Coolant Temperature Sensor for Mini Cooper Clubman Countryman F54 F55 F56 F57
OEM Spec Fit Replaces 13621433077
BRAND NEW *OEM Quality* Engine Coolant Temperature Sensor to suit Mini Cooper Clubman F54, Countryman F60, Hatch F55/F56 and Convertible F57.
This sensor is a common wear item across the current-generation Mini range, and a failed unit will throw the ECU's fuel mixture and idle control off, along with the coolant temperature gauge.
TO SUIT
Fits Mini Cooper and Cooper S variants of the Clubman F54, Countryman F60, Hatch F55/F56 (including John Cooper Works) and Convertible F57, built from 2013 onward.
OEM PART NUMBERS
- 7788077
- 1433077
- 13621433077
- 13627788077
OTHER PART NUMBERS
- V20-72-0441
- 6PT 009 309-541
- ECT-BM-012
PACKAGE INCLUDES
1 x OEM Quality Engine Coolant Temperature Sensor (2-pin connector, with seal ring).
ABOUT THIS SENSOR
The current Mini range shares its three-cylinder and four-cylinder BMW-sourced engines across the Hatch, Clubman and Countryman body styles, which is why the same coolant sensor and connector suits the whole line-up including the John Cooper Works Hatch.
A worn sensor is a common cause of an inaccurate temperature gauge and rough idle on these models.
COMMON SYMPTOMS OF FAILURE
- Check engine light with a coolant temperature fault code
- Temperature gauge reading incorrectly or stuck
- Rough idle or hesitation when cold
- Cooling fan running constantly or not at all
- Poor fuel economy
- [2014 - 2026] MINI Clubman F54 Wagon Cooper S (2.0L 4cyl B48 A20 A,B48 A20 F,B46 A20 A 141kW)
- [2015 - 2021] MINI Clubman F54 Wagon Cooper (1.5L 3cyl B38 A15 A,B36 A15 A 100kW)
- [2016 - 2026] MINI Countryman F60 Wagon Cooper (1.5L 3cyl B38 A15 A,B38 A15 F,B36 A15 A 100kW)
- [2016 - 2026] MINI Countryman F60 Wagon Cooper S (2.0L 4cyl B48 A20 A,B46 A20 A 141kW)
- [2013 - 2026] MINI Mini F56 Hatchback Cooper (1.5L 3cyl B38 A15 A,B38 A15 F,B36 A15 A 100kW)
- [2014 - 2026] MINI Mini F55 Hatchback Cooper (1.5L 3cyl B38 A15 A,B38 A15 F,B36 A15 A 100kW)
- [2015 - 2026] MINI Mini F56 Hatchback John Cooper Works (2.0L 4cyl B48 A20 B,B46 A20 B 170kW)
- [2015 - 2026] MINI Mini F57 Convertible Cooper (1.5L 3cyl B38 A15 A,B38 A15 F,B36 A15 A 100kW)
How do I test a coolant temperature sensor?
The most common test is to measure the sensor resistance with a multimeter at a known coolant temperature and compare against the manufacturer resistance curve. A cold engine (20 degrees C) typically reads 2,000 to 3,000 ohms and drops to around 200 to 300 ohms at operating temperature (90 degrees C). An OBD2 scanner showing a fixed temperature reading that does not change as the engine warms up is also a strong indicator of sensor failure.
Can a faulty coolant temperature sensor cause my engine to overheat?
Indirectly yes. If the sensor reports a lower temperature than actual, the ECU may not activate the cooling fan at the correct time, allowing the engine to overheat. It can also suppress the dashboard warning light, meaning you may not be alerted until the engine is already at a dangerously high temperature. Replace a suspected faulty sensor promptly.
Do I need to drain the coolant to replace the sensor?
Not always - many coolant temperature sensors can be replaced quickly with minimal coolant loss if you work fast and have a replacement ready to thread in immediately. However on some vehicles the sensor location requires partial coolant drainage. Check the sensor position on your specific engine before starting. Always use fresh coolant when topping up after replacement.
What are the symptoms of a faulty coolant temperature sensor?
Symptoms include poor fuel economy, black smoke, engine overheating warning, incorrect temperature gauge reading, hard starting when cold, and rough idle. Fault codes P0115 to P0119 are commonly associated with coolant temperature sensor faults.
Is it safe to drive with a bad coolant temperature sensor?
A faulty coolant temperature sensor can cause the ECU to run rich fuel mixtures and prevent the cooling fan from operating correctly, risking engine overheating. Replace it promptly - it is a low-cost part that can prevent expensive engine damage.
How do I know if my coolant temperature sensor or my thermostat is faulty?
A faulty thermostat typically causes the engine to overheat or never reach operating temperature. A faulty coolant temp sensor causes incorrect gauge readings and running issues but the coolant itself may be at the correct temperature. An OBD2 scanner showing live coolant temp data helps distinguish between the two.
Are there two coolant temperature sensors on my vehicle?
Many vehicles have two sensors - one for the ECU (engine management) and one for the dashboard temperature gauge. They look similar but are not interchangeable. Check your vehicle's service manual or contact us with your vehicle details to confirm which sensor you need.
| Identification | |
|---|---|
| SKU | CCS56-Mini |
| Brand | Aftermarket OEM Replacement |
| Part Numbers | |
| Part Number | CCS56 |
| Reference OEM Number | 13621433077 |
| Other OEM Numbers | 7788077, 1433077, 13621433077, 13627788077 |
| Related Part Numbers | CCS56, CS881, CTS1070, TCS140, TS10485, TX128 |
| Trade Part Numbers | V20-72-0441, 6PT 009 309-541, ECT-BM-012 |
| Product Specifics | |
| Product Type | SENSOR |
| Sensor Type | ENGINE COOLANT TEMPERATURE SENSOR |
| Placement On Vehicle | Bottom Radiator Hose |
| Features | Direct Fit |
| Manufacturer Warranty | 1 Year |
| Number Of Sensors | 1 |
| Fitting Position | Radiator, Right, Lower |
| Number of pins | 2 -pin connector |
| Connector Shape | rectangular |
| Supplementary Article Info | with seal ring |
| Housing Colour | Black |
| Mounting Type | Plugged |
| Housing Diameter | 12.95 mm |
| Fastening Type | Pin Fixing |
| Compatible Makes | Mini |
| Fitment Type | Direct Replacement |
| Other Details | |
| Note | Always verify fitment using your vehicle's OEM part number. |
| Unit Of Measure | ea |
Be The First To Review This Product!
Help other SENSORGAL LTD. users shop smarter by writing reviews for products you have purchased.