3310065D00 Crankshaft Position Sensor for Suzuki Grand Vitara 2.0L J20A 3310065D00 Crankshaft Position Sensor for Suzuki Grand Vitara 2.0L J20A3310065D00 Crankshaft Position Sensor for Suzuki Grand Vitara 2.0L J20A3310065D00 Crankshaft Position Sensor for Suzuki Grand Vitara 2.0L J20A3310065D00 Crankshaft Position Sensor for Suzuki Grand Vitara 2.0L J20A3310065D00 Crankshaft Position Sensor for Suzuki Grand Vitara 2.0L J20A

3310065D00 Crankshaft Position Sensor for Suzuki Grand Vitara 2.0L J20A

Part #: CSCA422 OEM #: 3310065D00 SKU: CSCA422-3310065D00_1

Aftermarket OEM Replacement Crankshaft Sensor

$69.97
RRP $123.99
SAVE $54.02 (44%)
In Stock

BRAND NEW OEM Quality CAMSHAFT / CRANKSHAFT POSITION SENSOR TO SUIT SUZUKI GRAND VITARA 2.0L J20A Engines

 

THIS SENSOR CAN BE USED BOTH AS A CAMSHAFT SENSOR AND/OR CRANKSHAFT SENSOR. YOU NEED TO PURCHASE 2 OF THESE SENSORS IF YOU WANT TO CHANGE BOTH.

 

Package Includes:

1* CAMSHAFT / CRANKSHAFT POSITION SENSOR (3-PIN PLUG).

 

OEM# 3310065D00

  • [01/99 - 12/05] SUZUKI GRAND VITARA FT SQ420 2.0L 4cyl J20A 94kW
  • [01/98 - 12/05] SUZUKI GRAND VITARA FT SQ420 2.0L 4cyl J20A 94kW
  •  
  • [01/05 - 12/08] SUZUKI GRAND VITARA JT JB420 2.0L 4cyl J20A 103kW
  •  
  • [01/97 - 12/98] SUZUKI WAGON R+ EM 1.0L 4cyl K10A 48kW
How do I test a crankshaft or camshaft position sensor?

Use an OBD2 scanner to check for fault codes P0335 to P0338 (crankshaft) or P0340 to P0349 (camshaft). You can also test the sensor with a multimeter - inductive sensors should show resistance between 200 and 1,000 ohms, while Hall effect sensors require a live voltage test with the engine cranking. Erratic or absent RPM signal on a live data scanner is a strong indicator of sensor failure.

Can a cam or crank sensor fault cause my vehicle to go into limp mode?

Yes. A faulty crankshaft position sensor in particular can cause the ECU to lose engine speed and position data entirely, which may trigger limp mode or prevent the engine from starting. A faulty camshaft sensor on variable valve timing engines can cause the VVT system to default to a fixed position, significantly reducing power and fuel economy.

Do cam and crank sensors need to be programmed after replacement?

In most cases no - aftermarket OEM replacement sensors are direct plug-in replacements that require no programming. However some vehicles, particularly late model European makes including BMW and Mercedes-Benz, may require a crankshaft adaptation reset using a dealer-level scan tool after replacement. Check your vehicle service information before replacing the sensor.

What are the symptoms of a faulty crankshaft position sensor?

Symptoms include intermittent stalling, engine not starting, rough idle, misfires, and a Check Engine light with codes P0335-P0338. In severe cases the engine will crank but not start as the ECU cannot determine crank position for ignition timing.

What are the symptoms of a faulty camshaft position sensor?

Symptoms include poor performance, misfires, difficulty starting, rough idle, and fault codes P0340-P0343. Variable valve timing systems (VVT) will also be affected, causing sluggish response and increased fuel consumption.

Can I drive with a bad crankshaft position sensor?

If the sensor has failed completely the engine will not start or will stall and not restart. If it is intermittently failing, driving is dangerous - the engine can cut out without warning. Replace it immediately.

Do I need to replace both the cam and crank sensor at the same time?

Not necessarily - replace whichever has failed based on fault codes and diagnosis. However, if your vehicle has high kilometres and one has failed, it is worth considering replacing both as they are similar in age and condition.

Identification
SKUCSCA422-3310065D00_1
BrandAftermarket OEM Replacement
Part Numbers
Part NumberCSCA422
Reference OEM Number3310065D00
Other OEM Numbers33100-65D00
Related Part NumbersSC271, CAS-177, J5T23191
Product Specifics
Product TypeSENSOR
Sensor TypeCRANKSHAFT POSITION SENSOR
Number of pins3 -pin connector
Supplementary Article Infowithout cable
Voltage12 V
Housing ColourBlack
Other Details
NoteAlways verify fitment using your vehicle's OEM part number.

Be The First To Review This Product!

Help other SENSORGAL LTD. users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category