Crankshaft Position Sensor for Hyundai Sonata i45 ix35 Santa Fe Kia 39180-25300 Crankshaft Position Sensor for Hyundai Sonata i45 ix35 Santa Fe Kia 39180-25300Crankshaft Position Sensor for Hyundai Sonata i45 ix35 Santa Fe Kia 39180-25300Crankshaft Position Sensor for Hyundai Sonata i45 ix35 Santa Fe Kia 39180-25300Crankshaft Position Sensor for Hyundai Sonata i45 ix35 Santa Fe Kia 39180-25300Crankshaft Position Sensor for Hyundai Sonata i45 ix35 Santa Fe Kia 39180-25300Crankshaft Position Sensor for Hyundai Sonata i45 ix35 Santa Fe Kia 39180-25300Crankshaft Position Sensor for Hyundai Sonata i45 ix35 Santa Fe Kia 39180-25300Crankshaft Position Sensor for Hyundai Sonata i45 ix35 Santa Fe Kia 39180-25300Crankshaft Position Sensor for Hyundai Sonata i45 ix35 Santa Fe Kia 39180-25300

Crankshaft Position Sensor for Hyundai Sonata i45 ix35 Santa Fe Kia 39180-25300

Part #: 3918025300 OEM #: 39180-25300 SKU: 3918025300-SC090GEN

Direct Fit Replaces 39180-25300

$88.97
RRP $127.36
SAVE $38.39 (30%)
In Stock

BRAND NEW *OEM Quality* crankshaft position sensor for Hyundai Sonata i45 ix35 Santa Fe and Kia Cerato Sportage Sorento models.

A failing crankshaft sensor causes hard starting, stalling and check engine lights - this rear-mounted sensor restores accurate crank position signal to the ECU. Same-day dispatch before 12pm from Cranbourne VIC.

TO SUIT

  • Hyundai Sonata NF, i45 YF (2005-2014)
  • Hyundai ix35 LM, Santa Fe DM/DMA/TM (2010-2021)
  • Kia Cerato TD, Cerato Koup TD (2009-2013)
  • Kia Magentis MG, Optima TF/JF (2006-2021)
  • Kia Rondo UN, Sorento XM, Sportage SL (2008-2015)

FITMENT CHECK

This sensor suits both 39180-25300 and 39180-25200 applications - confirm your OEM number before ordering as Hyundai and Kia used slightly different revisions across this range.

OEM PART NUMBERS

  • 39180-25300
  • 3918025300
  • 39180-25200
  • 3918025200

OTHER PART NUMBERS

  • VEMO: V52-72-0154
  • NTK-AU: EH0400
  • HELLA: 6PU 009 168-991

PACKAGE INCLUDES

1x OEM crankshaft position sensor (3-pin connector, rear-mount, with seal ring and cable).

ABOUT THIS SENSOR

The crankshaft position sensor monitors crank speed and position on the Hyundai/Kia G4K engine family, feeding timing data to the ECU for fuel injection and ignition control. A degraded rear-mounted sensor on these Sonata, ix35, Santa Fe and Sportage models typically shows up first as an intermittent no-start or a rough idle at operating temperature.

Left unaddressed, a failing sensor can trigger limp-home mode or a complete no-start once the signal drops out entirely - replacing it restores reliable starting and smooth idle across the G4K 2.0L and 2.4L engine range.

COMMON SYMPTOMS OF FAILURE

  • Difficulty starting or intermittent no-start
  • Engine stalling while idling or driving
  • Check engine light with fault code P0335 or P0336
  • Rough or fluctuating idle
  • Hesitation or misfire under acceleration
  • Reduced fuel economy
  • [2011 - 2014] HYUNDAI I45 YF VI SEDAN 2.0L 4cyl G4KD (121kW)
  • [2011 - 2014] HYUNDAI I45 YF VI SEDAN 2.4L 4cyl G4KJ (142kW)
  •  
  • [2010 - 2015] HYUNDAI IX35 EL/ELH/LM SUV 2.0L 4cyl G4KD FWD (122kW)
  • [2010 - 2015] HYUNDAI IX35 EL/ELH/LM SUV 2.4L 4cyl G4KE AWD (130kW)
  • [2013 - 2015] HYUNDAI IX35 EL/ELH/LM SUV GDI 2.4L 4cyl G4KJ AWD (136kW)
  •  
  • [2012 - 2018] HYUNDAI SANTA FE DM/DMA III SUV 2.4L 4cyl G4KJ AWD (141kW)
  • [2015 - 2017] HYUNDAI SANTA FE DM/DMA III SUV GDI 2.4L 4cyl G4KJ AWD (138kW)
  • [2018 - 2021] HYUNDAI SANTA FE TM/TMA IV SUV GDI 2.4L 4cyl G4KJ AWD (138kW)
  •  
  • [2005 - 2008] HYUNDAI SONATA NF V SEDAN 2.4L 4cyl G4KC (119kW)
  • [2008 - 2010] HYUNDAI SONATA NF V SEDAN 2.4L 4cyl G4KC (128kW)
  •  
  • [2009 - 2013] KIA CERATO TD II HATCHBACK 2.0L 4cyl G4KD (115kW)
  • [2009 - 2013] KIA CERATO TD II SEDAN 2.0L 4cyl G4KD (115kW)
  • [2009 - 2013] KIA CERATO KOUP TD II COUPE CVVT 2.0L 4cyl G4KD (115kW)
  •  
  • [2006 - 2009] KIA MAGENTIS MG II SEDAN 2.4L 4cyl G4KC (119kW)
  • [2006 - 2008] KIA MAGENTIS MG II SEDAN 2.7L V6 G6EA (138kW)
  •  
  • [2011 - 2015] KIA OPTIMA FSGDS6B/TF SEDAN 2.4L 4cyl G4KJ (149kW)
  • [2015 - 2021] KIA OPTIMA JF SEDAN GDI 2.4L 4cyl G4KJ (138kW)
  •  
  • [2008 - 2013] KIA RONDO UN III MPV CVVT 2.0L 4cyl G4KA (106kW)
  •  
  • [2009 - 2015] KIA SORENTO XM II SUV CVVT 2.4L 4cyl G4KE (128kW)
  • [2012 - 2015] KIA SORENTO XM II SUV GDI 4WD 2.4L 4cyl G4KJ (141kW)
  •  
  • [2010 - 2015] KIA SPORTAGE SL III SUV CVVT 2.0L 4cyl G4KD (120kW)
  • [2010 - 2015] KIA SPORTAGE SL III SUV CVVT AWD 2.0L 4cyl G4KD (120kW)
  • [2010 - 2015] KIA SPORTAGE SL III SUV AWD 2.4L 4cyl G4KE (130kW)
How do I test a crankshaft or camshaft position sensor?

Use an OBD2 scanner to check for fault codes P0335 to P0338 (crankshaft) or P0340 to P0349 (camshaft). You can also test the sensor with a multimeter - inductive sensors should show resistance between 200 and 1,000 ohms, while Hall effect sensors require a live voltage test with the engine cranking. Erratic or absent RPM signal on a live data scanner is a strong indicator of sensor failure.

Can a cam or crank sensor fault cause my vehicle to go into limp mode?

Yes. A faulty crankshaft position sensor in particular can cause the ECU to lose engine speed and position data entirely, which may trigger limp mode or prevent the engine from starting. A faulty camshaft sensor on variable valve timing engines can cause the VVT system to default to a fixed position, significantly reducing power and fuel economy.

Do cam and crank sensors need to be programmed after replacement?

In most cases no - aftermarket OEM replacement sensors are direct plug-in replacements that require no programming. However some vehicles, particularly late model European makes including BMW and Mercedes-Benz, may require a crankshaft adaptation reset using a dealer-level scan tool after replacement. Check your vehicle service information before replacing the sensor.

What are the symptoms of a faulty crankshaft position sensor?

Symptoms include intermittent stalling, engine not starting, rough idle, misfires, and a Check Engine light with codes P0335-P0338. In severe cases the engine will crank but not start as the ECU cannot determine crank position for ignition timing.

What are the symptoms of a faulty camshaft position sensor?

Symptoms include poor performance, misfires, difficulty starting, rough idle, and fault codes P0340-P0343. Variable valve timing systems (VVT) will also be affected, causing sluggish response and increased fuel consumption.

Can I drive with a bad crankshaft position sensor?

If the sensor has failed completely the engine will not start or will stall and not restart. If it is intermittently failing, driving is dangerous - the engine can cut out without warning. Replace it immediately.

Do I need to replace both the cam and crank sensor at the same time?

Not necessarily - replace whichever has failed based on fault codes and diagnosis. However, if your vehicle has high kilometres and one has failed, it is worth considering replacing both as they are similar in age and condition.

Identification
SKU3918025300-SC090GEN
BrandAftermarket OEM Replacement
Part Numbers
Part Number3918025300
Reference OEM Number39180-25300
Other OEM Numbers39180-25300, 3918025300, 39180-25200, 3918025200
Related Part NumbersSC090, CSCA360G, CAS1799, EH0400, SS11329
Trade Part NumbersVEMO: V52-72-0154, NTK-AU: EH0400, HELLA: 6PU 009 168-991
Product Specifics
Product TypeSENSOR
Sensor TypeCAMSHAFT / CRANKSHAFT POSITION SENSOR
Fitting PositionRear
Number of pins3-Pin
Connector Shaperectangular
Supplementary Article InfoWith seal ring, with cable
Fitting Depth39 mm
Rated Voltage12V
Housing ColourBlack
Cable Length285 mm
Fitment TypeDirect Replacement
Other Details
NoteAlways verify fitment using your vehicle's OEM part number.

Be The First To Review This Product!

Help other SENSORGAL LTD. users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category