Crankshaft Sensor 391802B000 for Hyundai Elantra AD MD & i30 GD 1.8L G4NB Crankshaft Sensor 391802B000 for Hyundai Elantra AD MD & i30 GD 1.8L G4NBCrankshaft Sensor 391802B000 for Hyundai Elantra AD MD & i30 GD 1.8L G4NBCrankshaft Sensor 391802B000 for Hyundai Elantra AD MD & i30 GD 1.8L G4NBCrankshaft Sensor 391802B000 for Hyundai Elantra AD MD & i30 GD 1.8L G4NBCrankshaft Sensor 391802B000 for Hyundai Elantra AD MD & i30 GD 1.8L G4NBCrankshaft Sensor 391802B000 for Hyundai Elantra AD MD & i30 GD 1.8L G4NBCrankshaft Sensor 391802B000 for Hyundai Elantra AD MD & i30 GD 1.8L G4NBCrankshaft Sensor 391802B000 for Hyundai Elantra AD MD & i30 GD 1.8L G4NBCrankshaft Sensor 391802B000 for Hyundai Elantra AD MD & i30 GD 1.8L G4NB

Crankshaft Sensor 391802B000 for Hyundai Elantra AD MD & i30 GD 1.8L G4NB

Part #: 391802B000 OEM #: 39180-2B000 SKU: 391802B000-CSCA399-3

Direct Fit Replaces 391802B000

$97.99
RRP $137.00
SAVE $39.01 (28%)
In Stock

BRAND NEW *OEM Quality* crankshaft sensor for Hyundai Elantra AD/MD sedans and i30 GD/GD II hatchbacks fitted with the 1.8L G4NB or 2.0L G4NA engine.

On these Elantra and i30 platforms a failing sensor commonly shows up first as a rough idle before progressing to a stall. Same-day dispatch before 12pm from Melbourne.

TO SUIT

Fits the Hyundai Elantra AD sedan (2015-2020, 2.0L G4NA) and Elantra MD sedan (2011-2015, 1.8L G4NB), plus the i30 GD (2012-2014) and i30 GD II (2014-2017) hatchback with the 1.8L G4NB engine.

FITMENT CHECK

This sensor is not suitable for vehicles fitted with Idle Stop and Go (ISG) - those use a different sensor. Confirm your engine code and OEM number match before ordering.

OEM PART NUMBERS

  • 391802B000
  • 39180-2B000
  • 39180-2B100

OTHER PART NUMBERS

  • BOSCH: 0986280497
  • VEMO: V52-72-0105-1
  • WALKER PRODUCTS: 235-1456

PACKAGE INCLUDES

1 x Crankshaft Position Sensor (2-pin oval connector, black housing, 230mm cable).

ABOUT THIS SENSOR

The Elantra and i30 share the same crank sensor mounting across the 1.8L G4NB and 2.0L G4NA engines, reading crankshaft position to time ignition and injection.

On this platform a degrading signal typically appears first as a rough or uneven idle at traffic lights, well before it escalates to a stall.

COMMON SYMPTOMS OF FAILURE

  • Rough or uneven idle, especially at a stop
  • Check engine light with fault code P0335 or P0336
  • Engine stalls without warning while driving
  • Uneven acceleration
  • Difficulty restarting when hot
  • [01/15 - 12/20] HYUNDAI ELANTRA AD 2.0L 4cyl G4NA 112kW
  •  
  • [01/11 - 12/15] HYUNDAI ELANTRA MD 1.8L 4cyl G4NB 110kW
  •  
  • [01/12 - 12/14] HYUNDAI I30 GD 1.8L 4cyl G4NB 107kW
  •  
  • [01/14 - 12/17] HYUNDAI I30 GD II 1.8L 4cyl G4NB 107kW
How do I test a crankshaft or camshaft position sensor?

Use an OBD2 scanner to check for fault codes P0335 to P0338 (crankshaft) or P0340 to P0349 (camshaft). You can also test the sensor with a multimeter - inductive sensors should show resistance between 200 and 1,000 ohms, while Hall effect sensors require a live voltage test with the engine cranking. Erratic or absent RPM signal on a live data scanner is a strong indicator of sensor failure.

Can a cam or crank sensor fault cause my vehicle to go into limp mode?

Yes. A faulty crankshaft position sensor in particular can cause the ECU to lose engine speed and position data entirely, which may trigger limp mode or prevent the engine from starting. A faulty camshaft sensor on variable valve timing engines can cause the VVT system to default to a fixed position, significantly reducing power and fuel economy.

Do cam and crank sensors need to be programmed after replacement?

In most cases no - aftermarket OEM replacement sensors are direct plug-in replacements that require no programming. However some vehicles, particularly late model European makes including BMW and Mercedes-Benz, may require a crankshaft adaptation reset using a dealer-level scan tool after replacement. Check your vehicle service information before replacing the sensor.

What are the symptoms of a faulty crankshaft position sensor?

Symptoms include intermittent stalling, engine not starting, rough idle, misfires, and a Check Engine light with codes P0335-P0338. In severe cases the engine will crank but not start as the ECU cannot determine crank position for ignition timing.

What are the symptoms of a faulty camshaft position sensor?

Symptoms include poor performance, misfires, difficulty starting, rough idle, and fault codes P0340-P0343. Variable valve timing systems (VVT) will also be affected, causing sluggish response and increased fuel consumption.

Can I drive with a bad crankshaft position sensor?

If the sensor has failed completely the engine will not start or will stall and not restart. If it is intermittently failing, driving is dangerous - the engine can cut out without warning. Replace it immediately.

Do I need to replace both the cam and crank sensor at the same time?

Not necessarily - replace whichever has failed based on fault codes and diagnosis. However, if your vehicle has high kilometres and one has failed, it is worth considering replacing both as they are similar in age and condition.

Identification
SKU391802B000-CSCA399-3
BrandAftermarket OEM Replacement
Part Numbers
Part Number391802B000
Reference OEM Number39180-2B000
Other OEM Numbers391802B000, 39180-2B000, 39180 2B000, 39180-2B100
Related Part NumbersCSCA399, SC447GEN, CAS2015, EH0055, CAS-257, TCAS413, SS11307
Trade Part NumbersBOSCH: 0986280497, VEMO: V52-72-0105-1, WALKER: 235-1456
Product Specifics
Product TypeSENSOR
Sensor TypeCRANKSHAFT POSITION SENSOR
Number of pins2-Pin
Connector Shapeoval
Rated Voltage12V
Housing ColourBlack
Resistor1,035 Ohm
Cable Length230mm
Compatible MakesHyundai
Fitment TypeDirect Replacement
Other Details
NoteNot for vehicles fitted with Idle Stop and Go (ISG).

Be The First To Review This Product!

Help other SENSORGAL LTD. users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category