Name: Crank Angle Sensor for Mercedes Vito Viano Valente W638 W639 CDI 1996-2015
Brand: Aftermarket OEM Replacement
SKU: CSCA267-CAS-105-2
Price: 89.97 AUD
Availability: InStock

BRAND NEW *OEM Quality* crank angle sensor for Mercedes-Benz Vito, Viano and Valente W638 and W639.

A worn crank angle sensor on the Vito / Viano causes rough idle, stalling and hard starting. This direct-fit replacement restores an accurate crankshaft position signal to the ECU. Same-day dispatch from Cranbourne VIC.

TO SUIT

Fits the Mercedes-Benz Vito / Mixto W639 CDI van (2003-2015), the Viano W639 CDI and V6 petrol people mover (2003-2015), the Valente W639 bus (2003-2015), and the earlier Vito W638 petrol and CDI (1996-2003).

OEM PART NUMBERS

A0031532828
31532728
31532828
6519050000

OTHER PART NUMBERS

Bosch: 0261210170
Delphi: SS10925
Hella: 6PU 009 110-851
Meyle: 014 899 0007
Vemo: V30-72-0111-1
NTK-AU: EH0269
Walker Products: 235-1120

PACKAGE INCLUDES

1 x Crank Angle Sensor, 2-pin D-shaped connector.

ABOUT THIS SENSOR

The crank angle sensor reads crankshaft position and speed and feeds it to the ECU, which sets fuel injection and ignition timing on the CDI engine.

On high-kilometre Vito and Viano vans this sensor is a common cause of an intermittent no-start, especially after the vehicle has been sitting overnight.

COMMON SYMPTOMS OF FAILURE

Difficulty starting or no-start condition
Intermittent stalling, especially at idle
Check engine light - fault code P0335 or P0336
Rough or fluctuating idle
Engine misfire or hesitation under load
Noticeable loss of power, especially under load

[09/07 - 02/15] MERCEDES-BENZ MIXTO,VITO 639.601,639.603 111 CDI (2.1L 4cyl OM 646.982,OM 646.980 Euro 4 85kW)
[08/06 - 02/15] MERCEDES-BENZ MIXTO,VITO 639.601,639.603,639.... 109 CDI (2.1L 4cyl OM 646.981,OM 646.980 70kW)
[09/03 - 02/15] MERCEDES-BENZ MIXTO,VITO 639.601,639.603,639.... 109 CDI (2.1L 4cyl OM 646.983 65kW)
[09/10 - 02/15] MERCEDES-BENZ MIXTO,VITO 639.601,639.603,639.... 110 CDI (2.1L 4cyl OM 651.940 70kW)
[09/10 - 02/15] MERCEDES-BENZ MIXTO,VITO 639.601,639.603,639.... 113 CDI (2.1L 4cyl OM 651.940 100kW)
[07/06 - 02/15] MERCEDES-BENZ MIXTO,VITO 639.601,639.603,639.... 115 CDI (2.1L 4cyl OM 646.982 Euro 4 110kW)
[07/05 - 02/15] MERCEDES-BENZ MIXTO,VITO 639.601,639.603,639.... 115 CDI (2.1L 4cyl OM 646.982,OM 646.980 Euro 4 110kW)
[09/10 - 02/15] MERCEDES-BENZ MIXTO,VITO 639.601,639.603,639.... 116 CDI (2.1L 4cyl OM 651.940 120kW)
[04/04 - 07/05] MERCEDES-BENZ MIXTO,VITO 639.601,639.603,639.... 119 (3.2L V6 M 112.951 140kW)
[03/06 - 02/15] MERCEDES-BENZ MIXTO,VITO 639.601,639.603,639.... 120 CDI (3.0L V6 OM 642.990 150kW)
[09/07 - 02/15] MERCEDES-BENZ VALENTE 639.701,639.703,639.... 111 CDI (2.1L 4cyl OM 646.980 85kW)
[09/10 - 02/15] MERCEDES-BENZ VALENTE 639.701,639.703,639.... 113 CDI (2.1L 4cyl OM 651.940 100kW)
[07/05 - 02/15] MERCEDES-BENZ VALENTE 639.701,639.703,639.... 115 CDI (2.1L 4cyl OM 646.982,OM 646.980 Euro 4 110kW)
[09/10 - 02/15] MERCEDES-BENZ VALENTE 639.701,639.703,639.... 116 CDI (2.1L 4cyl OM 651.940 120kW)
[04/04 - 07/05] MERCEDES-BENZ VALENTE 639.701,639.703,639.... 119 (3.2L V6 M 112.951 140kW)
[03/06 - 02/15] MERCEDES-BENZ VIANO 639.711,639.713,639.... CDI (2.1L 4cyl OM 646.982 Euro 4 85kW)
[09/03 - 02/15] MERCEDES-BENZ VIANO 639.711,639.713,639.... CDI (2.1L 4cyl OM 646.982,OM 646.980 Euro 4 110kW)
[07/10 - 02/15] MERCEDES-BENZ VIANO 639.711,639.713,639.... CDI (2.1L 4cyl OM 651.940 100kW)
[07/10 - 04/15] MERCEDES-BENZ VIANO 639.711,639.713,639.... CDI (2.1L 4cyl OM 651.940 100kW)
[07/10 - 04/15] MERCEDES-BENZ VIANO 639.711,639.713,639.... CDI (2.1L 4cyl OM 651.940 120kW)
[06/04 - 07/07] MERCEDES-BENZ VIANO 639.811,639.813,639.... (3.7L V6 M 112.976 165kW)
[06/04 - 02/15] MERCEDES-BENZ VIANO 639.815 (3.7L V6 M 112.976 170kW)
[10/14 - ] MERCEDES-BENZ VITO 447.701,447.703,447.... 116 CDI / 116 BlueTEC (2.1L 4cyl OM 651.950 120kW)
[02/98 - 07/03] MERCEDES-BENZ VITO 638.014,638.094 113 (2.0L 4cyl M 111.948,M 111.950 95kW)
[03/97 - 07/03] MERCEDES-BENZ VITO 638.034,638.094 114 (2.3L 4cyl M 111.978,M 111.980 105kW)
[03/99 - 07/03] MERCEDES-BENZ VITO 638.094 108 CDI (2.1L 4cyl OM 611.980 60kW)
[03/99 - 07/03] MERCEDES-BENZ VITO 638.094 112 CDI (2.1L 4cyl OM 611.980 90kW)
[02/96 - 07/03] MERCEDES-BENZ VITO 638.114,638.194 113 (2.0L 4cyl M 111.948,M 111.950 95kW)

How do I test a crankshaft or camshaft position sensor?

Use an OBD2 scanner to check for fault codes P0335 to P0338 (crankshaft) or P0340 to P0349 (camshaft). You can also test the sensor with a multimeter - inductive sensors should show resistance between 200 and 1,000 ohms, while Hall effect sensors require a live voltage test with the engine cranking. Erratic or absent RPM signal on a live data scanner is a strong indicator of sensor failure.

Can a cam or crank sensor fault cause my vehicle to go into limp mode?

Yes. A faulty crankshaft position sensor in particular can cause the ECU to lose engine speed and position data entirely, which may trigger limp mode or prevent the engine from starting. A faulty camshaft sensor on variable valve timing engines can cause the VVT system to default to a fixed position, significantly reducing power and fuel economy.

Do cam and crank sensors need to be programmed after replacement?

In most cases no - aftermarket OEM replacement sensors are direct plug-in replacements that require no programming. However some vehicles, particularly late model European makes including BMW and Mercedes-Benz, may require a crankshaft adaptation reset using a dealer-level scan tool after replacement. Check your vehicle service information before replacing the sensor.

What are the symptoms of a faulty crankshaft position sensor?

Symptoms include intermittent stalling, engine not starting, rough idle, misfires, and a Check Engine light with codes P0335-P0338. In severe cases the engine will crank but not start as the ECU cannot determine crank position for ignition timing.

What are the symptoms of a faulty camshaft position sensor?

Symptoms include poor performance, misfires, difficulty starting, rough idle, and fault codes P0340-P0343. Variable valve timing systems (VVT) will also be affected, causing sluggish response and increased fuel consumption.

Can I drive with a bad crankshaft position sensor?

If the sensor has failed completely the engine will not start or will stall and not restart. If it is intermittently failing, driving is dangerous - the engine can cut out without warning. Replace it immediately.

Do I need to replace both the cam and crank sensor at the same time?

Not necessarily - replace whichever has failed based on fault codes and diagnosis. However, if your vehicle has high kilometres and one has failed, it is worth considering replacing both as they are similar in age and condition.

Identification
SKU	CSCA267-CAS-105-2
Barcode #	9314258730079
Brand	Aftermarket OEM Replacement
Part Numbers
Part Number	CSCA267
Reference OEM Number	A0031532828
Other OEM Numbers	31532728, 31532828, 6519050000, A0031532828
Related Part Numbers	0261210170, 0261210171, CAS-105, CSCA267, SC385
Trade Part Numbers	BOSCH: 0261210170, VEMO: V30-72-0111-1, NTK-AU: EH0269
Product Specifics
Product Type	SENSOR
Sensor Type	CRANKSHAFT POSITION SENSOR
Fitting Position	Flywheel Side / Rear
Number of pins	2-Pin
Connector Shape	D-shaped
Mounting Type	Bolted
Number of mounting bores	1
Compatible Makes	Mercedes-Benz
Fitment Type	Direct Replacement
Other Details
Note	Always verify fitment using your vehicle's OEM part number.
Unit Of Measure	ea