BRAND NEW *OEM Quality* MAP sensor (manifold absolute pressure / air temperature) to suit Ford Falcon AU BA BF FG 4.0L 6cyl / Territory SX SY SZ / Fairlane Fairmont LTD 4.0L.

If your Falcon or Territory is idling roughly, stalling at lights, surging under load, or showing a P0106-P0109 fault code, the MAP sensor is one of the first things to check. This is the 4-pin oval connector non-turbo sensor that fits the entire 4.0L Barra family - dispatched same-day before 12pm from Cranbourne VIC.

TO SUIT

Designed for the Ford Falcon 4.0L 6cyl across AU Series 2/3 (Intech), BA (Barra 182), BF (Barra 190), and FG (Barra 195) in Sedan, Ute, Wagon, and Platform/Chassis body styles. Also covers petrol and LPG/EcoLPi variants. Also fits Ford Territory SX/SY/SZ 4.0L, Fairlane AU/BA/BF 4.0L, Fairmont AU/BA/BF 4.0L, and LTD AU 4.0L. Fits AU Series 2 and 3 only - does not fit AU Series 1.

FITMENT CHECK

Fits AU Series 2 and 3 only - does NOT fit AU Series 1. Some FG Falcon models use a different sensor - verify your OEM part number against the image before ordering. This sensor is for naturally aspirated and LPG engines only - does not fit XR6 Turbo.

OEM PART NUMBERS

XS6F9F479AB
XS6F-9F479-AB
XS6F9F479AA
XS6F-9F479-AA
1086439
1087424

OTHER PART NUMBERS

Bosch: 0261230027
Continental/VDO: A2C59515232
Pierburg: 7.18222.11.0
HELLA: 6PP 009 400-531
VEMO: V25-72-0064-1
Walker Products: 225-1067
NTK-AU: EPBMPT4-A036Z

PACKAGE INCLUDES

1 x BRAND NEW MAP / air temperature sensor (4-pin oval connector). 1-bar pressure range (10-118 kPa). Direct OEM replacement - plug-in fitment, no wiring modification required.

ABOUT THIS SENSOR

The MAP (manifold absolute pressure) sensor measures the air pressure inside the intake manifold and feeds this data to the ECU. Combined with the integrated air temperature sensor, the ECU uses this information to calculate the correct air-fuel mixture, ignition timing, and idle control.

On the 4.0L Barra and Intech engines this sensor is critical to idle quality and low-speed drivability. A failing sensor causes the ECU to calculate incorrect fuel delivery - leading to rich or lean running, rough idle, stalling, and reduced power across the rev range.

COMMON SYMPTOMS OF FAILURE

Check Engine light with codes P0106 P0107 P0108 P0109
Rough idle, surging, or stalling at lights
Poor throttle response or flat spots in acceleration
Engine running rich - high fuel consumption or black smoke
Hard starting or extended cranking
Hesitation under load at highway speeds

[03/99 - 12/02] FORD FALCON AU AUII AUIII 4.0L 6cyl Intech MPFI Sedan/ Ute/ Wagon (Series 2 and 3 only)
[03/99 - 12/02] FORD FALCON AU AUII AUIII 4.0L 6cyl Intech MPFI VCT Sedan
[03/99 - 12/02] FORD FALCON AU AUII AUIII 4.0L 6cyl LPG Sedan/ Ute
[09/02 - 05/05] FORD FALCON BA 4.0L 6cyl Barra 182 DOHC Sedan/ Ute/ Wagon
[09/02 - 05/05] FORD FALCON BA 4.0L 6cyl Barra 182 LPG Sedan/ Ute
[07/05 - 02/08] FORD FALCON BF 4.0L 6cyl Barra 190 DOHC Sedan/ Ute/ Wagon
[07/05 - 02/08] FORD FALCON BF 4.0L 6cyl Barra 190 LPG Sedan/ Ute
[05/08 - 10/14] FORD FALCON FG 4.0L 6cyl Barra 195 DOHC Sedan/ Ute/ Platform Chassis
[05/08 - 10/14] FORD FALCON FG 4.0L 6cyl EcoLPi LPG Sedan/ Ute
[10/14 ON] FORD FALCON FG X 4.0L 6cyl Sedan/ Ute/ Platform Chassis
[10/04 - 04/11] FORD TERRITORY SX/ SY 4.0L 6cyl SUV RWD/ AWD
[04/11 - 10/16] FORD TERRITORY SZ 4.0L 6cyl SUV RWD/ AWD
[03/99 - 12/02] FORD FAIRLANE AU 4.0L 6cyl MPFI Sedan
[09/02 - 09/05] FORD FAIRLANE BA 4.0L 6cyl Sedan
[10/05 - 12/07] FORD FAIRLANE BF 4.0L 6cyl Sedan
[03/99 - 12/02] FORD FAIRMONT AU AUII AUIII 4.0L 6cyl Sedan/ Wagon
[09/02 - 05/05] FORD FAIRMONT BA 4.0L 6cyl Sedan
[07/05 - 02/08] FORD FAIRMONT BF 4.0L 6cyl Sedan
[03/99 - 12/02] FORD LTD AU 4.0L 6cyl VCT Sedan

What fault codes does a faulty MAP sensor trigger?

A faulty MAP sensor typically triggers codes P0105 to P0109. P0105 indicates a circuit malfunction, P0106 indicates the signal is out of range, P0107 and P0108 indicate the signal is too low or too high respectively, and P0109 indicates an intermittent circuit fault. These codes combined with symptoms such as poor idle and black smoke are strong indicators of MAP sensor failure.

How do I test a MAP sensor?

With an OBD2 scanner in live data mode, the MAP sensor should read close to atmospheric pressure (around 101 kPa) with the engine off, and drop to 30 to 50 kPa at idle with the engine running due to manifold vacuum. Under wide open throttle the reading should rise back toward atmospheric. A sensor that reads flat or does not respond to throttle changes has failed. You can also test supply voltage and signal output with a multimeter.

Can I drive with a faulty MAP sensor?

You can drive short distances but engine performance will be noticeably degraded. The ECU uses the MAP sensor to calculate fuel delivery - a faulty sensor causes incorrect fuelling which leads to poor economy, rough running, and increased emissions. On turbocharged engines a faulty MAP sensor can also prevent boost control from operating correctly. Replace it as soon as possible to avoid further damage.

What does a MAP sensor do?

The Manifold Absolute Pressure (MAP) sensor measures intake manifold pressure to help the ECU calculate the correct fuel and ignition timing. It is critical for engine efficiency, particularly on turbocharged and supercharged vehicles.

What are the symptoms of a faulty MAP sensor?

Symptoms include poor acceleration, rough idle, excessive fuel consumption, black smoke, engine hesitation, and a Check Engine light with codes P0105-P0109. Turbocharged vehicles may also experience boost control issues.

What is the difference between a MAP sensor and a MAF sensor?

A MAF (Mass Air Flow) sensor directly measures the mass of air entering the engine. A MAP sensor measures manifold pressure and the ECU calculates air mass from that reading. Many vehicles use one or the other; some use both. They are not interchangeable.

Identification
SKU	CMS216
Brand	Aftermarket OEM Replacement
Part Numbers
Part Number	CMS216
Reference OEM Number	XS6F-9F479-AB
Other OEM Numbers	1086439, 1087424, XS6F9F479AA, XS6F9F479AB
Related Part Numbers	MP115, TMP008, MAP-012, 0261230028
Trade Part Numbers	Bosch: 0261230027, VEMO: V25-72-0064-1, NTK-AU: EPBMPT4-A036Z
Product Specifics
Product Type	SENSOR
Sensor Type	Manifold Absolute Pressure (MAP) Sensor
Number of pins	4-Pin
Connector Shape	oval
Pressure Range	10 kPa - 118 kPa
Number of mounting bores	1
Compatible Makes	Ford
Fitment Type	Direct Replacement
Other Details
Note	Fits AU Series 2 and 3 only. Does NOT fit AU Series 1.
Unit Of Measure	ea