Pre-Cat Oxygen Sensor Toyota Hilux Corolla Prius Lexus IS250 GS300 8946730010 Pre-Cat Oxygen Sensor Toyota Hilux Corolla Prius Lexus IS250 GS300 8946730010Pre-Cat Oxygen Sensor Toyota Hilux Corolla Prius Lexus IS250 GS300 8946730010Pre-Cat Oxygen Sensor Toyota Hilux Corolla Prius Lexus IS250 GS300 8946730010Pre-Cat Oxygen Sensor Toyota Hilux Corolla Prius Lexus IS250 GS300 8946730010Pre-Cat Oxygen Sensor Toyota Hilux Corolla Prius Lexus IS250 GS300 8946730010Pre-Cat Oxygen Sensor Toyota Hilux Corolla Prius Lexus IS250 GS300 8946730010

Pre-Cat Oxygen Sensor Toyota Hilux Corolla Prius Lexus IS250 GS300 8946730010

Part #: 8946730010 OEM #: 89467-30010 SKU: 8946730010-TOYOTA

Direct Fit Replaces 89467-30010

$172.97
RRP $237.97
SAVE $65.00 (27%)
In Stock

BRAND NEW *OEM Quality* pre-cat O2 sensor for Toyota Corolla / Hilux 4.0L V6 / Prius and Lexus GS300 / GS450h / IS250 / IS350 / ISF / LS460 and other models.

The 8946730010 is a wideband air-fuel ratio (AFR) sensor mounted upstream of the catalytic converter on the exhaust manifold. A failing AFR sensor triggers fault codes P2195 / P2196 or P0136 / P0141 and forces the ECU into open-loop fuelling — causing higher fuel consumption and failed emissions tests. Ships from Melbourne VIC before 12pm for same-day dispatch.

TO SUIT

FITMENT CHECK

OEM PART NUMBERS

  • 8946730010 / 89467-30010
  • 89467-24010
  • 89467-24020
  • 8946730020
  • 89467-30070

OTHER PART NUMBERS

  • DENSO: 439000-1030 / DOX-0263
  • VEMO: V70-76-002
  • WALKER PRODUCTS: 250-54050
  • BOSCH: F00E262861

PACKAGE INCLUDES

  • 1x Pre-Cat Oxygen Sensor
  • Note: most V6 and V8 models require 2 sensors — see 8946730010-2PACK

ABOUT THIS SENSOR

  • Wideband / Air-Fuel Ratio (AFR) sensor
  • 4-pin connector
  • M18x1.5 thread — pre-greased for installation
  • 250mm total length
  • Heated planar probe design
  • Pre-catalytic converter (upstream) position

COMMON SYMPTOMS OF FAILURE

  • Check Engine light — fault codes P2195 / P2196 / P0136 / P0141
  • Increased fuel consumption
  • Rough idle or poor throttle response
  • Failed emissions test
  • LEXUS GS
  • LEXUS GS300 GRS190R 3.0L V6 3GR-FSE [01/05 - 12/11] 183kW
  • LEXUS GS430 UZS190R 4.3L V8 3UZ-FE [01/05 - 12/11] 208kW
  • LEXUS GS450h GWS191R 3.5L V6 2GR-FSE [01/06 - 12/11] 218kW
  • LEXUS GS460 URS190R 4.6L V8 1UR-FSE [01/07 - 12/11] 255kW
  •  
  • LEXUS IS
  • LEXUS IS250 GSE20R 2.5L V6 4GR-FSE [01/05 - 12/13] 153kW
  • LEXUS IS250c GSE20R 2.5L V6 4GR-FSE [01/09 - 12/14] 153kW
  • LEXUS IS350 GSE21R 3.5L V6 2GR-FSE [01/08 - 12/13] 234kW
  • LEXUS ISF USE20R 5.0L V8 2UR-GSE [01/08 - 12/14] 311kW
  •  
  • LEXUS LS
  • LEXUS LS460 USF40R 4.6L V8 1UR-FSE [01/06 - 12/17] 280kW
  • LEXUS LS600h UVF45R 5.0L V8 2UR-FSE [01/13 - 12/17] 290kW
  • LEXUS LS600hL UVF46R 5.0L V8 2UR-FSE [01/07 - 12/12] 290kW
  •  
  • TOYOTA COROLLA
  • TOYOTA COROLLA ZRE152R 1.8L 4cyl 2ZR-FE [03/07 - 10/13] 100kW
  •  
  • TOYOTA HILUX
  • TOYOTA HILUX GGN15R 4.0L V6 1GR-FE [01/05 - 12/15]
  • TOYOTA HILUX GGN25R 4.0L V6 1GR-FE [01/05 - 12/15]
  • TOYOTA HILUX GGN25R 4.0L V6 1GR-FE TRD [01/08 - 12/09]
  •  
  • TOYOTA PRIUS
  • TOYOTA PRIUS NHW20R 1.5L 4cyl 1NZ-FXE [09/03 - 04/09] 57kW
  • TOYOTA PRIUS ZVW30R 1.8L 4cyl 2ZR-FXE [05/09 - 12/15] 73kW
How do I replace an oxygen sensor?

Most O2 sensors thread directly into the exhaust pipe or manifold. You will need an O2 sensor socket (22mm with a slot for the wire) and penetrating oil if the sensor is seized. Allow the exhaust to cool completely before starting. Some sensors also require a wiring harness connector to be unplugged. Always clear fault codes with an OBD2 scanner after replacement.

What fault codes does a faulty O2 sensor trigger?

A faulty O2 sensor typically triggers codes P0130 to P0167. The specific code indicates which sensor has failed - P0130 to P0138 relate to Bank 1 sensors and P0150 to P0158 relate to Bank 2 sensors. An OBD2 scanner will identify the exact sensor location.

Can I use a universal O2 sensor on my vehicle?

Universal sensors can work but require splicing the wiring harness which introduces risk of connection faults. A direct-fit aftermarket OEM replacement sensor with the correct connector plugs directly in with no cutting or splicing required. SensorGal stocks direct-fit sensors cross-referenced to OEM part numbers for most Australian vehicles.

How do I know if my O2 sensor is bad?

Common signs include poor fuel economy, rough idle, failed emissions test, rotten egg smell from the exhaust, and a Check Engine light with codes P0130-P0167. An OBD2 scanner showing a flat or sluggish O2 sensor waveform on live data also indicates a faulty sensor.

What is the difference between upstream and downstream O2 sensors?

The upstream (pre-cat) sensor monitors exhaust gases to help the ECU calculate fuel trim. The downstream (post-cat) sensor monitors catalytic converter efficiency. They serve different functions and are not interchangeable even if they look identical.

Can a bad O2 sensor damage my catalytic converter?

Yes. A faulty upstream O2 sensor can cause the engine to run rich, sending unburnt fuel into the catalytic converter. Over time this overheats and destroys the catalyst. Replacing the O2 sensor promptly protects your catalytic converter.

How many O2 sensors does my vehicle have?

Most 4-cylinder vehicles have two O2 sensors (one upstream, one downstream). V6 and V8 engines typically have four - one upstream and one downstream per bank. Contact us with your vehicle details and we will confirm the correct quantity and part numbers.

Identification
SKU8946730010-TOYOTA
BrandAftermarket OEM Replacement
Part Numbers
Part Number8946730010
Reference OEM Number89467-30010
Other OEM Numbers89467-24010, 89467-24020, 8946730010, 8946730020, 89467-30070
Related Part Numbers439000-1030, DOX-0263, F00E262861
Trade Part NumbersDENSO: DOX-0263, VEMO: V70-76-002
Product Specifics
Product TypeSENSOR
Sensor TypeA/F Ratio (Wideband)
Placement On VehiclePRE-CAT
Fitting PositionExhaust Manifold
Thread SizeM18x1.5
Number of pins4-Pin
Compatible MakesLexus / Toyota
Fitment TypeDirect Replacement
Total Length250mm
Other Details
Note4-pin connector - M18x1.5 thread - 250mm total length

Be The First To Review This Product!

Help other SENSORGAL LTD. users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category