Name: Oxygen Sensor 86465-60200 Toyota Lexus Aftermarket OEM Replacement
Brand: Aftermarket OEM Replacement
SKU: OS-T451P
Price: 143.97 AUD
Availability: InStock

BRAND NEW OEM Quality OXYGEN SENSOR (LAMBDA SENSOR) TO SUIT TOYOTA AND LEXUS VARIOUS VEHICLES

TO SUIT:

FITS LOTS OF TOYOTA HIACE, HILUX, LANDCRUISER PRADO, CAMRY, AURION, AVALON, CELICA, CHASER, CROWN, ECHO, COROLLA, MR2, PASEO, PRIUS, RAV4,

TARAGO, TUNDRA, YARIS, SUPRA ESTIMA , 4RUNNER

LEXUS ES GS GS-F IS RC MCV20 GWL10 URL10 GXE10 JCE10 USC10

DAHITSU PYZAR SIRION TERIOS YRV

SUBARU IMPREZA, LIBERTY, OUTBACK

AND LOTS MORE MAKES AND MODELS

NOTE: CABLE LENGTH IS MORE THAN 50 CM AND SUITABLE FOR LOTS OF VEHICLES THAT ARE NOT COVERED IN THIS LISTING.

FITS PRE-CAT OR POST-CAT BASED ON VEHICLE APPLICATION. SOME VEHICLES USE 2 OF THEM.

BEST WAY IS TO CHECK PLUG IMAGES IN THE LISTING AND COMPARE IT WITH YOUR ORIGINAL SENSOR.

OEM# 86465-60200, 89465-33130, 89465-30190, 8946512540

PACKAGE INCLUDES:

1 X OEM Quality OXYGEN SENSOR (4-PIN Connector) PRE-CAT / POST-CAT O2 SENSOR BASED ON VEHICLE APPLICATION. SOME VEHICLES GOT 2.

An oxygen sensor is generally mounted in the exhaust stream of vehicles to measure the oxygen content of the exhaust gases. The sensor will compare the oxygen content to the oxygen proportion in the air and pass that information back to the vehicle's Engine Control Module(ECU). to allow the adjustment of the air-fuel ratio so that a car's engine can work at its optimal fuel efficiency level.

POPULAR OEM PART NUMBERS:

DOX-0205, DOX-0109, 0258986606, A2C59513876Z, ES20118, ES20268, 6PA358066-321

OTHER OEM NUMBERS THAT CAN BE REPLACED:

SUBARU: 22690AA68A
SUBARU: 22690AA900
TOYOTA: 86465-60200
TOYOTA: 89465-01090
TOYOTA: 89465-05050
TOYOTA: 89465-05120
TOYOTA: 89465-05130
TOYOTA: 89465-06010
TOYOTA: 89465-08010
TOYOTA: 89465-12400
TOYOTA: 89465-12540
TOYOTA: 89465-14120
TOYOTA: 89465-14140
TOYOTA: 89465-14200
TOYOTA: 89465-14220
TOYOTA: 89465-14230
TOYOTA: 89465-20450
TOYOTA: 89465-20510
TOYOTA: 89465-20520
TOYOTA: 89465-20560
TOYOTA: 89465-20640
TOYOTA: 89465-20680
TOYOTA: 89465-20710
TOYOTA: 89465-20720
TOYOTA: 89465-20800
TOYOTA: 89465-20840
TOYOTA: 89465-20851
TOYOTA: 89465-24200
TOYOTA: 89465-28220
TOYOTA: 89465-30180
TOYOTA: 89465-30190
TOYOTA: 89465-30250
TOYOTA: 89465-30360
TOYOTA: 89465-30410
TOYOTA: 89465-30440
TOYOTA: 89465-30630
TOYOTA: 89465-30660
TOYOTA: 89465-30790
TOYOTA: 89465-30800
TOYOTA: 89465-32160
TOYOTA: 89465-33030
TOYOTA: 89465-33130
TOYOTA: 89465-33160
TOYOTA: 89465-33170
TOYOTA: 89465-36030
TOYOTA: 89465-39815
TOYOTA: 89465-44010
TOYOTA: 89465-44040
TOYOTA: 89465-45010
TOYOTA: 89465-47060
TOYOTA: 89465-47070
TOYOTA: 89465-48020
TOYOTA: 89465-52060
TOYOTA: 89465-52070
TOYOTA: 89465-52120
TOYOTA: 89465-52200
TOYOTA: 89465-52220
TOYOTA: 89465-52280
TOYOTA: 89465-52430
TOYOTA: 89465-52450
TOYOTA: 89465-52500
TOYOTA: 89465-53040
TOYOTA: 89465-53090
TOYOTA: 89465-53130
TOYOTA: 89465-53140
TOYOTA: 89465-53210
TOYOTA: 89465-60200
TOYOTA: 89465-68010

How do I replace an oxygen sensor?

Most O2 sensors thread directly into the exhaust pipe or manifold. You will need an O2 sensor socket (22mm with a slot for the wire) and penetrating oil if the sensor is seized. Allow the exhaust to cool completely before starting. Some sensors also require a wiring harness connector to be unplugged. Always clear fault codes with an OBD2 scanner after replacement.

What fault codes does a faulty O2 sensor trigger?

A faulty O2 sensor typically triggers codes P0130 to P0167. The specific code indicates which sensor has failed - P0130 to P0138 relate to Bank 1 sensors and P0150 to P0158 relate to Bank 2 sensors. An OBD2 scanner will identify the exact sensor location.

Can I use a universal O2 sensor on my vehicle?

Universal sensors can work but require splicing the wiring harness which introduces risk of connection faults. A direct-fit aftermarket OEM replacement sensor with the correct connector plugs directly in with no cutting or splicing required. SensorGal stocks direct-fit sensors cross-referenced to OEM part numbers for most Australian vehicles.

How do I know if my O2 sensor is bad?

Common signs include poor fuel economy, rough idle, failed emissions test, rotten egg smell from the exhaust, and a Check Engine light with codes P0130-P0167. An OBD2 scanner showing a flat or sluggish O2 sensor waveform on live data also indicates a faulty sensor.

What is the difference between upstream and downstream O2 sensors?

The upstream (pre-cat) sensor monitors exhaust gases to help the ECU calculate fuel trim. The downstream (post-cat) sensor monitors catalytic converter efficiency. They serve different functions and are not interchangeable even if they look identical.

Can a bad O2 sensor damage my catalytic converter?

Yes. A faulty upstream O2 sensor can cause the engine to run rich, sending unburnt fuel into the catalytic converter. Over time this overheats and destroys the catalyst. Replacing the O2 sensor promptly protects your catalytic converter.

How many O2 sensors does my vehicle have?

Most 4-cylinder vehicles have two O2 sensors (one upstream, one downstream). V6 and V8 engines typically have four - one upstream and one downstream per bank. Contact us with your vehicle details and we will confirm the correct quantity and part numbers.

Identification
SKU	OS-T451P
Brand	Aftermarket OEM Replacement
Part Numbers
Part Number	234-4626
Reference OEM Number	86465-60200
Other OEM Numbers	86465-60200, 89465-33130, 89465-30190, 8946512540
Related Part Numbers	OZA669-EE33, OZA670-EE11, OZA722-EE25
Trade Part Numbers	OX453, OX598
Product Specifics
Product Type	SENSOR
Sensor Type	Oxygen Sensor
Placement On Vehicle	PRE-CAT / POST-CAT BASED ON VEHICLE APPLICATION
Features	Heated, Finger probe, Thread pre-greased, Lambda Sensor
Thread Size	M18x1.5
Number of pins	4 -pin connector
Supplementary Article Info	Isolated Ground, Planar Type, Zirconia Type
Cable Length	530 mm
Other Details
Note	Always verify fitment using your vehicle's OEM part number.