BRAND NEW *OEM QUALITY* MAP SENSOR (MANIFOLD ABSOLUTE PRESSURE SENSOR) TO SUIT BMW

PLEASE COMPARE YOUR ORIGINAL SENSOR WITH THE IMAGES WE PROVIDED IN THE LISTING AND CHECK THE DETAILED VEHICLE LIST IN THE SUITABILITY SECTION.

TO SUIT:

[2001-2013] BMW SERIES 3 (E90 E91 E92 E93) 318i 325i 320i 330i [CONVERTIBLE, COUPE , SEDAN , HATCHBACK]

[2005-2015] BMW SERIES 5 (E60 E61) 525i 530i 520i 523i 528i [SEDAN / WAGON ] 2.5L 3.0L

[2004-2011] BMW SERIES 1 E87 118i 120i 130i [N46 B20, N52 B30 Engines] Hatchback 2.0L

[2005-2011] BMW Z4 (E85 E89) S-DRIVE CONVERTIBLE

[2004-2010] BMW X5 (E53 E70) X-DRIVE 3.0L 4.8L

[2006-2012] BMW X3 (E83 F25) X-DRIVE 2.5L 3.0L N52 , XDRIVE 28i

[2010-2015] BMW X1 E84 S-DRIVE 18i 2.0L N46 B20 B 110kW

OEM# 13627542623, 13620414704, 13627585278

• for OE No: 13628617097
• Number of pins: 3-pin connector
• Connector Shape: D-shaped
• Number of mounting bores: 2
• Supplementary Article/Info 2: with seal ring

Features:

• High Quality
• OEM Fit and Design
• Easy install
• Simple operation
• AU Seller-Fast and Free Shipping

Package Includes:

Manifold Absolute Pressure Sensor or MAP sensor provides instantaneous manifold pressure information to the engine’s electronic control module (ECM). This data is used to calculate air density and determine the engine’s air mass flow rate, which in turn determines the required fuel metering for optimum combustion.

COMPATIBLE VEHICLES

[01/01 – 12/05] BMW 316ti E46 1.8L 4cyl N42 B18 A 85kW
[01/01 – 12/05] BMW 318i E46 2.0L 4cyl N42 B20 A 105kW
[01/93 – 12/96] BMW 318is E36 1.8L 4cyl M42 B18 103kW
[01/92 – 12/96] BMW 318is E36 1.8L 4cyl M42 B18 103kW
[01/01 – 12/05] BMW 318ti E46 2.0L 4cyl N42 B20 A 105kW
[01/05 – 12/07] BMW 320i E90 2.0L 4cyl N46 B20 B 110kW
[01/07 – 12/11] BMW 320i E90 2.0L 4cyl N46 B20 B 115kW
[01/07 – 12/12] BMW 320i E91 2.0L 4cyl N46 B20 B 115kW
[01/99 – 12/00] BMW 323Ci E46 2.5L 6cyl M52 B25 125kW
[01/96 – 12/98] BMW 323i E36 2.5L 6cyl M52 B25 125kW
[01/98 – 12/00] BMW 323i E46 2.5L 6cyl M52 B25 125kW
[01/06 – 12/11] BMW 323i E90 2.5L 6cyl N52 B25 A 140kW
[01/06 – 12/09] BMW 323i E92 2.5L 6cyl N52 B25 A 140kW
[01/06 – 12/13] BMW 325i E92 2.5L 6cyl N52 B25 AF 160kW
[01/07 – 12/13] BMW 325i E93 2.5L 6cyl N52 B25 AF 160kW
[01/05 – 12/06] BMW 330i E90 3.0L 6cyl N52 B30 AF 190kW
[01/10 – 12/11] BMW 335i E90 3.0L 6cyl N55 B30 A 225kW
[01/10 – 12/13] BMW 335i E92 3.0L 6cyl N55 B30 A 225kW
[01/10 – 12/13] BMW 335i E93 3.0L 6cyl N55 B30 A 225kW

ABOUT YOUR VEHICLES’ MAP Sensor

What does a MAP Sensor do?
The MAP sensor converts engine vacuum/manifold pressure to an electrical signal so the computer knows how much load the engine is under. This data is the basis for fuel delivery and timing control.

Where is the MAP sensor located?
The MAP sensor is typically located in the air cleaner, fender wall, firewall, intake manifold, or under the dash.

Will a malfunctioning MAP Sensor illuminate the check engine light or affect vehicle operation?
Yes, a failing sensor can illuminate the MIL and may cause the engine to have a rich or lean fuel mixture condition.

What are the common causes of failure?
Typically these sensors fail due to the constant contact of the movable wiper arm over the sensor element and the exposure to the high underhood heat.

How to determine if the MAP Sensor is malfunctioning?
The Diagnostic Monitor tests for voltages outside of the normal range. The PCM also compares actual MAP output to calculated values to determine sensor performance deterioration. The calculated values are based on TP and various engine load factors.

What makes OUR MAP Sensors the best?
As basic manufacturer, Standard has complete control of the manufacturing process from componentry to finished product to ensure precise operation
Our manufacturing process includes extensive use of robotics for precision assembly
100% product in-line and end-of-line inspection from raw material to packaging of the finished product