BRAND NEW *OEM Quality* rear main crankshaft seal for Mitsubishi Lancer vehicles.

A worn rear main crankshaft seal lets engine oil weep past the back of the crankshaft, often showing up as a slow leak near the bell housing or a slipping clutch on manual Lancer models. Dispatched same-day from Cranbourne VIC.

TO SUIT

This seal fits Mitsubishi Lancer CA,CB, CC, CC2A, CD,CE, CE models from 1988 to 2004. See the full model and engine breakdown below for exact coverage.

FITMENT CHECK

Confirm your Lancer is fitted with the OEM number 21443-22000 before ordering, as Lancer spans several chassis codes and engine families across this production run.

OEM PART NUMBERS

21443-22000
21443-22010
MD008885
MD016549
MD117643
MD372250

OTHER PART NUMBERS

Elring: 034.530
Victor Reinz: 81-53306-00

PACKAGE INCLUDES

1 x Rear Main Crankshaft Seal, 72mm ID x 96mm OD x 9mm.

ABOUT THIS SEAL

The rear main seal sits on the crankshaft flange at the transmission end of the Lancer engine, keeping oil inside the crankcase while the crankshaft spins freely.

On Lancer models this seal hardens with age and mileage, and once it fails oil weeps onto the clutch or torque converter, gradually dropping oil level and risking clutch slip on manual variants.

COMMON SYMPTOMS OF FAILURE

Oil spots under the vehicle near the bell housing
Slowly dropping oil level with no other visible leak
Clutch slipping or reduced bite in manual vehicles
Burning oil smell from the transmission area
Oil residue found on the flywheel during a clutch or transmission job

[1988 - 1990] LANCER CA,CB Sedan 1.5 (C62A) (FWD Petrol 1.5L 4cyl 56kW 4G15 (8V))
[1988 - 1989] LANCER CA,CB Sedan 1.5 (C62A) (FWD Petrol 1.5L 4cyl 61kW 4G15 (12V))
[1989] LANCER C6_A, C7_A, CA, CB Sedan 1.5 i (FWD Petrol 1.5L 4cyl 71kW)
[1989 - 1990] LANCER CA,CB Hatchback 1.5 (C62A) (FWD Petrol 1.5L 4cyl 61kW 4G15 (12V))
[1989 - 1990] LANCER CA,CB Hatchback 1.5 (C62A) (FWD Petrol 1.5L 4cyl 56kW 4G15 (8V))
[1990 - 1992] LANCER CA,CB Hatchback 1.5 (C62A) (FWD Petrol 1.5L 4cyl 62kW 4G15 (8V))
[1990 - 1992] LANCER CA,CB Hatchback 1.5 (C62A) (FWD Petrol 1.5L 4cyl 65kW 4G15 (12V))
[1990 - 1992] LANCER CA,CB Hatchback 1.5 i (C63A) (FWD Petrol 1.5L 4cyl 71kW 4G15 (12V))
[1990 - 1992] LANCER CA,CB Sedan 1.5 (C62A) (FWD Petrol 1.5L 4cyl 65kW 4G15 (12V))
[1990 - 1992] LANCER CA,CB Sedan 1.5 i (C62A) (FWD Petrol 1.5L 4cyl 71kW 4G15 (12V))
[1992 - 1996] LANCER CC Coupe 1.5 (CC2A) (FWD Petrol 1.5L 4cyl 65kW 4G15 (12V))
[1992 - 1996] LANCER CC2A Hatchback 1.5 (CC2A) (FWD Petrol 1.5L 4cyl 65kW 4G15 (12V))
[1992 - 1996] LANCER CD,CE Sedan 1.5 (CB2A) (FWD Petrol 1.5L 4cyl 65kW 4G15 (12V))
[1996 - 2004] LANCER CE Coupe 1.5 16V (CJ2) (FWD Petrol 1.5L 4cyl 63kW 4G15 (16V))
[1996 - 2003] LANCER CE Sedan 1.5 12V (CK2A) (FWD Petrol 1.5L 4cyl 69kW 4G15 (12V))

Identification
SKU	21443-22000-LANCER
Brand	OEM
Part Numbers
Part Number	21443-22000
Reference OEM Number	21443-22000
Other OEM Numbers	21443-22000 21443-22010 MD008885 MD016549 MD117643 MD372250
Related Part Numbers	97230
Trade Part Numbers	Elring: 034.530, Victor Reinz: 81-53306-00
Product Specifics
Product Type	Oil Seal
Rotation Direction	Anticlockwise
Compatible Makes	Mitsubishi
Fitment Type	Direct Replacement
Thickness	9mm
Inner Diameter	72mm
Outer Diameter	96mm
Material	Silicone Rubber (MVQ)
Other Details
Note	Always verify fitment using your vehicle's OEM part number.