Camshaft Sensor for Suzuki Vitara Grand Vitara Ignis Jimny Liana Swift Baleno Camshaft Sensor for Suzuki Vitara Grand Vitara Ignis Jimny Liana Swift BalenoCamshaft Sensor for Suzuki Vitara Grand Vitara Ignis Jimny Liana Swift BalenoCamshaft Sensor for Suzuki Vitara Grand Vitara Ignis Jimny Liana Swift BalenoCamshaft Sensor for Suzuki Vitara Grand Vitara Ignis Jimny Liana Swift BalenoCamshaft Sensor for Suzuki Vitara Grand Vitara Ignis Jimny Liana Swift Baleno

Camshaft Sensor for Suzuki Vitara Grand Vitara Ignis Jimny Liana Swift Baleno

Part #: 3931038050 OEM #: 39310-38050 SKU: 3931038050-Suzuki

Direct Fit Replaces 33100-65D00

$119.97
RRP $223.95
SAVE $103.98 (46%)
In Stock

BRAND NEW OEM Quality CAMSHAFT POSITION SENSOR TO SUIT Suzuki Vitara Grand Vitara Ignis Jimny Liana Swift Baleno

 

TO SUIT:

 

OEM#

39310-38030, 30874179, 3931038050, 3087417-9, 39310-38050,

J005T23071, J005T23071A, J5T23071, J5T23071A, MD327107

  • VEMO: V95-72-0018
  • NTY: ECP-HY-005
  • NTY: ECR-MS-001
  • WALKER PRODUCTS: 235-1051
  • WALKER PRODUCTS: 235-1124

 

PACKAGE INCLUDES:

1 X OEM CAMSHAFT POSITION SENSOR (3-PIN PLUG).

 

The camshaft sensor works with the crankshaft sensor to define the exact position of the crankshaft drive. The engine control unit knows when the first cylinder is at the top dead point through the combination of both sensor signals.

  • [04/95 - 05/02] SUZUKI BALENO SY416 16V 1.6L 4cyl G16B 72kW
  •  
  • [09/05 - 02/15] SUZUKI GRAND VITARA JB420/ TD54 2.0L 4cyl J20A 103kW
  • [03/98 - 08/05] SUZUKI GRAND VITARA SQ416 1.6L 4cyl G16B 69kW
  • [03/98 - 04/05] SUZUKI GRAND VITARA SQ420/ TA52/ TL52 2.0L 4cyl J20A 94kW
  •  
  • [08/03 - 12/05] SUZUKI GNIS HV81/ RG415 1.5L 4cyl M15A 83kW
  • [09/98 - 09/02] SUZUKI JIMNY SN413 16V 1.3L 4cyl G13BB 59kW
  • [03/04 - 08/07] SUZUKI LIANA RH418 1.8L 4cyl M18A 92kW
  • [03/89 - 05/00] SUZUKI SWIFT AA34/ SF413 GTi 1.3L 4cyl G13B 74kW
  • [10/89 - 05/95] SUZUKI SWIFT AH14/ SF416 1.6L 4cyl G16B 68kW
  • [01/04 - 12/11] SUZUKI SWIFT RS415/ ZC21S 1.5L 4cyl M15A 75kW
  •  
  • [10/94 - 12/98] SUZUKI VITARA SE416 16V 1.6L 4cyl G16B 71kW
  • [10/99 - 10/02] SUZUKI VITARA SE416/ TA03 16V 1.6L 4cyl G16B 69kW
  • [10/97 - 07/99] SUZUKI WAGON R+ RC410/ SR410/ SR412 1.0L 4cyl K10A 48kW
  • [04/96 - 12/97] SUZUKI X-90 SZ416 16V 1.6L 4cyl G16B 71kW
How do I test a crankshaft or camshaft position sensor?

Use an OBD2 scanner to check for fault codes P0335 to P0338 (crankshaft) or P0340 to P0349 (camshaft). You can also test the sensor with a multimeter - inductive sensors should show resistance between 200 and 1,000 ohms, while Hall effect sensors require a live voltage test with the engine cranking. Erratic or absent RPM signal on a live data scanner is a strong indicator of sensor failure.

Can a cam or crank sensor fault cause my vehicle to go into limp mode?

Yes. A faulty crankshaft position sensor in particular can cause the ECU to lose engine speed and position data entirely, which may trigger limp mode or prevent the engine from starting. A faulty camshaft sensor on variable valve timing engines can cause the VVT system to default to a fixed position, significantly reducing power and fuel economy.

Do cam and crank sensors need to be programmed after replacement?

In most cases no - aftermarket OEM replacement sensors are direct plug-in replacements that require no programming. However some vehicles, particularly late model European makes including BMW and Mercedes-Benz, may require a crankshaft adaptation reset using a dealer-level scan tool after replacement. Check your vehicle service information before replacing the sensor.

What are the symptoms of a faulty crankshaft position sensor?

Symptoms include intermittent stalling, engine not starting, rough idle, misfires, and a Check Engine light with codes P0335-P0338. In severe cases the engine will crank but not start as the ECU cannot determine crank position for ignition timing.

What are the symptoms of a faulty camshaft position sensor?

Symptoms include poor performance, misfires, difficulty starting, rough idle, and fault codes P0340-P0343. Variable valve timing systems (VVT) will also be affected, causing sluggish response and increased fuel consumption.

Can I drive with a bad crankshaft position sensor?

If the sensor has failed completely the engine will not start or will stall and not restart. If it is intermittently failing, driving is dangerous - the engine can cut out without warning. Replace it immediately.

Do I need to replace both the cam and crank sensor at the same time?

Not necessarily - replace whichever has failed based on fault codes and diagnosis. However, if your vehicle has high kilometres and one has failed, it is worth considering replacing both as they are similar in age and condition.

Identification
SKU3931038050-Suzuki
Barcode #4044079381383
BrandOEM
Part Numbers
Part Number3931038050
Reference OEM Number39310-38050
Other OEM Numbers3931038050, 33100-65D00, MD327107, J5T23071
Related Part NumbersCSCA87, SC271, SC265, SC241
Trade Part NumbersVEMO: V95-72-0018, NTY: ECP-HY-005, WALKER: 235-1051
Product Specifics
Product TypeSENSOR
Sensor TypeCAMSHAFT POSITION SENSOR
Number of pins3 -pin connector
Connector Shaperectangular
Supplementary Article Infowithout cable
Fitting Depth27 mm
Voltage12 V
Housing ColourBlack
Other Details
NoteAlways verify fitment using your vehicle's OEM part number.

Be The First To Review This Product!

Help other SENSORGAL LTD. users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category