DPF Pressure Sensor for BMW 530d 730d X3 X5 X6 X7 30d M50d B57 3.0L DPF Pressure Sensor for BMW 530d 730d X3 X5 X6 X7 30d M50d B57 3.0L DPF Pressure Sensor for BMW 530d 730d X3 X5 X6 X7 30d M50d B57 3.0L DPF Pressure Sensor for BMW 530d 730d X3 X5 X6 X7 30d M50d B57 3.0L

DPF Pressure Sensor for BMW 530d 730d X3 X5 X6 X7 30d M50d B57 3.0L

Part #: SDP135 Replaces OEM: 13628585292

Direct Fit Replaces 13628585292

$142.99
RRP $347.99
SAVE $205.00 (59%)
In Stock

BRAND NEW *OEM Quality* DPF differential pressure sensor to suit BMW 530d, 730d, X3, X5, X6 and X7 with the B57 3.0L six cylinder diesel.

A BMW that shows a DPF warning or loses power under load can often be fixed with a new pressure sensor before you pay for a new filter. A cheap first check. Packed and shipped from Cranbourne VIC.

TO SUIT

BMW 530d G30, 730d G11, X3 xDrive30d G01, X5 xDrive30d and M50d G05, X6 xDrive30d G06 and X7 xDrive30d and M50d G07 with the B57 3.0L diesel, 2015 to 2023, all with a factory fitted DPF. The full year and engine list is in the compatibility table on this page.

FITMENT CHECK

It has a 3-pin oval plug, so compare your plug and the OEM number printed on your original sensor before ordering. The 2.0L four cylinder B47 models are listed separately. Rows shown with a year only come from the supplier catalogue, so check the number on your sensor first.

OEM PART NUMBERS

  • 13628585292
  • 8585292

OTHER PART NUMBERS

  • V20-72-0159
  • DPS00050-12B1

PACKAGE INCLUDES

1 x DPF differential pressure sensor with 3-pin oval connector. Pressure hoses and mounting hardware are not included.

ABOUT THIS SENSOR

The sensor measures the pressure difference across the diesel particulate filter so the engine computer knows how full the filter is and when to start a regen.

A false reading means regens that start too often or too late, and a filter that blocks early. Fault codes in the P2452 to P2455 range point at this circuit.

COMMON SYMPTOMS OF FAILURE

  • DPF warning light on the dash
  • Limp mode and reduced power
  • Regens too often or not starting
  • Higher fuel consumption
  • Fault codes P2452 P2453 P2454 P2455
  • [09/16 - 06/20] BMW 5 F90/G30 530 d (3.0L 6cyl B57 D30 A 195kW)
  • [09/15 - 06/20] BMW 7 G11/G12 730 d (3.0L 6cyl B57 D30 A 195kW)
  • [08/17 - 06/20] BMW X3 F97/G01/G08 xDrive 30 d (3.0L 6cyl B57 D30 A 195kW)
  • [2020 - 2023] BMW X3 F97/G01 xDrive 30 d Mild-Hybrid (3.0L 6cyl B57 D30 B 210kW)
  • [08/18 - 07/20] BMW X5 F95/G05 xDrive 30 d (3.0L 6cyl B57 D30 A 195kW)
  • [08/18 - 11/19] BMW X5 F95/G05 xDrive M 50 d (3.0L 6cyl B57 D30 C 294kW)
  • [2020 - 2023] BMW X5 F95/G05 xDrive 30 d Mild-Hybrid (3.0L 6cyl B57 D30 B 210kW)
  • [08/19 - 07/20] BMW X6 F96/G06 xDrive 30 d (3.0L 6cyl B57 D30 A 195kW)
  • [03/19 ON] BMW X7 G07 xDrive 30 d (3.0L 6cyl B57 D30 A 195kW)
  • [03/19 ON] BMW X7 G07 xDrive M 50 d (3.0L 6cyl B57 D30 C 294kW)
What is the difference between a DPF differential pressure sensor and an exhaust gas temperature sensor?

The DPF differential pressure sensor measures the pressure difference across the diesel particulate filter to determine how blocked it is with soot. The exhaust gas temperature (EGT) sensor measures the actual temperature of exhaust gases at a specific point in the exhaust system. Both sensors are used by the ECU to manage DPF regeneration - the pressure sensor triggers regeneration when the filter is blocked, and the temperature sensor monitors whether regeneration temperatures have been reached.

What are the symptoms of a faulty DPF pressure or temperature sensor?

Both sensor types can cause similar symptoms when they fail. Common signs include a DPF warning light on the dashboard, the engine entering limp mode with restricted power, failed or incomplete DPF regeneration cycles, increased fuel consumption from excessive regeneration attempts, loss of power under acceleration, and a Check Engine light with DPF or exhaust temperature fault codes. In some cases the vehicle may be locked out of further DPF regeneration until the fault is resolved.

Will a faulty DPF sensor damage the DPF itself?

Yes - indirectly. If the DPF pressure sensor fails and prevents the ECU from triggering regeneration correctly, soot accumulation will continue unmanaged. Over time an unmanaged DPF will become completely blocked, requiring forced regeneration by a workshop or DPF replacement. Similarly a faulty EGT sensor that prevents the ECU from confirming regeneration temperatures can cause repeated incomplete regeneration attempts that accelerate DPF loading.

Can I drive with a DPF or EGT sensor fault?

Short distances only. A DPF sensor fault will typically trigger limp mode on modern diesel vehicles, restricting power significantly. Even if limp mode is not triggered, driving with an unmanaged DPF blockage risks complete filter failure. EGT sensor faults can also prevent the turbocharger from receiving correct protection data, risking turbo damage under sustained high load. Both faults should be addressed promptly.

How many EGT sensors does my vehicle have?

Most modern diesel vehicles with a DPF have two or more EGT sensors - typically one upstream of the DPF and one downstream. Some vehicles also have additional sensors before and after the turbocharger and catalytic converter. Each sensor monitors a different temperature zone and feeds separate data to the ECU. A fault code will specify which sensor position has failed. Use the Vehicle Part Finder to confirm the correct sensor for your specific mounting position.

Do DPF and EGT sensors require programming after replacement?

No programming is required. Both are direct plug-in replacement sensors. Clear stored fault codes with an OBD2 scanner after replacement. If DPF regeneration was previously prevented by the sensor fault, you may need to initiate a forced regeneration using a scan tool to clear accumulated soot before returning the vehicle to normal service.

Identification
BrandAftermarket OEM Replacement
Part Numbers
Part NumberSDP135
Reference OEM Number13628585292
Other OEM Numbers8585292, 13628585292
Related Part NumbersDP135, DPS00050
Interchange Part NumbersECS-BM-009, V20-72-0159
Product Specifics
Product TypeSENSOR
Sensor TypeExhaust (DPF) Differential Pressure Sensor
Fitting PositionBefore soot particulate filter
Number of pins3-Pin
Connector Shapeoval
Number of mounting bores1
Compatible MakesBMW
Fitment TypeDirect Replacement
Other Details
Note3-pin oval plug. Compare your plug before ordering.

Be The First To Review This Product!

Help other SENSORGAL LTD. users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category