Camshaft Position Sensor for Nissan 23731-6J906 Suits Exhaust / Right Hand Side Camshaft Position Sensor for Nissan 23731-6J906 Suits Exhaust / Right Hand SideCamshaft Position Sensor for Nissan 23731-6J906 Suits Exhaust / Right Hand SideCamshaft Position Sensor for Nissan 23731-6J906 Suits Exhaust / Right Hand SideCamshaft Position Sensor for Nissan 23731-6J906 Suits Exhaust / Right Hand SideCamshaft Position Sensor for Nissan 23731-6J906 Suits Exhaust / Right Hand SideCamshaft Position Sensor for Nissan 23731-6J906 Suits Exhaust / Right Hand Side

Camshaft Position Sensor for Nissan 23731-6J906 Suits Exhaust / Right Hand Side

Part #: CSCA514 OEM #: 237316J906 SKU: CSCA514-237316J906

Aftermarket OEM Replacement Camshaft Position Sensor

$87.99
RRP $149.99
SAVE $62.00 (41%)
In Stock

BRAND NEW OEM Quality CAMSHAFT POSITION SENSOR TO SUIT VARIOUS NISSAN 

 

Package Includes:

1* CAMSHAFT POSITION SENSOR (3-PIN PLUG).Straight Plug. Suits Exhaust / Right Hand Side

 

OEM# 23731-5M015,3731-5M016, 23731-6J902, 23731-6J905, 23731-6J906, 23731-6J90A, 23731-6J90B

 

TO SUIT:

 

Please Note: it is a Straight Plug Sensor. Suits Exhaust / Right Hand Side

  • [03/03 - 12/06] NISSAN 350Z Z33 3.5L V6 VQ35DE
  • [07/02 - 12/06] NISSAN 350Z Z33 3.5L V6 VQ35DE
  • [01/07 - 04/09] NISSAN 350Z Z33 3.5L V6 VQ35HR 230kW
  • [01/07 - 04/07] NISSAN 350Z Z33 3.5L V6 VQ35HR 230kW
  •  
  • [07/02 - 07/10] NISSAN ELGRAND E51 (GREY IMPORT) 2.5L V6 VQ25DE 134kW
  • [12/03 - 12/05] NISSAN MAXIMA J31 3.5L V6 VQ35DE
  • [01/06 - 05/09] NISSAN MAXIMA J31 3.5L V6 VQ35DE
  • [01/05 - 12/08] NISSAN MURANO Z50 3.5L V6 VQ35DE
  •  
  • [12/05 - 12/11] NISSAN NAVARA D40 (05-15) 4.0L V6 VQ40DE 198kW
  •  
  • [07/05 - 12/10] NISSAN PATHFINDER R51 4.0L V6 VQ40DE 198kW
  •  
  • [06/01 - 10/06] NISSAN SKYLINE V35 (GREY IMPORT) 2.5L V6 VQ25DD 158kW
  • [06/03 - 10/06] NISSAN SKYLINE V35 (GREY IMPORT) 3.5L V6 VQ35DE
  • [06/01 - 10/06] NISSAN SKYLINE V35 (GREY IMPORT) 3.5L V6 VQ35DE
  •  
  • [10/01 - 09/07] NISSAN STAGEA M35 (GREY IMPORT) 2.5L V6 VQ25DET
  • [10/01 - 09/07] NISSAN STAGEA M35 (GREY IMPORT) 3.5L V6 VQ35DE
  • [10/01 - 09/07] NISSAN STAGEA M35 (GREY IMPORT) 3.5L V6 VQ35DE
How do I test a crankshaft or camshaft position sensor?

Use an OBD2 scanner to check for fault codes P0335 to P0338 (crankshaft) or P0340 to P0349 (camshaft). You can also test the sensor with a multimeter - inductive sensors should show resistance between 200 and 1,000 ohms, while Hall effect sensors require a live voltage test with the engine cranking. Erratic or absent RPM signal on a live data scanner is a strong indicator of sensor failure.

Can a cam or crank sensor fault cause my vehicle to go into limp mode?

Yes. A faulty crankshaft position sensor in particular can cause the ECU to lose engine speed and position data entirely, which may trigger limp mode or prevent the engine from starting. A faulty camshaft sensor on variable valve timing engines can cause the VVT system to default to a fixed position, significantly reducing power and fuel economy.

Do cam and crank sensors need to be programmed after replacement?

In most cases no - aftermarket OEM replacement sensors are direct plug-in replacements that require no programming. However some vehicles, particularly late model European makes including BMW and Mercedes-Benz, may require a crankshaft adaptation reset using a dealer-level scan tool after replacement. Check your vehicle service information before replacing the sensor.

What are the symptoms of a faulty crankshaft position sensor?

Symptoms include intermittent stalling, engine not starting, rough idle, misfires, and a Check Engine light with codes P0335-P0338. In severe cases the engine will crank but not start as the ECU cannot determine crank position for ignition timing.

What are the symptoms of a faulty camshaft position sensor?

Symptoms include poor performance, misfires, difficulty starting, rough idle, and fault codes P0340-P0343. Variable valve timing systems (VVT) will also be affected, causing sluggish response and increased fuel consumption.

Can I drive with a bad crankshaft position sensor?

If the sensor has failed completely the engine will not start or will stall and not restart. If it is intermittently failing, driving is dangerous - the engine can cut out without warning. Replace it immediately.

Do I need to replace both the cam and crank sensor at the same time?

Not necessarily - replace whichever has failed based on fault codes and diagnosis. However, if your vehicle has high kilometres and one has failed, it is worth considering replacing both as they are similar in age and condition.

Identification
SKUCSCA514-237316J906
Barcode #9341554096110
BrandAftermarket OEM Replacement
Part Numbers
Part NumberCSCA514
Reference OEM Number237316J906
Other OEM Numbers 237316J90B, 237316J906, 23731-6J90A
Related Part Numbers0986JG1628, CAM-075, SC268, CSCA514
Trade Part Numbers23731-5M015,3731-5M016, 23731-6J902, 23731-6J905
Product Specifics
Product TypeSENSOR
Sensor TypeCAMSHAFT POSITION SENSOR
MakeNissan
Connector Shapeoval
Supplementary Article Infofor camshaft, without cable, for crankshaft
Number of connectors3 -pin connector
Fitting Depth37.8 mm
Rated Voltage12 V
Other Details
NoteAlways verify fitment using your vehicle's OEM part number.

Be The First To Review This Product!

Help other SENSORGAL LTD. users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category