Name: MAP Sensor 16212460 Holden Commodore VT VX VY VZ 5.7L LS1 GEN3 Monaro HSV
Brand: Aftermarket OEM Replacement
SKU: CMS210
Price: 78.97 AUD
Availability: InStock

BRAND NEW *OEM Quality* MAP Sensor (Manifold Absolute Pressure Sensor) to suit Holden Commodore VT VX VY VZ 5.7L LS1 Gen3 V8 - and the full range of Holden, HSV and Opel-platform vehicles sharing OEM 16212460.

Check engine light on, rough idle, poor throttle response or black smoke? A failed MAP sensor is one of the most common fault triggers on the LS1 and on the Opel-derived Z22SE / Z18XE engines used in the Astra, Vectra, Barina and Zafira. This is a direct-fit 3-pin oval connector replacement. Same-day dispatch before 12pm from Melbourne.

TO SUIT

This is a 1-bar MAP sensor suitable for LS1 Gen3 5.7L V8 and Opel-platform 4-cylinder engines.
It suits the Holden Commodore VT VX VY VZ 5.7L LS1, Calais VT VX VY VZ, Caprice WH WK WL 5.7L, Statesman VH VQ WH WK WL 5.7L, Monaro V2 VZ 5.7L, Crewman VY VZ 5.7L, One Tonner VY VZ 5.7L and Adventra VY VZ 5.7L.
Also suits HSV Clubsport VT VX VY VZ, GTS VT VX VY, Senator VT VX VY VZ, GTO V2 VX VZ, Maloo VU VY VZ, Grange VS WH WK WL, Avalanche VY VZ and Coupe 4 VZ - all LS1.
Also suits Holden Astra TS AH, Barina XC, Vectra JS ZC, Zafira TT, Combo XC, Colorado RC, Holden Rodeo TF RA, Frontera UES, Jackaroo UBS, Statesman VQ, Commodore VG VP, Daewoo Leganza and Nubira, and Elfin MS8.
Connector: 3-pin oval. Sensor type: 1-bar.

FITMENT CHECK

This is the standard 1-bar MAP sensor for naturally aspirated and mildly tuned LS1 engines. It does not suit the 6.0L L76 / L98 / LS2 / L77 Gen4 engines - for those see CMS210-2. It also does not suit the HSV W427 LS7 or HSV Grange WM LS3 - verify OEM number before ordering on these models.

OEM PART NUMBERS

16212460
19418807
12614970
16258659
28074365
1235046
1247047
6238120
6238159
98131025

OTHER PART NUMBERS

ACDelco: 12614970
Delphi: PS10002
Delphi: PS20091-12B1
Goss: MP141
HELLA: 6PP 009 400-011
NGK: 93871
NTK-AU: MA0090
PIERBURG: 7.18222.25.0
VEMO: V40-72-0398
WALKER PRODUCTS: 225-1024

PACKAGE INCLUDES

1 x MAP Sensor (3-pin oval connector)

ABOUT THIS SENSOR

The Manifold Absolute Pressure (MAP) sensor measures air pressure inside the intake manifold and sends this data to the ECU. The ECU uses it to calculate engine load and determine the correct fuel injection quantity and ignition timing. On LS1 Gen3 engines the sensor is located on the intake manifold and is a straightforward plug-and-play replacement.

When the MAP sensor fails or gives an incorrect reading the ECU miscalculates fuelling. The result is rough idle, hesitation, black smoke, poor fuel consumption or a P0106 / P0107 / P0108 fault code. On the Opel-platform engines (Z22SE / Z18XE) a failing MAP sensor is a very common cause of rough running and check engine lights.

COMMON SYMPTOMS OF FAILURE

Check engine light - fault codes P0106 / P0107 / P0108 (MAP Sensor Circuit)
Rough idle or engine hunting at low revs
Poor throttle response or hesitation under acceleration
Black smoke from exhaust under load
Increased fuel consumption
Engine stalling at idle

Note: This Is A 1-Bar Map Sensor, Standard Replacement.

Please check the (Image / OE Number) with your Original Part

Suit For Holden V8 GEN IV LS2 6.0L Motor Up to VIN# 8L100907

Not Suit For Holden V8 GEN IV LS2 6.0L Motor IN Vehicles From VIN# 8L100908 (MY08.5)

[06/99 - 08/00] HOLDEN COMMODORE VT i V8 (5.7L V8 LS1 220kW)
[09/00 - 09/02] HOLDEN COMMODORE VX i V8 (5.7L V8 LS1 225kW)
[12/00 - 09/02] HOLDEN COMMODORE VU i V8 (5.7L V8 LS1 225kW)
[09/02 - 08/04] HOLDEN COMMODORE VY i V8 (5.7L V8 LS1 225kW / 235kW / 245kW)
[09/04 - 02/06] HOLDEN COMMODORE VZ i V8 (5.7L V8 LS1 235kW / 250kW)
[06/99 - 10/00] HOLDEN CALAIS VT i V8 (5.7L V8 LS1 220kW)
[09/00 - 09/02] HOLDEN CALAIS VX i V8 (5.7L V8 LS1 225kW)
[08/03 - 08/04] HOLDEN CALAIS VY i V8 (5.7L V8 LS1 235kW)
[08/04 - 01/06] HOLDEN CALAIS VZ i V8 (5.7L V8 LS1 235kW)
[06/99 - 10/00] HOLDEN CAPRICE WH i V8 (5.7L V8 LS1 220kW)
[10/00 - 04/03] HOLDEN CAPRICE WH i V8 (5.7L V8 LS1 225kW)
[05/03 - 07/04] HOLDEN CAPRICE WK i V8 (5.7L V8 LS1 245kW)
[08/04 - 01/06] HOLDEN CAPRICE WL i V8 (5.7L V8 LS1 250kW)
[04/90 - 02/94] HOLDEN STATESMAN VQ i V8 (5.0L V8 GMH 304 165kW)
[06/99 - 11/02] HOLDEN STATESMAN WH i V8 (5.7L V8 LS1 220kW)
[11/02 - 04/03] HOLDEN STATESMAN WH i V8 (5.7L V8 LS1 225kW)
[05/03 - 07/04] HOLDEN STATESMAN WK i V8 (5.7L V8 LS1 235kW / 245kW)
[08/04 - 07/06] HOLDEN STATESMAN WL i V8 (5.7L V8 LS1 250kW)
[12/01 - 01/03] HOLDEN MONARO V2 i V8 (5.7L V8 LS1 225kW)
[01/03 - 08/03] HOLDEN MONARO V2 i V8 (5.7L V8 LS1 235kW)
[08/03 - 09/04] HOLDEN MONARO V2 i V8 (5.7L V8 LS1 245kW)
[09/04 - 07/06] HOLDEN MONARO VZ i V8 (5.7L V8 LS1 260kW)
[09/03 - 07/04] HOLDEN CREWMAN VY i V8 (5.7L V8 LS1 225kW)
[08/04 - 02/06] HOLDEN CREWMAN VZ i V8 (5.7L V8 LS1 235kW)
[08/03 - 07/04] HOLDEN ONE TONNER VY i V8 (5.7L V8 LS1 235kW)
[11/04 - 12/05] HOLDEN ONE TONNER VZ i V8 (5.7L V8 LS1 235kW / 260kW)
[08/03 - 10/04] HOLDEN ADVENTRA VY i V8 CX8/LX8 (5.7L V8 LS1 235kW)
[10/04 - 12/07] HOLDEN ADVENTRA VZ i V8 (5.7L V8 LS1 235kW / 250kW)
[09/91 - 07/93] HOLDEN COMMODORE VP i V8 (5.0L V8 GMH 304 165kW)
[01/88 - 09/91] HOLDEN COMMODORE VG i V6 (3.8L V6 LG2 125kW)
[07/99 - 10/00] HSV CLUBSPORT VT i V8 (5.7L V8 LS1 250kW)
[09/00 - 09/02] HSV CLUBSPORT VX i V8 (5.7L V8 LS1 255kW)
[10/02 - 09/04] HSV CLUBSPORT VY i V8 (5.7L V8 LS1 260kW / 285kW)
[09/97 - 06/99] HSV GTS VT i V8 (5.7L V8 HSVV8 220kW)
[04/00 - 09/00] HSV GTS VT i V8 (5.7L V8 LS1 300kW)
[09/00 - 08/01] HSV GTS VX i V8 (5.7L V8 LS1 300kW)
[10/02 - 09/04] HSV GTS VY i V8 (5.7L V8 LS1 300kW)
[09/97 - 08/00] HSV SENATOR VT i V8 (5.7L V8 LS1 250kW / HSVV8 220kW / 230kW)
[09/00 - 09/02] HSV SENATOR VX i V8 (5.7L V8 LS1 255kW / 300kW)
[10/02 - 09/04] HSV SENATOR VY i V8 (5.7L V8 LS1 260kW / 285kW)
[03/01 - 08/03] HSV GTO V2 i V8 (5.7L V8 LS1 255kW)
[09/03 - 09/04] HSV GTO VX/VZ i V8 (5.7L V8 LS1 285kW)
[03/01 - 09/04] HSV GTS V2 i V8 (5.7L V8 LS1 300kW)
[03/01 - 09/02] HSV MALOO VU i V8 (5.7L V8 LS1 255kW)
[10/02 - 09/04] HSV MALOO VY i V8 (5.7L V8 LS1 260kW / 285kW)
[07/99 - 11/00] HSV GRANGE WH i V8 (5.7L V8 LS1 250kW)
[07/99 - 09/00] HSV GRANGE WH i V6 Supercharged (3.8L V6 L67 180kW)
[10/00 - 09/03] HSV GRANGE WH i V8 (5.7L V8 LS1 255kW)
[10/03 - 09/04] HSV GRANGE WK i V8 (5.7L V8 LS1 285kW)
[03/04 - 09/04] HSV AVALANCHE VY i V8 (5.7L V8 LS1 260kW)
[10/03 - 04/06] HSV AVALANCHE VY i V8 (5.7L V8 LS1 260kW)
[01/04 - 01/06] HSV AVALANCHE VZ (5.7L V8 LS1 270kW)
[07/04 - 04/06] HSV COUPE 4 VZ i V8 (5.7L V8 LS1 270kW)
[10/96 - 08/99] HSV GRANGE VS (5.0L V8 VU 185kW / 195kW)
[09/97 - 06/99] HSV SV300 VX / SENATOR VT i V8 variants
[09/00 - 10/05] HOLDEN ASTRA TS i (1.8L 4cyl Z18XE 90kW)
[09/00 - 07/04] HOLDEN ASTRA TS i (2.2L 4cyl Z22SE 108kW)
[06/02 - 12/06] HOLDEN ASTRA TS i (2.2L 4cyl Z22SE 108kW)
[12/06 - 03/10] HOLDEN ASTRA AH / AH i (2.2L 4cyl Z22YH 110kW)
[09/00 - 12/05] HOLDEN BARINA XC Sfi (1.4L 4cyl Z14XE / X14XE 66kW)
[01/04 - 02/05] HOLDEN BARINA XC Efi (1.4L 4cyl Z14XEP 66kW)
[09/00 - 02/05] HOLDEN BARINA XC SRi (1.8L 4cyl Z18XE 92kW)
[08/98 - 03/03] HOLDEN VECTRA JS i (2.2L 4cyl C22SEL 104kW)
[04/02 - 12/06] HOLDEN VECTRA ZC i (2.2L 4cyl Z22SE 108kW)
[06/01 - 02/06] HOLDEN ZAFIRA TT i (2.2L 4cyl Z22SE 108kW)
[09/02 - 04/05] HOLDEN COMBO XC i (1.6L 4cyl Z16SE 62kW)
[04/05 - 12/12] HOLDEN COMBO XC i (1.4L 4cyl Z14XEP 66kW)
[07/08 - 12/12] HOLDEN COLORADO RC (2.4L 4cyl Y24SE 92kW)
[06/98 - 02/03] HOLDEN RODEO TFR30 i (2.2L 4cyl C22NE 87kW)
[02/98 - 02/03] HOLDEN RODEO TFR25 / TFS25 i (3.2L V6 6VD1 140kW)
[02/03 - 12/05] HOLDEN RODEO TFR26 / TFS26 i (3.5L V6 6VE1 147kW)
[02/03 - 07/08] HOLDEN RODEO TFR32 / RA i (2.4L 4cyl Y24SE / C24SE 94kW)
[02/99 - 07/02] HOLDEN FRONTERA UES30 i (2.2L 4cyl X22SE 96kW)
[02/99 - 04/04] HOLDEN FRONTERA UES25 i (3.2L V6 6VD1 151kW)
[04/92 - 02/98] HOLDEN JACKAROO / MONTEREY UBS25 i (3.2L V6 6VD1 130kW)
[03/98 - 09/04] HOLDEN JACKAROO / MONTEREY UBS26 RS (3.5L V6 6VE1 158kW)
[03/98 - 09/04] HOLDEN JACKAROO / MONTEREY UBS73 TD (3.0L 4cyl 4JX1-T 117kW)
[07/97 - 04/99] DAEWOO LEGANZA KLAV 16V (2.0L 4cyl X20SED 98kW)
[04/99 - 01/04] DAEWOO LEGANZA KLAV 16V (2.2L 4cyl T22SED 100kW)
[05/98 - 05/99] DAEWOO NUBIRA J100 16V (2.0L 4cyl X20SED 98kW)
[01/05 - 12/10] ELFIN MS8 CLUBMAN / STREAMLINER i V8 (5.7L V8 LS1 245kW)
[09/06 - 12/09] HUMMER H3 (3.7L 5cyl LLR 180kW)

What fault codes does a faulty MAP sensor trigger?

A faulty MAP sensor typically triggers codes P0105 to P0109. P0105 indicates a circuit malfunction, P0106 indicates the signal is out of range, P0107 and P0108 indicate the signal is too low or too high respectively, and P0109 indicates an intermittent circuit fault. These codes combined with symptoms such as poor idle and black smoke are strong indicators of MAP sensor failure.

How do I test a MAP sensor?

With an OBD2 scanner in live data mode, the MAP sensor should read close to atmospheric pressure (around 101 kPa) with the engine off, and drop to 30 to 50 kPa at idle with the engine running due to manifold vacuum. Under wide open throttle the reading should rise back toward atmospheric. A sensor that reads flat or does not respond to throttle changes has failed. You can also test supply voltage and signal output with a multimeter.

Can I drive with a faulty MAP sensor?

You can drive short distances but engine performance will be noticeably degraded. The ECU uses the MAP sensor to calculate fuel delivery - a faulty sensor causes incorrect fuelling which leads to poor economy, rough running, and increased emissions. On turbocharged engines a faulty MAP sensor can also prevent boost control from operating correctly. Replace it as soon as possible to avoid further damage.

What does a MAP sensor do?

The Manifold Absolute Pressure (MAP) sensor measures intake manifold pressure to help the ECU calculate the correct fuel and ignition timing. It is critical for engine efficiency, particularly on turbocharged and supercharged vehicles.

What are the symptoms of a faulty MAP sensor?

Symptoms include poor acceleration, rough idle, excessive fuel consumption, black smoke, engine hesitation, and a Check Engine light with codes P0105-P0109. Turbocharged vehicles may also experience boost control issues.

What is the difference between a MAP sensor and a MAF sensor?

A MAF (Mass Air Flow) sensor directly measures the mass of air entering the engine. A MAP sensor measures manifold pressure and the ECU calculates air mass from that reading. Many vehicles use one or the other; some use both. They are not interchangeable.

Identification
SKU	CMS210
Brand	Aftermarket OEM Replacement
Part Numbers
Part Number	CMS210
Reference OEM Number	16212460
Other OEM Numbers	16212460, 19418807, 12614970, 16258659, 28074365
Related Part Numbers	CMS210, MAP-005, MP141, TMP003, MA0090, AS60
Trade Part Numbers	ACDelco: 12614970, DELPHI: PS10002, NTK-AU: MA0090
Product Specifics
Product Type	SENSOR
Sensor Type	Manifold Absolute Pressure (MAP) Sensor
Features	Direct Fit
Manufacturer Warranty	1 Year
Compatible Vehicles	COMMODORE V8 GEN 3 LS1 5.7L [VU VX VY VZ]
Number of pins	3 -pin connector
Connector Shape	oval
Supplementary Article Info	without integrated air temperature sensor
Pressure Range	20 kPa, until 100 kPa
Number of mounting bores	1
Other Details
Note	1-Bar Map Sensor
Unit Of Measure	ea