BRAND NEW genuine throttle position sensor to suit Hyundai and Kia 1.3L to 2.0L petrol engines from 2000 to 2013.

A failing TPS brings rough idle, hesitation on acceleration and an engine light that keeps returning. A correctly matched sensor built to factory specification gives a lasting fix, dispatched same-day from Cranbourne VIC.

TO SUIT

Hyundai Accent LC 2000-2006 - 1.5L G4EC / 1.6L G4ED
Hyundai Elantra XD 2000-2006 - 1.8L G4GB / 2.0L G4GC
Hyundai Elantra Lavita FC 2001-2004 - 1.8L G4GB
Hyundai Getz TB 2003-2011 - 1.3L G4EA / 1.6L G4ED
Hyundai Tiburon GK 2002-2004 - 2.0L G4GC
Hyundai Tucson JM 2004-2010 - 2.0L G4GC
Kia Cerato LD 2004-2009 - 2.0L G4GC
Kia Cerato TD 2009-2013 - 2.0L G4KD
Kia Cerato Koup TD 2009-2013 - 2.0L G4KD
Kia Sportage KM 2007-2010 - 2.0L G4GC

FITMENT CHECK

Verify your existing sensor matches OE 35170-22600 or 35170-23500 before purchase. If your vehicle is not listed above cross-check your OE number - this sensor suits any vehicle fitted with these Hyundai part numbers.

OEM PART NUMBERS

35170-22600
3517022600
35170-23500
3517023500

OTHER PART NUMBERS

BOSCH: 0280122014
DELPHI: SS10563-12B1
VEMO: V40-72-0384
PIERBURG: 4.02003.53.0
WALKER PRODUCTS: 200-1322

PACKAGE INCLUDES

1 x throttle position sensor with 3-pin rectangular connector, supplied without cable.

ABOUT THIS SENSOR

The throttle position sensor monitors the angle of the throttle plate and sends a continuous signal to the ECU to set fuel delivery and ignition timing.

Built to factory specification with anticlockwise rotation, 3-pin rectangular connector and 2 mounting bores - a direct physical match for the original throttle body with no wiring modification required.

COMMON SYMPTOMS OF FAILURE

Rough or unstable idle
Hesitation or stumble during acceleration
Poor fuel economy
Sudden loss of power or limp mode
Erratic or unresponsive throttle
Fault codes P0121 P0122 P0123

[01/00 - 12/03] HYUNDAI ACCENT LC 1.5L 4cyl G4EC 76kW
[01/03 - 12/06] HYUNDAI ACCENT LC 1.6L 4cyl G4ED 78kW
[01/00 - 12/06] HYUNDAI ELANTRA XD 1.8L 4cyl G4GB 97kW
[01/00 - 12/06] HYUNDAI ELANTRA XD 2.0L 4cyl G4GC 105kW
[01/01 - 12/04] HYUNDAI ELANTRA LAVITA FC 1.8L 4cyl G4GB 90kW
[01/03 - 12/11] HYUNDAI GETZ TB 1.3L 4cyl G4EA 60kW
[01/03 - 12/11] HYUNDAI GETZ TB 1.6L 4cyl G4ED 78kW
[01/02 - 12/04] HYUNDAI TIBURON GK 2.0L 4cyl G4GC 102kW
[01/04 - 12/10] HYUNDAI TUCSON JM 2.0L 4cyl G4GC 104kW
[01/04 - 12/09] KIA CERATO LD 2.0L 4cyl G4GC 105kW
[01/09 - 12/13] KIA CERATO TD 2.0L 4cyl G4KD 115kW
[01/09 - 12/13] KIA CERATO KOUP TD 2.0L 4cyl G4KD 115kW
[01/07 - 12/10] KIA SPORTAGE KM 2.0L 4cyl G4GC 105kW

What fault codes does a faulty TPS trigger?

A faulty throttle position sensor typically triggers codes P0120 to P0124. P0120 and P0121 indicate the TPS signal is out of range, P0122 and P0123 indicate the signal is too low or too high, and P0124 indicates an intermittent signal. On drive-by-wire vehicles additional codes related to the electronic throttle control system may also be present.

Can a faulty TPS cause my automatic transmission to shift incorrectly?

Yes. The ECU shares throttle position data with the transmission control module to determine when to upshift and downshift. A faulty TPS sending incorrect throttle angle data can cause erratic shift points, harsh gear changes, the transmission hunting between gears, or the vehicle remaining in a fixed gear. Replacing the TPS often resolves transmission behaviour issues that appear unrelated.

Is it safe to drive with a faulty throttle position sensor?

It depends on how severely the sensor has failed. A partially failed TPS may cause hesitation and poor throttle response but the vehicle remains driveable. A fully failed TPS on a drive-by-wire vehicle can trigger limp mode, restricting the engine to a fixed low throttle position to prevent runaway acceleration. In either case replace the sensor as soon as possible as the fault can worsen without warning.

What are the symptoms of a faulty throttle position sensor?

Symptoms include jerky or hesitant acceleration, rough idle, unexpected surging, poor throttle response, stalling, and fault codes P0120-P0124. Drive-by-wire vehicles may also enter a limp mode limiting engine power.

Can I clean a throttle position sensor instead of replacing it?

TPS sensors are sealed units and cannot be cleaned or adjusted reliably. If the sensor is producing erratic signals or fault codes, replacement is the correct solution. Attempting to clean or adjust it usually results in continued faults.

Do I need to calibrate the throttle position sensor after replacement?

Many vehicles require a TPS calibration or throttle body relearn procedure after replacement. This is usually done with an OBD2 scanner or by following a specific ignition on/off sequence. Check your vehicle's service manual or contact us for guidance.

Identification
SKU	3517022600-CTPS108
Brand	OEM
Part Numbers
Part Number	CTPS108
Reference OEM Number	35170-22600
Other OEM Numbers	3517023500, 3517022600, 35170-23500, 35170-22600
Related Part Numbers	CTPS108,TPS9006,TP050GEN,SS10563
Trade Part Numbers	BOSCH: 0280122014, VEMO: V40-72-0384, WALKER: 200-1322
Product Specifics
Product Type	SENSOR
Sensor Type	Throttle position sensor
Number of pins	3-Pin
Connector Shape	rectangular
Supplementary Article Info	without cable
Number of mounting bores	2
Rotation Direction	Anticlockwise rotation
Fitment Type	Direct Replacement
Other Details
Note	Ribbed plug housing, 3 gold pins. Not the flat-blade type.