DPF Pressure Sensor for BMW 118d 120d 123d E82 E87 E88 F20 F21 DPF Pressure Sensor for BMW 118d 120d 123d E82 E87 E88 F20 F21 DPF Pressure Sensor for BMW 118d 120d 123d E82 E87 E88 F20 F21 DPF Pressure Sensor for BMW 118d 120d 123d E82 E87 E88 F20 F21

DPF Pressure Sensor for BMW 118d 120d 123d E82 E87 E88 F20 F21

Part #: SCMS328 Replaces OEM: 13627789219

OEM Spec Fit Replaces 13627789219

$87.49
RRP $187.99
SAVE $100.50 (53%)
In Stock

BRAND NEW *OEM Quality* DPF differential pressure sensor to suit BMW 1 Series 118d 120d 123d 2.0L diesel.

A 1 Series that flashes the DPF light, or feels flat and keeps regenerating on short trips, may only need a new pressure sensor. A cheap first check. Packed and shipped from Cranbourne VIC.

TO SUIT

BMW 118d, 120d and 123d E82 coupe, E87 hatch, E88 convertible, F20 and F21 with the M47 and N47 2.0L diesel, 2004 to 2015, all with a factory fitted DPF. The full year and engine list is in the compatibility table on this page.

FITMENT CHECK

This sensor is shared across several BMW and Mini models. Compare the sensor image and the OEM number printed on your original sensor before ordering. Early M47 engines and rows shown with a year only come from the supplier catalogue, so check the number on your sensor first. It has a 3-pin D-shaped plug and a clip-in mount.

OEM PART NUMBERS

  • 13627789219
  • 13627797517
  • 13627804862
  • 13627805152
  • 7797517
  • 7805152

OTHER PART NUMBERS

  • 6PP 009 409-021
  • ECS-BM-000

PACKAGE INCLUDES

1 x DPF differential pressure sensor with 3-pin D-shaped connector. Pressure hoses and clips are not included.

ABOUT THIS SENSOR

The sensor measures the pressure difference before and after the diesel particulate filter so the engine computer can judge how full the filter is and when to start a regen.

A false reading means regens that start too often or too late, and a filter that blocks early. Fault codes in the P2452 to P2455 range point at this circuit.

COMMON SYMPTOMS OF FAILURE

  • DPF warning light on the dash
  • Limp mode and reduced power
  • Regens too often or not starting
  • Higher fuel consumption
  • Fault codes P2452 P2453 P2454 P2455
  • [01/09 - 12/11] BMW 118d E87 (2.0L 4cyl N47 D20 C 105kW)
  • [2004 - 2007] BMW 118d E87 (2.0L 4cyl M47 D20 (204D4) 90kW)
  • [01/09 - 12/13] BMW 118d E88 (2.0L 4cyl N47 D20 C 105kW)
  • [01/11 - 12/15] BMW 118d F20 (2.0L 4cyl N47 D20 C 105kW)
  • [2011 - 2015] BMW 118d F21 (2.0L 4cyl N47 D20 C 105kW)
  • [2007 - 2010] BMW 120d E87 (2.0L 4cyl M47 D20 (204D4)/N47 D20 A 120kW)
  • [01/09 - 12/13] BMW 123d E82 (2.0L 4cyl N47 D20 D 150kW)
  • [01/09 - 12/11] BMW 123d E87 (2.0L 4cyl N47 D20 D 150kW)
  • [01/09 - 12/13] BMW 123d E88 (2.0L 4cyl N47 D20 D 150kW)
What is the difference between a DPF differential pressure sensor and an exhaust gas temperature sensor?

The DPF differential pressure sensor measures the pressure difference across the diesel particulate filter to determine how blocked it is with soot. The exhaust gas temperature (EGT) sensor measures the actual temperature of exhaust gases at a specific point in the exhaust system. Both sensors are used by the ECU to manage DPF regeneration - the pressure sensor triggers regeneration when the filter is blocked, and the temperature sensor monitors whether regeneration temperatures have been reached.

What are the symptoms of a faulty DPF pressure or temperature sensor?

Both sensor types can cause similar symptoms when they fail. Common signs include a DPF warning light on the dashboard, the engine entering limp mode with restricted power, failed or incomplete DPF regeneration cycles, increased fuel consumption from excessive regeneration attempts, loss of power under acceleration, and a Check Engine light with DPF or exhaust temperature fault codes. In some cases the vehicle may be locked out of further DPF regeneration until the fault is resolved.

Will a faulty DPF sensor damage the DPF itself?

Yes - indirectly. If the DPF pressure sensor fails and prevents the ECU from triggering regeneration correctly, soot accumulation will continue unmanaged. Over time an unmanaged DPF will become completely blocked, requiring forced regeneration by a workshop or DPF replacement. Similarly a faulty EGT sensor that prevents the ECU from confirming regeneration temperatures can cause repeated incomplete regeneration attempts that accelerate DPF loading.

Can I drive with a DPF or EGT sensor fault?

Short distances only. A DPF sensor fault will typically trigger limp mode on modern diesel vehicles, restricting power significantly. Even if limp mode is not triggered, driving with an unmanaged DPF blockage risks complete filter failure. EGT sensor faults can also prevent the turbocharger from receiving correct protection data, risking turbo damage under sustained high load. Both faults should be addressed promptly.

How many EGT sensors does my vehicle have?

Most modern diesel vehicles with a DPF have two or more EGT sensors - typically one upstream of the DPF and one downstream. Some vehicles also have additional sensors before and after the turbocharger and catalytic converter. Each sensor monitors a different temperature zone and feeds separate data to the ECU. A fault code will specify which sensor position has failed. Use the Vehicle Part Finder to confirm the correct sensor for your specific mounting position.

Do DPF and EGT sensors require programming after replacement?

No programming is required. Both are direct plug-in replacement sensors. Clear stored fault codes with an OBD2 scanner after replacement. If DPF regeneration was previously prevented by the sensor fault, you may need to initiate a forced regeneration using a scan tool to clear accumulated soot before returning the vehicle to normal service.

Identification
BrandAftermarket OEM Replacement
Part Numbers
Part NumberSCMS328
Reference OEM Number13627789219
Other OEM Numbers13627789219, 13627797517, 13627804862, 13627805152
Related Part NumbersCMS328, DP106, DPS00004, EPS-011
Interchange Part Numbers6PP 009 409-021, ECS-BM-000, 7797517, 7805152
Product Specifics
Product TypeSENSOR
Sensor TypeDiesel Particulate Filter (DPF) Differential Pressure Sensor
Fitting PositionBefore soot particulate filter
Number of pins3-Pin
Connector ShapeD-shaped
Mounting TypeClipped
Compatible MakesBMW
Fitment TypeDirect Replacement
Other Details
Note3-pin D-shaped plug. Compare your plug before ordering.
Unit Of Measureea

Be The First To Review This Product!

Help other SENSORGAL LTD. users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category