Boost Pressure Sensor for Mercedes Actros Atego Axor Vario Truck Replaces
Workshop Grade Replaces A0041531828
BRAND NEW *OEM Quality* boost pressure sensor to suit Mercedes-Benz Actros, Atego, Axor and Vario trucks.
A failed boost sensor puts a heavy truck into limp mode with no turbo power. This replacement gets the fleet moving again and is dispatched same day from Cranbourne VIC.
TO SUIT
- Mercedes-Benz Actros MP1 / MP2 / MP3 (1840, 1843, 1848, 2543, 2648, 3340 and more)
- Mercedes-Benz Atego 1 and 2 (815, 818, 1018, 1218, 1223, 1523 and more)
- Mercedes-Benz Axor 1 and 2 (1823, 1828, 1835, 1840, 2528, 2540 and more)
- Mercedes-Benz Vario W670 (613D, 614D, 813D, 814D, 815D, 816D - OM904 engine)
OEM PART NUMBERS
- A0041531828
- A0041531928
- A5411504233
- 0041531828
- 41531828
- 41531928
- 5411504233
OTHER PART NUMBERS
- 0281002244
- 4.62926
- 6PP 013 400-031
- 291098
- 92064
- 01.17.076
PACKAGE INCLUDES
1 x boost pressure / MAP sensor, 4-pin oval plug.
ABOUT THIS SENSOR
The sensor measures turbo boost pressure in the intake manifold so the engine ECU can meter fuel and control the turbocharger. On Mercedes truck engines a bad reading triggers engine protection.
Vibration and heat on heavy vehicles wear the internal element, so the signal drifts or drops out and the truck loses power. Backed by our returns policy.
COMMON SYMPTOMS OF FAILURE
- Limp mode or engine derate with low power
- Boost pressure fault on the dash
- Black smoke under load
- Poor acceleration when loaded
- Higher fuel consumption
What fault codes does a faulty MAP sensor trigger?
A faulty MAP sensor typically triggers codes P0105 to P0109. P0105 indicates a circuit malfunction, P0106 indicates the signal is out of range, P0107 and P0108 indicate the signal is too low or too high respectively, and P0109 indicates an intermittent circuit fault. These codes combined with symptoms such as poor idle and black smoke are strong indicators of MAP sensor failure.
How do I test a MAP sensor?
With an OBD2 scanner in live data mode, the MAP sensor should read close to atmospheric pressure (around 101 kPa) with the engine off, and drop to 30 to 50 kPa at idle with the engine running due to manifold vacuum. Under wide open throttle the reading should rise back toward atmospheric. A sensor that reads flat or does not respond to throttle changes has failed. You can also test supply voltage and signal output with a multimeter.
Can I drive with a faulty MAP sensor?
You can drive short distances but engine performance will be noticeably degraded. The ECU uses the MAP sensor to calculate fuel delivery - a faulty sensor causes incorrect fuelling which leads to poor economy, rough running, and increased emissions. On turbocharged engines a faulty MAP sensor can also prevent boost control from operating correctly. Replace it as soon as possible to avoid further damage.
What does a MAP sensor do?
The Manifold Absolute Pressure (MAP) sensor measures intake manifold pressure to help the ECU calculate the correct fuel and ignition timing. It is critical for engine efficiency, particularly on turbocharged and supercharged vehicles.
What are the symptoms of a faulty MAP sensor?
Symptoms include poor acceleration, rough idle, excessive fuel consumption, black smoke, engine hesitation, and a Check Engine light with codes P0105-P0109. Turbocharged vehicles may also experience boost control issues.
What is the difference between a MAP sensor and a MAF sensor?
A MAF (Mass Air Flow) sensor directly measures the mass of air entering the engine. A MAP sensor measures manifold pressure and the ECU calculates air mass from that reading. Many vehicles use one or the other; some use both. They are not interchangeable.
| Identification | |
|---|---|
| Brand | Aftermarket OEM Replacement |
| Part Numbers | |
| Part Number | S0281002244 |
| Reference OEM Number | A0041531828 |
| Other OEM Numbers | A0041531828, A0041531928, A5411504233, 0041531828 |
| Related Part Numbers | DS-LDF4-T, EPBBPT4-V024Z, 15101, 4.62926 |
| Interchange Part Numbers | 0281002244, 4.62926 |
| Product Specifics | |
| Sensor Type | Manifold Absolute Pressure (MAP) Sensor |
| Type | Sensor |
| Features | Direct Fit |
| Manufacturer Warranty | 1 Year |
| Number Of Sensors | 1 |
| Number of pins | 4 -pin connector |
| Connector Shape | oval |
| Supplementary Article Info | with integrated air temperature sensor |
| Pressure Range | 40 kPa until 360 kPa |
| Number of mounting bores | 2 |
| Other Details | |
| Note | Always verify fitment using your vehicle's OEM part number. |
| Unit Of Measure | ea |
Be The First To Review This Product!
Help other SENSORGAL LTD. users shop smarter by writing reviews for products you have purchased.