Camshaft Position Sensor Kia Sportage KM QL SL 2.0L G4NA G4GC DOHC 2005-2020 Camshaft Position Sensor Kia Sportage KM QL SL 2.0L G4NA G4GC DOHC 2005-2020Camshaft Position Sensor Kia Sportage KM QL SL 2.0L G4NA G4GC DOHC 2005-2020Camshaft Position Sensor Kia Sportage KM QL SL 2.0L G4NA G4GC DOHC 2005-2020Camshaft Position Sensor Kia Sportage KM QL SL 2.0L G4NA G4GC DOHC 2005-2020Camshaft Position Sensor Kia Sportage KM QL SL 2.0L G4NA G4GC DOHC 2005-2020Camshaft Position Sensor Kia Sportage KM QL SL 2.0L G4NA G4GC DOHC 2005-2020Camshaft Position Sensor Kia Sportage KM QL SL 2.0L G4NA G4GC DOHC 2005-2020Camshaft Position Sensor Kia Sportage KM QL SL 2.0L G4NA G4GC DOHC 2005-2020

Camshaft Position Sensor Kia Sportage KM QL SL 2.0L G4NA G4GC DOHC 2005-2020

Part #: CSCA395-Sportage OEM #: 3935023910 SKU: CSCA395-Sportage

Direct Fit Replaces 3935023910

$62.45
RRP $123.19
SAVE $60.74 (49%)
In Stock

BRAND NEW *OEM Quality* Camshaft Position Sensor to suit Kia Sportage 2.0L petrol engines.

Misfire, rough idle, or check engine light on your Sportage? A worn camshaft sensor is a common cause on these engines. This is a direct-fit replacement, packed and shipped from Cranbourne VIC.

TO SUIT

This sensor suits the Kia Sportage JE/KM 16V (2007-2010) 2.0L G4GC, Sportage SL GDI (2014-2015) 2.0L G4NC, and Sportage QL/QLE (2015-2022) 2.0L G4NA. 3-pin connector.

OEM PART NUMBERS

  • 3935023910
  • 39350-23910
  • 39350-23700
  • 3935023700

OTHER PART NUMBERS

  • NTY: ECP-HY-014
  • VEMO: V53-72-0116
  • WALKER: 235-1273

PACKAGE INCLUDES

1 x Camshaft Position Sensor - 3-pin connector, supplied without cable, with seal ring.

ABOUT THIS SENSOR

The camshaft sensor works with the crankshaft sensor to tell the ECU the exact position of the camshaft relative to the crankshaft, so it knows when each cylinder reaches top dead centre.

A worn or failing sensor causes the ECU to lose accurate cylinder timing, leading to misfires, rough running, and in some cases sudden stalling.

COMMON SYMPTOMS OF FAILURE

  • Difficulty starting the vehicle
  • Intermittent stalling
  • Check engine light on
  • Uneven acceleration
  • Engine misfires or vibrates
  • Rough idle
  • [11/07 - 08/10] KIA SPORTAGE JE/KM 2.0L G4GC Euro 4 104kW
  • [02/14 - 09/15] KIA SPORTAGE SL GDI 2.0L G4NC 122kW
  • [12/15 - 09/22] KIA SPORTAGE QL/QLE 2.0L G4NA 114kW
How do I test a crankshaft or camshaft position sensor?

Use an OBD2 scanner to check for fault codes P0335 to P0338 (crankshaft) or P0340 to P0349 (camshaft). You can also test the sensor with a multimeter - inductive sensors should show resistance between 200 and 1,000 ohms, while Hall effect sensors require a live voltage test with the engine cranking. Erratic or absent RPM signal on a live data scanner is a strong indicator of sensor failure.

Can a cam or crank sensor fault cause my vehicle to go into limp mode?

Yes. A faulty crankshaft position sensor in particular can cause the ECU to lose engine speed and position data entirely, which may trigger limp mode or prevent the engine from starting. A faulty camshaft sensor on variable valve timing engines can cause the VVT system to default to a fixed position, significantly reducing power and fuel economy.

Do cam and crank sensors need to be programmed after replacement?

In most cases no - aftermarket OEM replacement sensors are direct plug-in replacements that require no programming. However some vehicles, particularly late model European makes including BMW and Mercedes-Benz, may require a crankshaft adaptation reset using a dealer-level scan tool after replacement. Check your vehicle service information before replacing the sensor.

What are the symptoms of a faulty crankshaft position sensor?

Symptoms include intermittent stalling, engine not starting, rough idle, misfires, and a Check Engine light with codes P0335-P0338. In severe cases the engine will crank but not start as the ECU cannot determine crank position for ignition timing.

What are the symptoms of a faulty camshaft position sensor?

Symptoms include poor performance, misfires, difficulty starting, rough idle, and fault codes P0340-P0343. Variable valve timing systems (VVT) will also be affected, causing sluggish response and increased fuel consumption.

Can I drive with a bad crankshaft position sensor?

If the sensor has failed completely the engine will not start or will stall and not restart. If it is intermittently failing, driving is dangerous - the engine can cut out without warning. Replace it immediately.

Do I need to replace both the cam and crank sensor at the same time?

Not necessarily - replace whichever has failed based on fault codes and diagnosis. However, if your vehicle has high kilometres and one has failed, it is worth considering replacing both as they are similar in age and condition.

Identification
SKUCSCA395-Sportage
Barcode #4046001956782
BrandAftermarket OEM Replacement
Part Numbers
Part NumberCSCA395-Sportage
Reference OEM Number3935023910
Other OEM Numbers3935023910, 3935023700, 39350-23700, 39350-23910
Related Part NumbersSC239GEN, CAS1247, EC0289, SS11353
Trade Part NumbersVEMO: V53-72-0116, WALKER: 235-1273
Product Specifics
Sensor TypeCAMSHAFT POSITION SENSOR
TypeSensor
FeaturesDirect Fit
Manufacturer Warranty1 Year
Ean4046001956782
Number of pins3 -pin connector
Connector Shaperectangular
Supplementary Article Infowithout cable with seal ring
Fitting Depth28 mm
Rated Voltage12 V
Housing ColourBlack
Other Details
NoteAlways verify fitment using your vehicle's OEM part number.
Unit Of Measureea

Be The First To Review This Product!

Help other SENSORGAL LTD. users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category