




Crankshaft Sensor for Nissan 350Z Skyline Maxima Murano Stagea VQ35 VQ25 VQ30
Fits Nissan 350Z Skyline Maxima Murano Aftermarket
BRAND NEW OEM Quality CRANKSHAFT POSITION SENSOR TO SUIT NISSAN ( VQ25DD VQ25DE VQ25DET VQ30DD VQ35DE VQ35HR Engines)
Package Includes:
1* CRANKSHAFT POSITION SENSOR (3-PIN PLUG).
OEM# 23731-AL60C
- NISSAN VQ25 Engines
- [06/01 - 10/06] NISSAN SKYLINE V35 (JDM IMPORT) 2.5L V6 VQ25DD 158kW
- [10/01 - 09/07] NISSAN STAGEA M35 (JDM IMPORT) 2.5L V6 VQ25DD 158kW
- [07/02 - 07/10] NISSAN ELGRAND E51 (JDM IMPORT) 2.5L V6 VQ25DE 134kW
- [10/01 - 09/07] NISSAN STAGEA M35 (JDM IMPORT) 2.5L V6 VQ25DET
- NISSAN VQ30 Engines
- [06/01 - 10/06] NISSAN SKYLINE V35 (JDM IMPORT) 3.0L V6 VQ30DD
- [10/01 - 09/07] NISSAN STAGEA M35 (JDM IMPORT) 3.0L V6 VQ30DD
- NISSAN VQ35 Engines
- [07/02 - 12/06] NISSAN 350Z Z33 3.5L V6 VQ35DE
- [07/02 - 07/10] NISSAN ELGRAND E51 (JDM IMPORT) 3.5L V6 VQ35DE
- [12/03 - 12/05] NISSAN MAXIMA J31 3.5L V6 VQ35DE
- [01/06 - 05/09] NISSAN MAXIMA J31 3.5L V6 VQ35DE
- [06/09 - 09/14] NISSAN MAXIMA J32 3.5L V6 VQ35DE
- [01/05 - 12/08] NISSAN MURANO Z50 3.5L V6 VQ35DE
- [01/09 - 12/15] NISSAN MURANO Z51 3.5L V6 VQ35DE
- [06/01 - 10/06] NISSAN SKYLINE V35 (JDM IMPORT) 3.5L V6 VQ35DE
- [10/01 - 09/07] NISSAN STAGEA M35 (JDM IMPORT) 3.5L V6 VQ35DE
- [01/07 - 04/09] NISSAN 350Z Z33 3.5L V6 VQ35HR 230kW
How do I test a crankshaft or camshaft position sensor?
Use an OBD2 scanner to check for fault codes P0335 to P0338 (crankshaft) or P0340 to P0349 (camshaft). You can also test the sensor with a multimeter - inductive sensors should show resistance between 200 and 1,000 ohms, while Hall effect sensors require a live voltage test with the engine cranking. Erratic or absent RPM signal on a live data scanner is a strong indicator of sensor failure.
Can a cam or crank sensor fault cause my vehicle to go into limp mode?
Yes. A faulty crankshaft position sensor in particular can cause the ECU to lose engine speed and position data entirely, which may trigger limp mode or prevent the engine from starting. A faulty camshaft sensor on variable valve timing engines can cause the VVT system to default to a fixed position, significantly reducing power and fuel economy.
Do cam and crank sensors need to be programmed after replacement?
In most cases no - aftermarket OEM replacement sensors are direct plug-in replacements that require no programming. However some vehicles, particularly late model European makes including BMW and Mercedes-Benz, may require a crankshaft adaptation reset using a dealer-level scan tool after replacement. Check your vehicle service information before replacing the sensor.
What are the symptoms of a faulty crankshaft position sensor?
Symptoms include intermittent stalling, engine not starting, rough idle, misfires, and a Check Engine light with codes P0335-P0338. In severe cases the engine will crank but not start as the ECU cannot determine crank position for ignition timing.
What are the symptoms of a faulty camshaft position sensor?
Symptoms include poor performance, misfires, difficulty starting, rough idle, and fault codes P0340-P0343. Variable valve timing systems (VVT) will also be affected, causing sluggish response and increased fuel consumption.
Can I drive with a bad crankshaft position sensor?
If the sensor has failed completely the engine will not start or will stall and not restart. If it is intermittently failing, driving is dangerous - the engine can cut out without warning. Replace it immediately.
Do I need to replace both the cam and crank sensor at the same time?
Not necessarily - replace whichever has failed based on fault codes and diagnosis. However, if your vehicle has high kilometres and one has failed, it is worth considering replacing both as they are similar in age and condition.
| Identification | |
|---|---|
| SKU | CSCA263-23731AL60C |
| Barcode # | 4046001849978 |
| Brand | Aftermarket OEM Replacement |
| Part Numbers | |
| Part Number | CSCA263 |
| Reference OEM Number | 23731-AL60C |
| Other OEM Numbers | 23731-8J105, 23731-8J106, 23731-AL606 |
| Related Part Numbers | SC294, 235-1151 |
| Trade Part Numbers | 23731-AL60C, 23731-AL60D, 23731-AL60E, 23731-WL01A |
| Product Specifics | |
| Colour | Black |
| Product Type | SENSOR |
| Sensor Type | CRANKSHAFT POSITION SENSOR |
| Supplementary Article Info | without cable |
| Number of connectors | 3 -pin connector |
| Rated Voltage | 12 V |
| Height | 38 mm |
| Other Details | |
| Note | Always verify fitment using your vehicle's OEM part number. |
Be The First To Review This Product!
Help other SENSORGAL LTD. users shop smarter by writing reviews for products you have purchased.