Rear Main Crankshaft Seal for Kia Cerato 21443-2B020

BRAND NEW *OEM Quality* rear main crankshaft seal for Kia Cerato vehicles.

A worn rear main crankshaft seal lets engine oil weep past the back of the crankshaft, often showing up as a slow leak near the bell housing or a slipping clutch on manual Cerato models. Ships same-day from our Cranbourne VIC warehouse.

TO SUIT

This seal fits Kia Cerato BD,BDM, TD (G4FJ/G4FC engines) models from 2009 to 2026. See the full model and engine breakdown below for exact coverage.

FITMENT CHECK

Confirm your Cerato is fitted with the OEM number 21443-2B020 before ordering, as Cerato spans several chassis codes and engine families across this production run.

OEM PART NUMBERS

• 21443-2B020
• 21443-2B000
• 21443-2B010

OTHER PART NUMBERS

• Elring: 318.360
• Victor Reinz: 81-54069-10
• Permaseal: OSS0458

PACKAGE INCLUDES

1 x Rear Main Crankshaft Seal, 76mm ID x 108mm OD x 8mm.

ABOUT THIS SEAL

The rear main seal sits on the crankshaft flange at the transmission end of the Cerato engine, keeping oil inside the crankcase while the crankshaft spins freely.

On Cerato models this seal hardens with age and mileage, and once it fails oil weeps onto the clutch or torque converter, gradually dropping oil level and risking clutch slip on manual variants.

COMMON SYMPTOMS OF FAILURE

• Burning oil smell from the transmission area
• Oil residue found on the flywheel during a clutch or transmission job
• Oil misting visible on the flexplate or flywheel on inspection
• A burning clutch smell under load
• Dropping oil level with no leak visible at the sump or rocker cover