Mass Airflow Sensor 4-Pin ZD30DDTi VQ35DE - Fits Nissan Patrol Skyline Elgrand

If your Nissan has been throwing a MAF-related fault code, running rough, or going into limp mode, this is the part you need. This aftermarket OEM replacement mass airflow sensor insert is a direct plug-and-play fit - no wiring modification, no coding, no drama. Packed and shipped from Cranbourne VIC so you can get back on the road fast.

To Suit

• This sensor suits the Nissan Patrol GR/GU/Y61 IV DTi 3.0L ZD30DDTi from May 2000 through August 2004 - one of the most common applications we see come through.
• It also covers a broad range of Nissan Skyline models including the V35, PV35, HV35, NV35 and CPV35 series with VQ30DD, VQ25DD and VQ35DE engines,
• as well as Nissan Elgrand E50 and E51 series, Maxima A33, Primera WP12, Pulsar N16, Stagea NM35 Turbo and X-Trail T30.
• Check the full fitment list below for your exact model and year.

Important Fitment Check

This is a 4-pin oval connector sensor insert supplied without housing - confirm your original unit uses an oval 4-pin plug before ordering. Nissan Pulsar N16 owners should verify the original part number matches 22680-AD210 and that your unit has the 4-pin connector, as some early N16 variants used a different sensor. Always compare your OEM part number against those listed below to confirm compatibility.

Replaces Part Numbers

• 22680-AD21A
• 22680-AD210
• 22680-AA301
• 22794-AA010

Other Part Numbers

• NTK-AU: AFT5-V010
• GOSS: AMAD210N
• BLUE PRINT: ADN174210
• VDO: A2C59506194

Package Includes

• 1 x Mass Airflow Sensor Insert (4-pin plug)

About This Part

The mass airflow sensor measures the volume and density of air entering the engine and sends that data to the ECU in real time. The ECU uses this signal to calculate the correct fuel delivery - so when the sensor fails, fuel consumption rises, power drops and fault codes appear. This sensor mounts at the air intake pipe with 2 bolts, runs on a 12V circuit and uses a 4-pin oval connector. It is supplied as an insert only without housing, so it fits directly into your existing airbox assembly.

Common Symptoms of Failure

• Check engine light or fault codes P0100 to P0104
• Engine hesitation or stumbling on acceleration
• Rough idle or engine surging
• Vehicle entering limp mode or reduced power
• Black smoke from exhaust on diesel variants (ZD30DDTi)
• Increased fuel consumption with no other explanation
• Engine stalling at low revs or when coming to a stop