connector, no additional wiring required.

ABOUT THIS SENSOR

The cam angle sensor reports camshaft position to the ECU so it can synchronise sequential fuel injection and ignition timing. The 304 and the Gen3 LS1 use the same sensor and connector despite being unrelated engine families, which is why one part number covers both.

On the Gen3 LS1 the sensor sits at the rear of the block and is heat-cycled hard, so failure typically shows up as a hot no-start that clears once the engine cools. Fault codes P0340 and P0341 are the usual indicators.

COMMON SYMPTOMS OF FAILURE

  • Check engine light with DTC P0340 or P0341
  • Engine cranks but will not start when hot
  • Rough idle or misfires under load
  • Stalling without warning at idle
  • Intermittent loss of power during acceleration
  • RPM signal dropping out on a scan tool while cranking
  • [2003 - 2004] HOLDEN ADVENTRA VY Wagon 5.7 i V8 CX8/LX8 AWD (5.7L V8 LS1 235kW)
  • [1993 - 1995] HOLDEN BERLINA VR Sedan 5.0 i V8 (5.0L V8 GMH 304 165kW)
  • [1993 - 1995] HOLDEN BERLINA VR Wagon 5.0 i V8 (5.0L V8 GMH 304 165kW)
  • [2002 - 2004] HOLDEN BERLINA VY Sedan 5.7 i V8 (5.7L V8 LS1 225kW)
  • [2002 - 2004] HOLDEN BERLINA VY Wagon 5.7 i V8 (5.7L V8 LS1 225kW)
  • [1993 - 1995] HOLDEN CALAIS VR Sedan 5.0 i V8 (5.0L V8 GMH 304 165kW)
  • [2003 - 2004] HOLDEN CALAIS VY Sedan 5.7 i V8 (5.7L V8 LS1 235kW)
  • [1994 - 1995] HOLDEN CAPRICE VR Sedan 5.0 i V8 (5.0L V8 GMH 304 165kW)
  • [2000 - 2003] HOLDEN CAPRICE WH Sedan 5.7 i V8 (5.7L V8 LS1 225kW)
  • [1993 - 1995] HOLDEN COMMODORE VR Sedan 5.0 i V8 (5.0L V8 GMH 304 165kW)
  • [1993 - 1995] HOLDEN COMMODORE VR Ute 5.0 i V8 (5.0L V8 GMH 304 165kW)
  • [1993 - 1995] HOLDEN COMMODORE VR Wagon 5.0 i V8 (5.0L V8 GMH 304 165kW)
  • [2002 - 2004] HOLDEN COMMODORE VY Sedan 5.7 i V8 (5.7L V8 LS1 235kW)
  • [2002 - 2004] HOLDEN COMMODORE VY Sedan 5.7 i V8 (5.7L V8 LS1 245kW)
  • [2002 - 2004] HOLDEN COMMODORE VY Ute 5.7 i V8 (5.7L V8 LS1 225kW)
  • [2002 - 2004] HOLDEN COMMODORE VY Ute 5.7 i V8 (5.7L V8 LS1 235kW)
  • [2002 - 2004] HOLDEN COMMODORE VY Ute 5.7 i V8 (5.7L V8 LS1 245kW)
  • [2002 - 2004] HOLDEN COMMODORE VY Wagon 5.7 i V8 (5.7L V8 LS1 235kW)
  • [2003 - 2004] HOLDEN CREWMAN VY Ute 5.7 i V8 (5.7L V8 LS1 225kW)
  • [2003 - 2004] HOLDEN CREWMAN VY Ute 5.7 i V8 4x4 (5.7L V8 LS1 225kW)
  • [2003 - 2004] HOLDEN ONE TONNER VY Platform/Chassis 5.7 i V8 (5.7L V8 LS1 235kW)
  • [1994 - 1995] HOLDEN STATESMAN VR Sedan 5.0 i V8 (5.0L V8 GMH 304 165kW)
  • [2002 - 2003] HOLDEN STATESMAN WH Sedan 5.7 i V8 (5.7L V8 LS1 225kW)
  •  
  • [1993 - 1995] HSV CLUBSPORT VR Sedan 5.0 i V8 (5.0L V8 GMH308 185kW)
  • [1993 - 1995] HSV CLUBSPORT VR Wagon 5.0 i V8 (5.0L V8 GMH308 185kW)
  • [1999 - 2000] HSV GRANGE WH Sedan 5.7 i V8 (5.7L V8 LS1 250kW)
  • [2000 - 2003] HSV GRANGE WH Sedan 5.7 i V8 (5.7L V8 LS1 255kW)
  • [1993 - 1995] HSV MALOO VR Ute 5.0 i V8 (5.0L V8 VU 185kW)
  • [1992 - 1993] HSV SENATOR VR Sedan 5.0 i V8 (5.0L V8 VU 185kW)
  • [1994 - 1995] HSV STATESMAN VR Sedan 185i 5.0 (5.0L V8 GMH308 185kW)
How do I test a crankshaft or camshaft position sensor?

Use an OBD2 scanner to check for fault codes P0335 to P0338 (crankshaft) or P0340 to P0349 (camshaft). You can also test the sensor with a multimeter - inductive sensors should show resistance between 200 and 1,000 ohms, while Hall effect sensors require a live voltage test with the engine cranking. Erratic or absent RPM signal on a live data scanner is a strong indicator of sensor failure.

Can a cam or crank sensor fault cause my vehicle to go into limp mode?

Yes. A faulty crankshaft position sensor in particular can cause the ECU to lose engine speed and position data entirely, which may trigger limp mode or prevent the engine from starting. A faulty camshaft sensor on variable valve timing engines can cause the VVT system to default to a fixed position, significantly reducing power and fuel economy.

Do cam and crank sensors need to be programmed after replacement?

In most cases no - aftermarket OEM replacement sensors are direct plug-in replacements that require no programming. However some vehicles, particularly late model European makes including BMW and Mercedes-Benz, may require a crankshaft adaptation reset using a dealer-level scan tool after replacement. Check your vehicle service information before replacing the sensor.

What are the symptoms of a faulty crankshaft position sensor?

Symptoms include intermittent stalling, engine not starting, rough idle, misfires, and a Check Engine light with codes P0335-P0338. In severe cases the engine will crank but not start as the ECU cannot determine crank position for ignition timing.

What are the symptoms of a faulty camshaft position sensor?

Symptoms include poor performance, misfires, difficulty starting, rough idle, and fault codes P0340-P0343. Variable valve timing systems (VVT) will also be affected, causing sluggish response and increased fuel consumption.

Can I drive with a bad crankshaft position sensor?

If the sensor has failed completely the engine will not start or will stall and not restart. If it is intermittently failing, driving is dangerous - the engine can cut out without warning. Replace it immediately.

Do I need to replace both the cam and crank sensor at the same time?

Not necessarily - replace whichever has failed based on fault codes and diagnosis. However, if your vehicle has high kilometres and one has failed, it is worth considering replacing both as they are similar in age and condition.

Identification
SKUCSCA81
BrandAftermarket OEM Replacement
Part Numbers
Part NumberCSCA81
Reference OEM Number10456148
Other OEM Numbers10456148, 8-10456-148-0, 8104561480
Related Part NumbersCAM-001, CSCA81, SC056, SS10025, TCAS287
Trade Part NumbersVEMO: V51-72-0184, NTK-AU: EC0054, DELPHI: SS10213-11B1
Product Specifics
Product TypeSENSOR
Sensor TypeCAMSHAFT POSITION SENSOR
Manufacturer Warranty1 Year
Compatible VehiclesHOLDEN AND HSV 5.0L V8 304 AND 5.7L V8 LS1
Upc9341554001862
Number of pins3-Pin
Connector Shapeoval
Compatible MakesHolden
Fitment TypeDirect Replacement
Other Details
NoteV8 only. The 3.8L V6 uses the same number - see CSCA81-2.
Unit Of Measureea

Be The First To Review This Product!

Help other SENSORGAL LTD. users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category