1-Bar MAP Sensor for Holden Commodore VE VF V6 V8 Captiva Cruze 12594942
Direct Fit Replaces 12594942
BRAND NEW *OEM Quality* 1-bar MAP sensor to suit Holden Commodore VE VF V6 and V8, Calais, Caprice, Captiva and HSV.
A failing MAP sensor causes rough idle, hesitation and a check engine light that keeps coming back. This 3-pin sensor restores correct manifold pressure readings and is packed and shipped same day before 12pm.
TO SUIT
- For Holden Commodore VE VF, Calais, Statesman and Caprice WM - 3.0L LF1 LFW and 3.6L LLT LFX LY7 LWR V6, 6.0L L76 L77 L98 and 6.2L LS3 V8 (2006-2017)
- For HSV VE VF Clubsport, GTS, Maloo, Senator and WM Grange - 6.0L LS2 and 6.2L LS3 LSA V8 (2006-2017)
- For Holden Captiva CG Series II 2.4L and 3.0L V6 (2011-2018)
- For Holden Cruze JH, Barina TM and Spark MJ, Astra AH and Acadia AC (2007-2019)
FITMENT CHECK
Early VE and WM V8 (L98, L76 and HSV LS2) take this sensor from VIN 8L100908 only - earlier builds use a different connector, so compare it with your original. On the Cruze JH and Astra J turbo this is the 3-pin barometric sensor on the manifold, not the 4-pin boost sensor.
OEM PART NUMBERS
- 12594942
- 12644228
- 12694725
- 12701247
- 12711681
- 12591290
- 55573248
- 93192107
- 1235040
- 1235060
- 1238395
- 1238894
- 4819481
- 8125949420
- 8126442280
OTHER PART NUMBERS
- 0261230289
- 0261230155
- 0261230282
- V40-72-0573
- ECM-PL-009
- 225-1232
- 213-3949
- 213-4681
- 7.18222.29.0
- 6PP 358 152-091
- AS394
- MAP-080
- MP154
PACKAGE INCLUDES
1 x 1-bar MAP sensor, 10-120 kPa range, 3-pin oval plug, single bolt mount.
ABOUT THIS SENSOR
On the Alloytec and SIDI V6 and the Gen IV V8 this sensor sits on the intake manifold and reports manifold vacuum to the ECU. The ECU combines it with the MAF reading to work out engine load, fuel trim and spark timing.
A sensor that reads high makes the engine run rich and smell of fuel; one that reads low causes lean misfires, flat spots and surging at idle. On V8s with Active Fuel Management a bad reading can also upset cylinder switching.
COMMON SYMPTOMS OF FAILURE
- Check engine light with P0106 / P0107 / P0108 (MAP circuit)
- Rough or surging idle and stalling when coming to a stop
- Hesitation and flat spots under acceleration
- Fuel trim codes P0171 / P0172
- Fuel smell or black smoke from running rich
- Higher fuel consumption
- [09/04 - 12/10] CHRYSLER 300C LE,LX 5.7L EZB,EZD,EZH V8 250kW Wagon - barometric sensor
- [08/18 - 12/19] HOLDEN ACADIA AC 3.6L LGX V6 231kW SUV
- [04/07 - 03/10] HOLDEN ASTRA AH i 1.8L Z 18 XER 4cyl 103kW Coupe/Hatchback/Wagon
- [10/10 - 12/15] HOLDEN BARINA SPARK MJ i Auto 1.2L B12D2 4cyl 63kW Hatchback
- [10/10 - 12/15] HOLDEN BARINA SPARK MJ i Manual 1.2L B12D1 Euro 5 4cyl 59kW Hatchback
- [11/11 - 09/18] HOLDEN BARINA TM i 1.6L F16D4 4cyl 85kW Hatchback
- [12/12 - 08/16] HOLDEN BARINA TM i 1.6L F16D4 4cyl 85kW Sedan
- [07/13 - 08/16] HOLDEN BARINA TM RS Turbo 1.4L A 14 NET Euro 5 4cyl 103kW Hatchback
- [08/06 - 05/13] HOLDEN CALAIS VE i V8 6.0L L98,L77 270kW Sedan - from VIN 8L100908
- [05/08 - 05/13] HOLDEN CALAIS VE i V6 3.6L LLT 210kW Sedan/Wagon
- [06/08 - 05/13] HOLDEN CALAIS VE i V8 6.0L L98,L77 270kW Wagon - from VIN 8L100908
- [01/09 - 05/13] HOLDEN CALAIS VE i V8 6.0L L76,L77 260kW Sedan/Wagon
- [06/13 - 10/17] HOLDEN CALAIS VF i V6 3.6L LFX 210kW Sedan/Wagon
- [06/13 - 09/15] HOLDEN CALAIS VF i V8 6.0L L77 260kW Sedan/Wagon
- [09/15 - 10/17] HOLDEN CALAIS VF i V8 6.2L LS3 304kW Sedan/Wagon
- [07/06 - 08/13] HOLDEN CAPRICE WM i V6 3.6L LE0 180kW Sedan
- [07/06 - 08/13] HOLDEN CAPRICE WM i V8 6.0L L76,L77 260kW Sedan - from VIN 8L100908
- [08/06 - 08/13] HOLDEN CAPRICE WM i V8 6.0L L76,L77 270kW Sedan - from VIN 8L100908
- [08/09 - 08/13] HOLDEN CAPRICE WM i V6 3.6L LFX,LLT 210kW Sedan
- [01/12 - 08/13] HOLDEN CAPRICE WM i V6 LPG 3.6L LWR 180kW Sedan
- [03/11 - 12/15] HOLDEN CAPTIVA 5 CG Gen. II i 2.4L LE5,A 24 XE Euro 5 4cyl 123kW SUV
- [03/11 - 12/18] HOLDEN CAPTIVA 7 CG Gen. II i 2.4L LE5,A 24 XE Euro 5 4cyl 123kW SUV
- [03/11 - 12/18] HOLDEN CAPTIVA 7 CG Gen. II i 3.0L LF1 V6 190kW SUV
- [06/12 - 12/15] HOLDEN CAPTIVA 5 CG Gen. II i Flex 2.4L A 24 XE,LE9 Euro 5 4cyl 123kW SUV
- [07/12 - 12/18] HOLDEN CAPTIVA 7 CG Gen. II Flexfuel 3.0L LFW V6 190kW SUV
- [07/06 - 05/13] HOLDEN COMMODORE VE i V8 SS, SS-V 6.0L L76,L77 260kW Sedan/Wagon
- [01/08 - 05/13] HOLDEN COMMODORE VE i V8 SS, SS-V 6.0L L98,L77 270kW Sedan
- [08/06 - 05/13] HOLDEN COMMODORE VE i V6 Dual Fuel LPG 3.6L HB,LE0,LW2 175kW Sedan
- [09/07 - 10/13] HOLDEN COMMODORE VE i V6 Dual Fuel LPG 3.6L HN,LE0,LW2 175kW Utility
- [09/07 - 09/10] HOLDEN COMMODORE VE i V8 SS, SS-V 6.0L L76 260kW Utility
- [09/07 - 10/13] HOLDEN COMMODORE VE i V8 SS, SS-V 6.0L L98,L77 270kW Utility - from VIN 8L100908
- [01/08 - 05/13] HOLDEN COMMODORE VE i V8 SS, SS-V 6.0L L98,L77 270kW Wagon
- [09/09 - 05/13] HOLDEN COMMODORE VE i V6 3.0L LFW,LF1 190kW Sedan/Wagon
- [09/09 - 05/13] HOLDEN COMMODORE VE i V6 SV6 3.6L LFX,LLT 210kW Sedan/Wagon
- [09/09 - 10/13] HOLDEN COMMODORE VE i V6 SV6 3.6L LFX,LLT 210kW Utility
- [09/10 - 04/13] HOLDEN COMMODORE VE Flex 6.0L L77 V8 260kW Utility
- [09/10 - 10/13] HOLDEN COMMODORE VE i V6 3.0L LF1 190kW Utility
- [02/12 - 05/13] HOLDEN COMMODORE VE i V6 LPG 3.6L LWR 180kW Sedan/Utility/Wagon
- [05/13 - 09/15] HOLDEN COMMODORE VF i SS, SS-V 6.0L L77 V8 260kW Sedan/Wagon
- [05/13 - 09/15] HOLDEN COMMODORE VF i SS, SS-V 6.0L L77 V8 270kW Sedan/Utility/Wagon
- [05/13 - 10/17] HOLDEN COMMODORE VF i SV6 3.6L LFX V6 210kW Sedan/Utility/Wagon
- [05/13 - 10/17] HOLDEN COMMODORE VF i SV6 3.6L LY7 V6 180kW Sedan/Utility
- [05/13 - 08/15] HOLDEN COMMODORE VF i SV6 LPG 3.6L LWR V6 180kW Sedan
- [05/13 - 10/17] HOLDEN COMMODORE VF i V6 3.0L LF1 185kW Wagon
- [05/13 - 10/17] HOLDEN COMMODORE VF i V6 3.0L LFW 190kW Sedan/Wagon
- [05/13 - 10/17] HOLDEN COMMODORE VF i V6 3.0L LFW,LF1 185kW Sedan
- [05/13 - 10/17] HOLDEN COMMODORE VF i V6 3.6L LY7 180kW Wagon
- [05/13 - 10/17] HOLDEN COMMODORE VF i V6 Flexfuel 3.0L LF1 185kW Wagon
- [05/13 - 08/15] HOLDEN COMMODORE VF i V6 LPG 3.6L LWR 180kW Wagon
- [05/13 - 09/15] HOLDEN COMMODORE VF i V8 SS, SS-V 6.0L L77 260kW Utility
- [09/15 - 10/17] HOLDEN COMMODORE VF i SS, SS-V 6.2L LS3 V8 304kW Sedan/Utility/Wagon
- [04/11 - 12/16] HOLDEN CRUZE JH i Turbo 1.4L A 14 NET Euro 5 4cyl 103kW Sedan - barometric sensor
- [11/11 - 12/16] HOLDEN CRUZE JH i Turbo 1.4L A 14 NET Euro 5 4cyl 103kW Hatchback - barometric sensor
- [04/13 - 12/16] HOLDEN CRUZE JH SRi 1.6L A 16 LET Euro 5 Turbo 4cyl 132kW Hatchback/Sedan - barometric sensor
- [07/06 - 12/10] HOLDEN STATESMAN WM i V6 3.6L LY7 180kW Sedan
- [08/09 - 12/10] HOLDEN STATESMAN WM i V6 3.6L LLT 210kW Sedan
- [08/06 - 06/08] HSV CLUBSPORT VE i V8 6.0L LS2 307kW Sedan - from VIN 8L100908
- [04/08 - 05/13] HSV CLUBSPORT VE i V8 6.2L LS3 317kW Sedan/Wagon
- [02/12 - 05/13] HSV CLUBSPORT VE R8 6.2L LS3 V8 325kW Sedan
- [08/12 - 05/13] HSV CLUBSPORT VE R8 LPG 6.2L LS3 V8 325kW Sedan
- [05/13 - 08/15] HSV CLUBSPORT VF i V8 6.2L LS3 340kW Sedan/Wagon
- [05/13 - 10/14] HSV CLUBSPORT VF i V8 6.2L LS3 317kW Sedan
- [05/13 - 10/14] HSV CLUBSPORT VF i V8 6.2L LS3 325kW Wagon
- [06/13 - 08/15] HSV CLUBSPORT VF i V8 6.2L LS3 325kW Sedan
- [04/08 - 10/10] HSV GRANGE WM i V8 6.2L LS3 317kW Sedan
- [10/10 - 05/13] HSV GRANGE WM i V8 6.2L LS3 325kW Sedan
- [08/12 - 04/13] HSV GRANGE WM i V8 LPG 6.2L LS3 325kW Sedan
- [08/06 - 03/08] HSV GTS VE i V8 6.0L LS2 307kW Sedan - from VIN 8L100908
- [04/08 - 10/10] HSV GTS VE i V8 6.2L LS3 317kW Sedan
- [10/10 - 05/13] HSV GTS VE i V8 6.2L LS3 325kW Sedan
- [05/13 - 06/17] HSV GTS VF i V8 6.2L LSA 430kW Sedan - inlet sensor
- [10/07 - 03/08] HSV MALOO VE i V8 6.0L LS2 307kW Utility - from VIN 8L100908
- [04/08 - 05/13] HSV MALOO VE i V8 6.2L LS3 317kW Utility
- [05/13 - 10/14] HSV MALOO VF i V8 6.2L LS3 317kW Utility
- [05/13 - 10/14] HSV MALOO VF i V8 6.2L LS3 325kW Utility
- [05/13 - 12/16] HSV MALOO VF i V8 6.2L LS3 340kW Utility
- [05/13 - 06/17] HSV MALOO VF i V8 6.2L LSA 430kW Utility - inlet sensor
- [08/06 - 03/08] HSV SENATOR VE i V8 6.0L LS2 307kW Sedan - from VIN 8L100908
- [04/08 - 05/13] HSV SENATOR VE i V8 6.2L LS3 317kW Sedan
- [08/12 - 04/13] HSV SENATOR VE i V8 6.2L LS3 325kW Sedan
- [05/13 - 08/15] HSV SENATOR VF i V8 6.2L LS3 340kW Sedan
- [09/12 - 12/13] OPEL ASTRA 08 J Turbo 1.4L B 14 NET,A 14 NET Euro 6 4cyl 103kW Hatchback
- [09/12 - 12/13] OPEL ASTRA 08 J Turbo 1.6L A 16 LET Euro 5 4cyl 132kW Hatchback - barometric sensor
- [09/12 - 12/13] OPEL ASTRA 35 J Turbo 1.4L B 14 NET,A 14 NET Euro 6 4cyl 103kW Wagon
- [09/12 - 12/13] OPEL ASTRA 35 J Turbo 1.6L A 16 LET Euro 5 4cyl 132kW Wagon
- [09/12 - 12/13] OPEL ASTRA 68 J Turbo 1.4L B 14 NET,A 14 NET Euro 6 4cyl 103kW Hatchback
- [09/12 - 12/13] OPEL ASTRA 68 J Turbo 1.6L A 16 LET Euro 5 4cyl 132kW Hatchback - barometric sensor
- [12/12 - 04/18] OPEL ASTRA 08 J SIDI 1.6L A 16 XHT,B 16 SHL Euro 6 Turbo 4cyl 125kW Hatchback
- [12/12 - 10/15] OPEL ASTRA 68 J SIDI 1.6L A 16 XHT,B 16 SHL Euro 6 Turbo 4cyl 125kW Hatchback
What fault codes does a faulty MAP sensor trigger?
A faulty MAP sensor typically triggers codes P0105 to P0109. P0105 indicates a circuit malfunction, P0106 indicates the signal is out of range, P0107 and P0108 indicate the signal is too low or too high respectively, and P0109 indicates an intermittent circuit fault. These codes combined with symptoms such as poor idle and black smoke are strong indicators of MAP sensor failure.
How do I test a MAP sensor?
With an OBD2 scanner in live data mode, the MAP sensor should read close to atmospheric pressure (around 101 kPa) with the engine off, and drop to 30 to 50 kPa at idle with the engine running due to manifold vacuum. Under wide open throttle the reading should rise back toward atmospheric. A sensor that reads flat or does not respond to throttle changes has failed. You can also test supply voltage and signal output with a multimeter.
Can I drive with a faulty MAP sensor?
You can drive short distances but engine performance will be noticeably degraded. The ECU uses the MAP sensor to calculate fuel delivery - a faulty sensor causes incorrect fuelling which leads to poor economy, rough running, and increased emissions. On turbocharged engines a faulty MAP sensor can also prevent boost control from operating correctly. Replace it as soon as possible to avoid further damage.
What does a MAP sensor do?
The Manifold Absolute Pressure (MAP) sensor measures intake manifold pressure to help the ECU calculate the correct fuel and ignition timing. It is critical for engine efficiency, particularly on turbocharged and supercharged vehicles.
What are the symptoms of a faulty MAP sensor?
Symptoms include poor acceleration, rough idle, excessive fuel consumption, black smoke, engine hesitation, and a Check Engine light with codes P0105-P0109. Turbocharged vehicles may also experience boost control issues.
What is the difference between a MAP sensor and a MAF sensor?
A MAF (Mass Air Flow) sensor directly measures the mass of air entering the engine. A MAP sensor measures manifold pressure and the ECU calculates air mass from that reading. Many vehicles use one or the other; some use both. They are not interchangeable.
| Identification | |
|---|---|
| Brand | Aftermarket OEM Replacement |
| Part Numbers | |
| Part Number | SCMS262 |
| Reference OEM Number | 55573248 |
| Other OEM Numbers | 12594942, 12644228, 12694725, 12701247, 55573248 |
| Related Part Numbers | CMS262, MAP-080, MP154GEN, MP154, 0261230282 |
| Interchange Part Numbers | 0261230289, 0261230155, V40-72-0573, ECM-PL-009, 225-1232 |
| Product Specifics | |
| Product Type | SENSOR |
| Sensor Type | Manifold Absolute Pressure (MAP) Sensor |
| Features | Direct Fit |
| Manufacturer Warranty | 1 Year |
| Fitting Position | Intake Manifold |
| Number of pins | 3 -pin connector |
| Connector Shape | oval |
| Pressure Range | 10 kPa, until 120 kPa |
| Number of mounting bores | 1 |
| Compatible Makes | Holden |
| Fitment Type | Direct Replacement |
| Other Details | |
| Note | Early VE V8: fits from VIN 8L100908. 3-pin plug only. |
| Unit Of Measure | ea |
Be The First To Review This Product!
Help other SENSORGAL LTD. users shop smarter by writing reviews for products you have purchased.