






Cam Angle Sensor for Holden 3.8L V6 3800 Ecotec & Supercharged Engines 10456148
Direct Fit Replaces 10456148
BRAND NEW *OEM Quality* Cam Angle Sensor to suit Holden Commodore, Calais, Caprice and Statesman 3.8L V6 engines.
A failed cam angle sensor is a very common cause of check engine lights, hot no-starts and rough idle on these Holden V6 motors. This is a direct-fit replacement with the correct 3-pin oval connector and needs no wiring modification. Packed and shipped from Cranbourne VIC.
TO SUIT
This sensor suits the Holden Commodore VR VS VT VU VX VY, Calais VR to VY, Caprice VR to WK and Statesman VQ VR VS WH WK with the L27 3800, L36 and LN3 Ecotec, or L67 Supercharged 3.8L V6, from 1990 to 2004. It also covers the Monaro V2, Crewman and One Tonner VY, HSV Grange WH and XU6 VT VX, and the badge-engineered Toyota Lexcen VR VS.
FITMENT CHECK
This listing is the 3.8L V6 application. The 5.0L V8 304 and 5.7L V8 LS1 carry the same OEM number but are listed separately under CSCA81 - confirm your engine before ordering.
OEM PART NUMBERS
- 10456148
- 8-10456-148-0
- 8104561480
OTHER PART NUMBERS
- VEMO: V51-72-0184
- NTK-AU: EC0054
- DELPHI: SS10213-11B1
- MOBILETRON: CS-U106
- BREMI: 60422
PACKAGE INCLUDES
1 x Cam Angle Sensor - 3-pin oval connector, no additional wiring required.
ABOUT THIS SENSOR
The cam angle sensor reads a reluctor wheel on the camshaft and sends a digital signal to the ECU, which uses it to establish which cylinder is on its firing stroke. Sequential injection and ignition timing on the Ecotec V6 depend on that reference.
When the signal is lost or intermittent the ECU falls back to a fixed timing map or shuts down injection entirely. On these cars that shows up first as a hot no-start, because the sensor breaks down once heat-soaked and recovers as the engine bay cools.
COMMON SYMPTOMS OF FAILURE
- Check engine light with DTC P0340 or P0341
- Engine cranks but will not start when hot
- Rough idle and hunting at low revs
- Misfires or hesitation during acceleration
- Stalling at idle or low speed without warning
- Intermittent loss of power
- [1988 - 1991] HOLDEN BERLINA VN Sedan 3.8 i V6 (3.8L V6 LG2 125kW)
- [1988 - 1991] HOLDEN BERLINA VN Wagon 3.8 i V6 (3.8L V6 LG2 125kW)
- [1991 - 1993] HOLDEN BERLINA VP Sedan 3.8 i V6 (3.8L V6 LG2 127kW)
- [1991 - 1993] HOLDEN BERLINA VP Wagon 3.8 i V6 (3.8L V6 LG2 127kW)
- [1993 - 1995] HOLDEN BERLINA VR Sedan 3.8 i V6 (3.8L V6 LG2 130kW)
- [1993 - 1995] HOLDEN BERLINA VR Wagon 3.8 i V6 (3.8L V6 LG2 130kW)
- [1995 - 1997] HOLDEN BERLINA VS Sedan 3.8 i V6 (3.8L V6 LG2 147kW)
- [1995 - 1997] HOLDEN BERLINA VS Wagon 3.8 i V6 (3.8L V6 LG2 147kW)
- [1997 - 2000] HOLDEN BERLINA VT Sedan 3.8 i V6 (3.8L V6 LN3 147kW)
- [1997 - 2000] HOLDEN BERLINA VT Wagon 3.8 i V6 (3.8L V6 LN3 147kW)
- [1999 - 2000] HOLDEN BERLINA VT Sedan 3.8 i V6 Supercharged (3.8L V6 L67 171kW)
- [2000 - 2002] HOLDEN BERLINA VX Sedan 3.8 i V6 (3.8L V6 LN3 152kW)
- [2000 - 2002] HOLDEN BERLINA VX Sedan 3.8 i V6 Supercharged (3.8L V6 L67 171kW)
- [2000 - 2002] HOLDEN BERLINA VX Wagon 3.8 i V6 (3.8L V6 LN3 152kW)
- [2002 - 2004] HOLDEN BERLINA VY Sedan 3.8 i V6 (3.8L V6 LN3 152kW)
- [2002 - 2004] HOLDEN BERLINA VY Wagon 3.8 i V6 (3.8L V6 LN3 152kW)
- [1988 - 1991] HOLDEN CALAIS VN Sedan 3.8 i V6 (3.8L V6 LG2 125kW)
- [1991 - 1993] HOLDEN CALAIS VP Sedan 3.8 i V6 (3.8L V6 LG2 127kW)
- [1993 - 1995] HOLDEN CALAIS VR Sedan 3.8 i V6 (3.8L V6 LG2 130kW)
- [1995 - 1997] HOLDEN CALAIS VS Sedan 3.8 i V6 (3.8L V6 LG2 147kW)
- [1996 - 1997] HOLDEN CALAIS VS Sedan 3.8 i V6 Supercharged (3.8L V6 L67 165kW)
- [1997 - 2000] HOLDEN CALAIS VT Sedan 3.8 i V6 (3.8L V6 LN3 147kW)
- [1997 - 2000] HOLDEN CALAIS VT Sedan 3.8 i V6 Supercharged (3.8L V6 L67 171kW)
- [2000 - 2002] HOLDEN CALAIS VX Sedan 3.8 i V6 (3.8L V6 LN3 152kW)
- [2000 - 2002] HOLDEN CALAIS VX Sedan 3.8 i V6 Supercharged (3.8L V6 L67 171kW)
- [2002 - 2004] HOLDEN CALAIS VY Sedan 3.8 i V6 (3.8L V6 LN3 152kW)
- [2002 - 2004] HOLDEN CALAIS VY Sedan 3.8 i V6 Supercharged (3.8L V6 L67 171kW)
- [1988 - 1991] HOLDEN COMMODORE VG Ute 3.8 i V6 (3.8L V6 LG2 125kW)
- [1990 - 1991] HOLDEN COMMODORE VG Ute 3.8 i V6 (3.8L V6 LG2 127kW)
- [1988 - 1991] HOLDEN COMMODORE VN Sedan 3.8 i V6 (3.8L V6 LG2 125kW)
- [1988 - 1991] HOLDEN COMMODORE VN Wagon 3.8 i V6 (3.8L V6 LG2 125kW)
- [1991 - 1993] HOLDEN COMMODORE VP Sedan 3.8 i V6 (3.8L V6 LG2 127kW)
- [1991 - 1993] HOLDEN COMMODORE VP Ute 3.8 i V6 (3.8L V6 LG2 127kW)
- [1991 - 1993] HOLDEN COMMODORE VP Wagon 3.8 i V6 (3.8L V6 LG2 127kW)
- [1993 - 1995] HOLDEN COMMODORE VR Sedan 3.8 i V6 (3.8L V6 LG2 130kW)
- [1993 - 1995] HOLDEN COMMODORE VR Ute 3.8 i V6 (3.8L V6 LG2 130kW)
- [1993 - 1995] HOLDEN COMMODORE VR Wagon 3.8 i V6 (3.8L V6 LG2 130kW)
- [1995 - 1997] HOLDEN COMMODORE VS Sedan 3.8 i V6 (3.8L V6 LG2 147kW)
- [1995 - 1997] HOLDEN COMMODORE VS Sedan 3.8 i V6 Supercharged (3.8L V6 L67 165kW)
- [1995 - 1997] HOLDEN COMMODORE VS Wagon 3.8 i V6 (3.8L V6 LG2 147kW)
- [1995 - 2000] HOLDEN COMMODORE VS Ute 3.8 i V6 (3.8L V6 LG2 147kW)
- [1997 - 2000] HOLDEN COMMODORE VT Sedan 3.8 i V6 (3.8L V6 LN3 147kW)
- [1997 - 2000] HOLDEN COMMODORE VT Sedan 3.8 i V6 Supercharged (3.8L V6 L67 171kW)
- [1997 - 2002] HOLDEN COMMODORE VT Wagon 3.8 i V6 (3.8L V6 LN3 147kW)
- [2000 - 2002] HOLDEN COMMODORE VU Ute 3.8 i V6 (3.8L V6 L36(231CUV6) 147kW)
- [2001 - 2002] HOLDEN COMMODORE VU Ute 3.8 i V6 (3.8L V6 LN3 152kW)
- [2000 - 2002] HOLDEN COMMODORE VX Sedan 3.8 i V6 (3.8L V6 LN3 152kW)
- [2000 - 2002] HOLDEN COMMODORE VX Sedan 3.8 i V6 Supercharged (3.8L V6 L67 171kW)
- [2000 - 2002] HOLDEN COMMODORE VX Wagon 3.8 i V6 (3.8L V6 LN3 152kW)
- [2002 - 2004] HOLDEN COMMODORE VY Sedan 3.8 i V6 (3.8L V6 LN3 152kW)
- [2002 - 2004] HOLDEN COMMODORE VY Sedan 3.8 i V6 Supercharged (3.8L V6 L67 171kW)
- [2002 - 2004] HOLDEN COMMODORE VY Ute 3.8 i V6 (3.8L V6 LN3 152kW)
- [2002 - 2004] HOLDEN COMMODORE VY Ute 3.8 i V6 Supercharged (3.8L V6 L67 171kW)
- [2002 - 2004] HOLDEN COMMODORE VY Wagon 3.8 i V6 (3.8L V6 LN3 152kW)
- [1994 - 1995] HOLDEN CAPRICE VR Sedan 3.8 i V6 (3.8L V6 LG2 130kW)
- [1995 - 1998] HOLDEN CAPRICE VS Sedan 3.8 i V6 (3.8L V6 LG2 147kW)
- [1996 - 1999] HOLDEN CAPRICE VS Sedan 3.8 i V6 Supercharged (3.8L V6 L67 165kW)
- [1999 - 2001] HOLDEN CAPRICE WH Sedan 3.8 i V6 (3.8L V6 L36(231CUV6) 147kW)
- [1999 - 2001] HOLDEN CAPRICE WH Sedan 3.8 i V6 Supercharged (3.8L V6 L67 171kW)
- [2001 - 2003] HOLDEN CAPRICE WH Sedan 3.8 i V6 (3.8L V6 L36(231CUV6) 152kW)
- [2003 - 2004] HOLDEN CAPRICE WK Sedan 3.8 i V6 (3.8L V6 L36(231CUV6) 152kW)
- [2003 - 2004] HOLDEN CAPRICE WK Sedan 3.8 i V6 Supercharged (3.8L V6 L67 171kW)
- [1990 - 1993] HOLDEN STATESMAN VQ Sedan 3.8 i V6 (3.8L V6 LG2 127kW)
- [1994 - 1995] HOLDEN STATESMAN VR Sedan 3.8 i V6 (3.8L V6 LG2 130kW)
- [1995 - 1999] HOLDEN STATESMAN VS Sedan 3.8 i V6 (3.8L V6 LG2 147kW)
- [1996 - 1999] HOLDEN STATESMAN VS Sedan 3.8 i V6 Supercharged (3.8L V6 L67 165kW)
- [1999 - 2003] HOLDEN STATESMAN WH Sedan 3.8 i V6 (3.8L V6 L36(231CUV6) 147kW)
- [1999 - 2003] HOLDEN STATESMAN WH Sedan 3.8 i V6 Supercharged (3.8L V6 L67 171kW)
- [2001 - 2003] HOLDEN STATESMAN WH Sedan 3.8 i V6 (3.8L V6 L36(231CUV6) 152kW)
- [2003 - 2004] HOLDEN STATESMAN WK Sedan 3.8 i V6 (3.8L V6 L36(231CUV6) 152kW)
- [2003 - 2004] HOLDEN STATESMAN WK Sedan 3.8 i V6 Supercharged (3.8L V6 L67 171kW)
- [2003 - 2004] HOLDEN CREWMAN VY Ute 3.8 i V6 (3.8L V6 LN3 152kW)
- [2001 - 2003] HOLDEN MONARO V2 Coupe 3.8 (3.8L V6 L67 171kW)
- [2003 - 2004] HOLDEN ONE TONNER VY Platform/Chassis 3.8 i V6 (3.8L V6 LN3 152kW)
- [1988 - 1991] HDT COMMODORE VN Sedan 3.8 Aero (3.8L V6 LG2(231CUV6) 167kW)
- [1997 - 2000] HDT COMMODORE VT Sedan 3.8 Sport (3.8L V6 LN3(231CUV6) 147kW)
- [1989 - 1991] HSV COMMODORE VN Sedan 3.8 i V6 (3.8L V6 LN3 125kW)
- [1989 - 1991] HSV COMMODORE VN Sedan 3.8 i V6 (3.8L V6 LN3 132kW)
- [1992 - 1993] HSV COMMODORE VP Sedan 3.8 i V6 (3.8L V6 LN3 125kW)
- [1999 - 2000] HSV GRANGE WH Sedan 3.8 i V6 Supercharged (3.8L V6 L67 180kW)
- [1991 - 1992] HSV LS VG Ute 3.8 i V6 (3.8L V6 LN3 125kW)
- [1992 - 1993] HSV LS VP Ute 3.8 i V6 (3.8L V6 LN3 127kW)
- [1998 - 2000] HSV XU6 VT Sedan 3.8 i V6 Supercharged (3.8L V6 L67 180kW)
- [2000 - 2002] HSV XU6 VX Sedan 3.8 i V6 Supercharged (3.8L V6 L67 180kW)
- [1989 - 1991] TOYOTA LEXCEN VN Wagon 3.8 (3.8L V6 L36 125kW)
- [1989 - 1991] TOYOTA LEXCEN VN,VP Sedan 3.8 (3.8L V6 L36 125kW)
- [1991 - 1993] TOYOTA LEXCEN VN,VP Sedan 3.8 (3.8L V6 L36 127kW)
- [1991 - 1993] TOYOTA LEXCEN VP Wagon 3.8 (3.8L V6 L36 127kW)
- [1993 - 1995] TOYOTA LEXCEN VR Wagon 3.8 (3.8L V6 L36 130kW)
- [1993 - 1995] TOYOTA LEXCEN VR,VS Sedan 3.8 (3.8L V6 L36 130kW)
- [1993 - 1997] TOYOTA LEXCEN VR,VS Sedan 3.8 (3.8L V6 L36 147kW)
- [1995 - 1997] TOYOTA LEXCEN VS Wagon 3.8 (3.8L V6 L36 147kW)
How do I test a crankshaft or camshaft position sensor?
Use an OBD2 scanner to check for fault codes P0335 to P0338 (crankshaft) or P0340 to P0349 (camshaft). You can also test the sensor with a multimeter - inductive sensors should show resistance between 200 and 1,000 ohms, while Hall effect sensors require a live voltage test with the engine cranking. Erratic or absent RPM signal on a live data scanner is a strong indicator of sensor failure.
Can a cam or crank sensor fault cause my vehicle to go into limp mode?
Yes. A faulty crankshaft position sensor in particular can cause the ECU to lose engine speed and position data entirely, which may trigger limp mode or prevent the engine from starting. A faulty camshaft sensor on variable valve timing engines can cause the VVT system to default to a fixed position, significantly reducing power and fuel economy.
Do cam and crank sensors need to be programmed after replacement?
In most cases no - aftermarket OEM replacement sensors are direct plug-in replacements that require no programming. However some vehicles, particularly late model European makes including BMW and Mercedes-Benz, may require a crankshaft adaptation reset using a dealer-level scan tool after replacement. Check your vehicle service information before replacing the sensor.
What are the symptoms of a faulty crankshaft position sensor?
Symptoms include intermittent stalling, engine not starting, rough idle, misfires, and a Check Engine light with codes P0335-P0338. In severe cases the engine will crank but not start as the ECU cannot determine crank position for ignition timing.
What are the symptoms of a faulty camshaft position sensor?
Symptoms include poor performance, misfires, difficulty starting, rough idle, and fault codes P0340-P0343. Variable valve timing systems (VVT) will also be affected, causing sluggish response and increased fuel consumption.
Can I drive with a bad crankshaft position sensor?
If the sensor has failed completely the engine will not start or will stall and not restart. If it is intermittently failing, driving is dangerous - the engine can cut out without warning. Replace it immediately.
Do I need to replace both the cam and crank sensor at the same time?
Not necessarily - replace whichever has failed based on fault codes and diagnosis. However, if your vehicle has high kilometres and one has failed, it is worth considering replacing both as they are similar in age and condition.
| Identification | |
|---|---|
| SKU | CSCA81-2 |
| Brand | Aftermarket OEM Replacement |
| Part Numbers | |
| Part Number | CSCA81 |
| Reference OEM Number | 10456148 |
| Other OEM Numbers | 10456148, 8-10456-148-0, 8104561480 |
| Related Part Numbers | CAM-001, CSCA81, SC056, SS10025, TCAS287 |
| Trade Part Numbers | VEMO: V51-72-0184, NTK-AU: EC0054, DELPHI: SS10213-11B1 |
| Product Specifics | |
| Product Type | SENSOR |
| Sensor Type | CAMSHAFT POSITION SENSOR |
| Manufacturer Warranty | 1 Year |
| Compatible Vehicles | HOLDEN V6 3800 ECOTEC AND SUPERCHARGED 3.8L MOTOR |
| Upc | 9341554001862 |
| Number of pins | 3-Pin |
| Connector Shape | oval |
| Compatible Makes | Holden |
| Fitment Type | Direct Replacement |
| Other Details | |
| Note | 3.8L V6 only. The V8 uses the same number - see CSCA81. |
| Unit Of Measure | ea |
Be The First To Review This Product!
Help other SENSORGAL LTD. users shop smarter by writing reviews for products you have purchased.