Intake Air Temperature Sensor for BMW Diesel X1 X3 X5 E84 E83 E70 Intake Air Temperature Sensor for BMW Diesel X1 X3 X5 E84 E83 E70 Intake Air Temperature Sensor for BMW Diesel X1 X3 X5 E84 E83 E70 Intake Air Temperature Sensor for BMW Diesel X1 X3 X5 E84 E83 E70

Intake Air Temperature Sensor for BMW Diesel X1 X3 X5 E84 E83 E70

Part #: SCAT045 Replaces OEM: 13627792203

Workshop Grade Replaces 13627792203

$98.24
RRP $235.36
SAVE $137.12 (58%)
In Stock

BRAND NEW *OEM Quality* intake air temperature sensor to suit BMW X1 X3 X5 Diesel E84 E83 E70 models.

A failed intake air temperature sensor throws off the engine's fuel trim and often lights up the dash. This replacement restores an accurate reading for the PCM. Express delivery Australia-wide from Melbourne.

TO SUIT

Fits the BMW X1 E84 sDrive18d, sDrive20d, xDrive20d and xDrive23d, the X3 E83 2.0sd, 3.0d, xDrive20d and xDrive30d, and the X5 E70 3.0d, 3.0sd, xDrive30d and xDrive35d turbo diesel models (2005-2015).

FITMENT CHECK

Confirm your vehicle's sensor carries OEM number 13627792203 or 7792203 before ordering - the X1, X3 and X5 span several engine variants across sDrive and xDrive drivetrains.

OEM PART NUMBERS

  • 13627792203
  • 7792203

OTHER PART NUMBERS

  • V20-72-5161
  • 6PT009109-351
  • ECT-BM-001
  • TS10517
  • 210-1133

PACKAGE INCLUDES

1 x Intake Air Temperature Sensor with 2-pin connector.

ABOUT THIS SENSOR

Mounted on the intercooler pipe, this sensor reports charge air temperature to the engine control unit so it can correct boost and injection timing on the X1, X3 and X5's turbo diesel engines.

On AWD xDrive variants especially, accurate air temperature data matters for consistent power delivery under load, so a drifting sensor is a common trigger for a dash warning light.

COMMON SYMPTOMS OF FAILURE

  • Check engine light with fault code P0112 (IAT Circuit Low Input) or P0113 (IAT Circuit High Input)
  • Rough idle or hesitation, particularly from cold
  • Reduced fuel economy
  • Engine defaulting to a reduced-power limp mode
  • Inconsistent power delivery under load, especially on xDrive models
  • [2009 - 2015] BMW X1 sDrive18d E84 2.0L 4cyl Turbo Diesel N47 D20 C 105kW RWD (SUV)
  • [2009 - 2015] BMW X1 sDrive20d E84 2.0L 4cyl Turbo Diesel N47 D20 C 130kW RWD (SUV)
  • [2009 - 2012] BMW X1 xDrive20d E84 2.0L 4cyl Turbo Diesel N47 D20 C 130kW AWD (SUV)
  • [2009 - 2015] BMW X1 xDrive23d E84 2.0L 4cyl Turbo Diesel N47 D20 D 150kW AWD (SUV)
  •  
  • [2005 - 2011] BMW X3 3.0d E83 3.0L 6cyl Turbo Diesel M57 D30 (306D3) 160kW AWD (SAV)
  • [2007 - 2011] BMW X3 2.0sd E83 2.0L 4cyl Turbo Diesel N47 D20 A 130kW AWD (SAV)
  • [2007 - 2010] BMW X3 xDrive20d E83 2.0L 4cyl Turbo Diesel N47 D20 A/N47 D20 C 130kW AWD (SAV)
  • [2008 - 2010] BMW X3 xDrive30d E83 3.0L 6cyl Turbo Diesel M57 D30 (306D3) 160kW AWD (SAV)
  •  
  • [2006 - 2008] BMW X5 3.0d E70 3.0L 6cyl Turbo Diesel M57 D30 (306D3) 173kW AWD (SAV)
  • [2007 - 2008] BMW X5 3.0sd E70 3.0L 6cyl Turbo Diesel M57 D30 (306D5) 210kW AWD (SAV)
  • [2008 - 2010] BMW X5 xDrive30d E70 3.0L 6cyl Turbo Diesel M57 D30 (306D3) 173kW AWD (SAV)
  • [2008 - 2013] BMW X5 xDrive35d E70 3.0L 6cyl Turbo Diesel M57 D30 (306D5) 210kW AWD (SAV)
What does an intake air temperature (IAT) sensor do?

The intake air temperature (IAT) sensor measures the temperature of air entering the engine and sends this data to the ECU. Cold dense air contains more oxygen than warm thin air and requires more fuel for the same combustion result. The ECU uses IAT data alongside manifold pressure or airflow data to calculate the correct fuel injection quantity and ignition timing for the current air temperature conditions. On many vehicles the IAT sensor is integrated into the mass airflow (MAF) sensor housing.

What are the symptoms of a failing air temperature sensor?

Common symptoms include poor fuel economy as the ECU miscalculates fuel delivery based on incorrect temperature data, rough idle or hesitation under acceleration, black smoke from the exhaust due to over-fuelling, hard starting particularly from cold, and a Check Engine light with IAT circuit fault codes P0110 to P0114. Some vehicles may also experience difficulty starting because the ECU cannot correctly calculate the cold start enrichment required.

How do I test an air temperature sensor?

The IAT sensor is a thermistor that changes resistance with temperature. With a cold engine (ambient temperature) the resistance is high - typically 2,000 to 3,000 ohms at 20 degrees C. As temperature rises resistance falls. You can test resistance with a multimeter at the sensor connector and compare against the temperature/resistance chart in your vehicle service manual. An OBD2 scanner showing an IAT reading that does not match ambient temperature when the engine is cold is also a strong indicator of failure.

Is the IAT sensor the same as the MAF sensor?

No - they are different sensors, although on many modern vehicles the IAT sensor is built into the MAF sensor housing as a combined unit. The MAF sensor measures the mass of air entering the engine using a hot wire element. The IAT sensor measures the temperature of that air using a thermistor. If you have a combined MAF/IAT unit that fails, you typically need to replace the complete assembly. Use the Vehicle Part Finder to confirm which type is fitted to your vehicle.

Can a faulty IAT sensor cause my vehicle to fail an emissions test?

Yes. An incorrect IAT reading causes the ECU to miscalculate fuel delivery, typically resulting in a rich running condition with higher CO and hydrocarbon emissions. An active fault code from the IAT sensor will also cause most roadworthy and emissions inspection systems to flag the vehicle as failing the on-board diagnostics check before exhaust emissions are even measured. Resolve any IAT sensor faults before presenting for an emissions test.

Does the IAT sensor need to be reset or calibrated after replacement?

No - the IAT sensor is a passive thermistor requiring no calibration or programming. It is a direct plug-in replacement. Clear any stored fault codes with an OBD2 scanner after fitting the new sensor. The ECU will immediately begin reading the new sensor data and adjust fuelling accordingly. If the vehicle has been running rich due to the faulty sensor, fuel trim values will self-correct over several drive cycles.

Identification
BrandAftermarket OEM Replacement
Part Numbers
Part NumberSCAT045
Reference OEM Number13627792203
Other OEM Numbers13627792203, 7792203
Related Part NumbersATS1083 CAT045
Interchange Part NumbersV20-72-5161, 6PT009109-351, ECT-BM-001
Product Specifics
Product TypeSENSOR
Sensor TypeIntake Air Temperature Sensor
Fitting PositionLocated On Intercooler pipe
Number of pins2 -pin connector
Connector Shaperectangular
Housing ColourBlack
Mounting TypePressed
Housing Diameter12 mm
Other Details
NoteAlways verify fitment using your vehicle's OEM part number.

Be The First To Review This Product!

Help other SENSORGAL LTD. users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category