







Coolant Temp Sensor for Nissan Patrol Y61 GU 4.2 TD42 4.5 TB45 4.8 TB48
Heavy Duty Fit Replaces 22630-44B20
BRAND NEW *OEM Quality* engine coolant temperature sensor to suit Nissan Patrol Y61 GU six-cylinder petrol and diesel.
If your GU Patrol has an erratic temperature gauge, is running rich, or the glow plugs are cycling wrongly on a TD42, this sensor is the direct OEM replacement to fit. Express delivery Australia-wide from Melbourne.
TO SUIT
Covers the Nissan Patrol Y61 GU 4.2L TD42 and TD42T/TD42Ti diesel, the 2.8L RD28ETI, and the 4.5L TB45E and 4.8L TB48DE petrol sixes. Also fits the Y62 Patrol 5.6L VK56VD V8. On the TD42 this sensor also signals the glow plug controller.
FITMENT CHECK
Earlier GQ TD42 engines built before August 1995 use a different plug and a different sensor - compare the connector before ordering. The 3.0L ZD30 four-cylinder GU Patrol uses the same sensor but is listed separately in our store.
OEM PART NUMBERS
- 22630-44B20
- 22630-44B10
- 22630-44B00
- 22630-7Y000
- 22630-71L00
- 22630-D9701
- 22630-D9702
- 22630-95F0B
PACKAGE INCLUDES
1 x BRAND NEW engine coolant temperature sensor. 2-pin rounded rectangular connector, M12 x 1.5 thread, 19mm spanner size. Direct replacement - no wiring modification required.
ABOUT THIS SENSOR
The engine coolant temperature sensor is a thermistor that changes resistance as coolant temperature rises. On the TD42 diesel the signal tells the glow plug system when to stop glowing. On the TB45 and TB48 petrol sixes it feeds the ECU for fuel and ignition timing.
These sensors typically fail through corrosion within the cooling system, and can also leak coolant through the wiring connector. A false reading will drive an over-rich mixture on the petrol engines and incorrect glow plug behaviour on the diesels.
COMMON SYMPTOMS OF FAILURE
- Temperature gauge reading incorrectly or not moving
- Glow plugs cycling too long or not at all on TD42
- Rough idle or rich running when cold
- Poor fuel economy on TB45 and TB48 petrol
- Coolant weeping from the sensor connector
- Check Engine light with codes P0116 P0117 P0118 P0125
- [1997 - 2001] NISSAN PATROL GR,GU,Y61 Station Wagon 4.5 (Petrol 4.5L 6cyl 145kW TB45E)
- [1998 - 2000] NISSAN PATROL GR,GU,Y61 Station Wagon 2.8 TDiC (Diesel 2.8L 6cyl 96kW RD28Ti)
- [1998 - 2003] NISSAN PATROL GR,GU,Y61 Station Wagon 4.2 D 4x4 (Diesel 4.2L 6cyl 91kW TD42)
- [1999 - 2002] NISSAN PATROL GU,TY61,Y61 Platform/Chassis 4.2 D 4x4 (Diesel 4.2L 6cyl 91kW TD42)
- [1999 - 2006] NISSAN PATROL GU,TY61,Y61 Platform/Chassis 4.2 D 4x4 (Diesel 4.2L 6cyl 114kW TD42T)
- [1999 - 2007] NISSAN PATROL Y61,GU Station Wagon 4.2 D (Diesel 4.2L 6cyl 114kW TD42T)
- [2001 - 2012] NISSAN PATROL GR,GU,Y61 Station Wagon 4.8 (Petrol 4.8L 6cyl 185kW TB48DE)
- [2003 - 2012] NISSAN PATROL TY61,GU,Y61 Platform/Chassis 4.2 D 4x4 (Diesel 4.2L 6cyl 91kW TD42)
- [2007 - 2012] NISSAN PATROL TY61,GU,Y61 Platform/Chassis 4.2 D 4x4 (Diesel 4.2L 6cyl 114kW TD42T)
- [2012 - 2025] NISSAN PATROL Y62 SUV 5.6 (Petrol 5.6L 8cyl 298kW VK56VD)
How do I test a coolant temperature sensor?
The most common test is to measure the sensor resistance with a multimeter at a known coolant temperature and compare against the manufacturer resistance curve. A cold engine (20 degrees C) typically reads 2,000 to 3,000 ohms and drops to around 200 to 300 ohms at operating temperature (90 degrees C). An OBD2 scanner showing a fixed temperature reading that does not change as the engine warms up is also a strong indicator of sensor failure.
Can a faulty coolant temperature sensor cause my engine to overheat?
Indirectly yes. If the sensor reports a lower temperature than actual, the ECU may not activate the cooling fan at the correct time, allowing the engine to overheat. It can also suppress the dashboard warning light, meaning you may not be alerted until the engine is already at a dangerously high temperature. Replace a suspected faulty sensor promptly.
Do I need to drain the coolant to replace the sensor?
Not always - many coolant temperature sensors can be replaced quickly with minimal coolant loss if you work fast and have a replacement ready to thread in immediately. However on some vehicles the sensor location requires partial coolant drainage. Check the sensor position on your specific engine before starting. Always use fresh coolant when topping up after replacement.
What are the symptoms of a faulty coolant temperature sensor?
Symptoms include poor fuel economy, black smoke, engine overheating warning, incorrect temperature gauge reading, hard starting when cold, and rough idle. Fault codes P0115 to P0119 are commonly associated with coolant temperature sensor faults.
Is it safe to drive with a bad coolant temperature sensor?
A faulty coolant temperature sensor can cause the ECU to run rich fuel mixtures and prevent the cooling fan from operating correctly, risking engine overheating. Replace it promptly - it is a low-cost part that can prevent expensive engine damage.
How do I know if my coolant temperature sensor or my thermostat is faulty?
A faulty thermostat typically causes the engine to overheat or never reach operating temperature. A faulty coolant temp sensor causes incorrect gauge readings and running issues but the coolant itself may be at the correct temperature. An OBD2 scanner showing live coolant temp data helps distinguish between the two.
Are there two coolant temperature sensors on my vehicle?
Many vehicles have two sensors - one for the ECU (engine management) and one for the dashboard temperature gauge. They look similar but are not interchangeable. Check your vehicle's service manual or contact us with your vehicle details to confirm which sensor you need.
| Identification | |
|---|---|
| SKU | CCS37-CS830 |
| Barcode # | 9314258071967 |
| Brand | Aftermarket OEM Replacement |
| Part Numbers | |
| Part Number | CCS37 |
| Reference OEM Number | 22630-44B20 |
| Other OEM Numbers | 22630-44B20, 22630-44B10, 22630-44B00, 22630-43Y00, 22630-00QAH |
| Related Part Numbers | CS830, CTS028, CTS-031, TCS075, OCS37, CTS1013 |
| Trade Part Numbers | BOSCH: 0280130129, VEMO: V38-72-0004, HELLA: 6PT 009 107-531 |
| Product Specifics | |
| Product Type | SENSOR |
| Sensor Type | Coolant Temperature Sensor |
| Manufacturer Warranty | 1 Year |
| Ean | 9314258071967 |
| Thread Size | M12x1.5 mm |
| Spanner Size | 19 mm |
| Number of pins | 2-Pin |
| Connector Shape | oval |
| Housing Colour | Black, Blue |
| Compatible Makes | Nissan |
| Fitment Type | Direct Replacement |
| Other Details | |
| Note | Always verify fitment using your vehicle's OEM part number. |
| Unit Of Measure | ea |
Be The First To Review This Product!
Help other SENSORGAL LTD. users shop smarter by writing reviews for products you have purchased.