Crankshaft Sensor 12585546 for Holden VZ VE VF Commodore 6.0L 6.2L V8 L76 L98 Crankshaft Sensor 12585546 for Holden VZ VE VF Commodore 6.0L 6.2L V8 L76 L98Crankshaft Sensor 12585546 for Holden VZ VE VF Commodore 6.0L 6.2L V8 L76 L98Crankshaft Sensor 12585546 for Holden VZ VE VF Commodore 6.0L 6.2L V8 L76 L98Crankshaft Sensor 12585546 for Holden VZ VE VF Commodore 6.0L 6.2L V8 L76 L98Crankshaft Sensor 12585546 for Holden VZ VE VF Commodore 6.0L 6.2L V8 L76 L98Crankshaft Sensor 12585546 for Holden VZ VE VF Commodore 6.0L 6.2L V8 L76 L98Crankshaft Sensor 12585546 for Holden VZ VE VF Commodore 6.0L 6.2L V8 L76 L98Crankshaft Sensor 12585546 for Holden VZ VE VF Commodore 6.0L 6.2L V8 L76 L98Crankshaft Sensor 12585546 for Holden VZ VE VF Commodore 6.0L 6.2L V8 L76 L98

Crankshaft Sensor 12585546 for Holden VZ VE VF Commodore 6.0L 6.2L V8 L76 L98

Part #: 12585546 OEM #: 12585546 SKU: CSCA353

Crankshaft Sensor for Holden V8 L76 L98 LS3 Engine

$102.97
RRP $149.00
SAVE $46.03 (31%)
In Stock

BRAND NEW OEM Quality CRANKSHAFT POSITION SENSOR TO SUIT HOLDEN / ISUZU / GMC

 

TO SUIT:

HOLDEN GEN4 (LS2 / L76 / L98 / L77) 6.0L & GEN4 (LS3 / LSA) 6.2L V8 MOTOR

  • [2006-2017] HOLDEN COMMODORE VZ VE VF
  • [2006-2017] HOLDEN STATESMAN / CAPRICE WL WM WN
  • INCLUDING BERLINA CALAIS CREWMAN CLUBSPORT GTS SENATOR MALOO

 

OEM#

12585546, 12703627, 213-3520

 

PACKAGE INCLUDES:

1 X *OEM QUALITY CRANKSHAFT POSITION SENSOR (3-PIN PLUG)

The crankshaft position sensor is an engine management component found on virtually all modern vehicles with internal combustion engines. It monitors the position and rotational speed of the crankshaft and sends the information to the engine control unit so it can make appropriate adjustments based on operating conditions. The crankshaft speed and position are some of the most important parameters used in engine management calculations, and many engines cannot run if the crankshaft position sensor is not providing an accurate signal.

Faulty crankshaft position sensor symptoms:

  • Issues Starting the Vehicle
  • Intermittent Stalling
  • Check Engine Light Comes On
  • Uneven Acceleration
  • Engine Misfires or Vibrates
  • Rough Idle and/or Vibrating Engine
  • Reduced Gas Mileage

HOLDEN COMMODORE

  • Holden Commodore (VZ): 6.0L V8 L76 (2006 Only) - Found in SS Thunder Ute, late SS Sedans.
  • Holden Commodore (VE Series 1 & 2): 6.0L V8 (L98, L76, L77) (2006 - 2013)
  • Holden Commodore (VF Series 1 & 2): 6.0L L77 & 6.2L LS3 (2013 - 2017)

 

HOLDEN STATESMAN / CAPRICE

  • Holden Statesman (WL): 6.0L V8 L76 (2006 Only)
  • Holden Statesman / Caprice (WM / WN): 6.0L & 6.2L V8 (2006 - 2017)

 

HSV (HOLDEN SPECIAL VEHICLES)

  • HSV E-Series (VE): 6.0L LS2 & 6.2L LS3 (2006 - 2013)
  • HSV Gen-F (VF): 6.2L LS3 & LSA (2013 - 2017)

 

⚠️ IMPORTANT VZ FITMENT NOTE

This sensor fits VZ 6.0L (L76/L98) Engines ONLY.

  • It has a GREY connector (58x Reluctor).
  • It does NOT fit VZ 5.7L LS1 engines (Black Plug).
  • It does NOT fit most VZ HSV LS2 engines (Black Plug).

Please check your existing sensor connector color before purchasing.

How do I test a crankshaft or camshaft position sensor?

Use an OBD2 scanner to check for fault codes P0335 to P0338 (crankshaft) or P0340 to P0349 (camshaft). You can also test the sensor with a multimeter - inductive sensors should show resistance between 200 and 1,000 ohms, while Hall effect sensors require a live voltage test with the engine cranking. Erratic or absent RPM signal on a live data scanner is a strong indicator of sensor failure.

Can a cam or crank sensor fault cause my vehicle to go into limp mode?

Yes. A faulty crankshaft position sensor in particular can cause the ECU to lose engine speed and position data entirely, which may trigger limp mode or prevent the engine from starting. A faulty camshaft sensor on variable valve timing engines can cause the VVT system to default to a fixed position, significantly reducing power and fuel economy.

Do cam and crank sensors need to be programmed after replacement?

In most cases no - aftermarket OEM replacement sensors are direct plug-in replacements that require no programming. However some vehicles, particularly late model European makes including BMW and Mercedes-Benz, may require a crankshaft adaptation reset using a dealer-level scan tool after replacement. Check your vehicle service information before replacing the sensor.

What are the symptoms of a faulty crankshaft position sensor?

Symptoms include intermittent stalling, engine not starting, rough idle, misfires, and a Check Engine light with codes P0335-P0338. In severe cases the engine will crank but not start as the ECU cannot determine crank position for ignition timing.

What are the symptoms of a faulty camshaft position sensor?

Symptoms include poor performance, misfires, difficulty starting, rough idle, and fault codes P0340-P0343. Variable valve timing systems (VVT) will also be affected, causing sluggish response and increased fuel consumption.

Can I drive with a bad crankshaft position sensor?

If the sensor has failed completely the engine will not start or will stall and not restart. If it is intermittently failing, driving is dangerous - the engine can cut out without warning. Replace it immediately.

Do I need to replace both the cam and crank sensor at the same time?

Not necessarily - replace whichever has failed based on fault codes and diagnosis. However, if your vehicle has high kilometres and one has failed, it is worth considering replacing both as they are similar in age and condition.

Identification
SKUCSCA353
Barcode #9341554004351
BrandAftermarket OEM Replacement
Part Numbers
Part Number12585546
Reference OEM Number12585546
Other OEM Numbers12585546, 12703627, 213-3520
Related Part NumbersCSCA353, CAS-159, EH0403, SC223, TCAS186
Trade Part NumbersACDelco: 213-3520, VEMO: V51-72-0173
Product Specifics
Sensor TypeCRANKSHAFT POSITION SENSOR
TypeSensor
FeaturesDirect Fit
Manufacturer Warranty1 Year
Ean9341554004351
Number of pins3 -pin connector
Supplementary Article Infowithout cable
Rated Voltage12 V
Housing ColourGrey
Other Details
NoteAlways verify fitment using your vehicle's OEM part number.
Unit Of Measureea

Be The First To Review This Product!

Help other SENSORGAL LTD. users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category