BRAND NEW OEM Quality THROTTLE POSITION SENSOR TO SUIT HOLDEN FORD KIA HYUNDAI VOLVO SAAB, VARIOUS MODELS

PLEASE COMPARE YOUR ORIGINAL SENSOR WITH THE IMAGES WE PROVIDED IN THE LISTING AND CHECK THE DETAILED VEHICLE LIST IN THE SUITABILITY SECTION.

TO SUIT:

SAAB 900 YS3A 2.0L 4cyl B202 [01/90 - 12/90]
SAAB 900 YS3A 2.0L 4cyl B202 [01/86 - 12/90]
SAAB 900 YS3A 2.0L 4cyl B202 [01/88 - 12/90]
SAAB 900 YS3A 2.0L 4cyl B202 [01/87 - 12/90]
SAAB 900 YS3D 2.0L 4cyl B206 [01/94 - 12/97]
SAAB 900 YS3D 2.3L 4cyl B234 [01/94 - 12/96]
SAAB 900 YS3D 2.3L 4cyl B234 [01/97 - 12/98]
SAAB 900 YS3D 2.3L 4cyl B234 [01/94 - 12/98]
SAAB 900 YS3D 2.5L V6 B258 [01/94 - 12/96]
SAAB 900 YS3D 2.5L V6 B258 [01/94 - 12/97]
SAAB 9000 YS3C 2.0L 4cyl B202 [01/87 - 12/89]
SAAB 9000 YS3C 2.0L 4cyl B202 [01/88 - 12/90]
SAAB 9000 YS3C 2.0L 4cyl B202 [01/87 - 12/90]
SAAB 9000 YS3C 2.0L 4cyl B202 [01/86 - 12/88]
SAAB 9000 YS3C 2.3L 4cyl B234 [01/95 - 12/97]
SAAB 9000 YS3C 2.3L 4cyl B234 [01/95 - 12/95]
SAAB 9000 YS3C 2.3L 4cyl B234 [01/90 - 12/94]
SAAB 9000 YS3C 2.3L 4cyl B234 [01/93 - 12/94]
SAAB 9000 YS3C 2.3L 4cyl B234 [01/93 - 12/98]
SAAB 9000 YS3C 2.3L 4cyl B234 [01/91 - 12/95]
SAAB 9000 YS3C 2.3L 4cyl B234 [01/93 - 12/97]
SAAB 9000 YS3C 2.3L 4cyl B234 [01/91 - 12/92]
SAAB 900i YS3A 2.0L 4cyl B202 [01/90 - 12/90]
SAAB 900i YS3A 2.0L 4cyl B202 [01/89 - 12/90]
SAAB 900i YS3A 2.0L 4cyl B202 [01/89 - 12/91]
SAAB 900i YS3A 2.1L 4cyl B212 [01/92 - 12/93]
SAAB 900i YS3A 2.1L 4cyl B212 [01/91 - 12/93]

OEM# 90323839, 35170-22001, 35170-22010, 0K247-18-911, 4661062, 1336385

for OE No: 35170-22001
Rotation Direction: Anticlockwise rotation
Number of pins: 3 -pin connector
Supplementary Article Info: without cable
Connector Shape: Rectangular
Number of mounting bores: 2

Features:

High Quality
OEM Fit and Design
Easy install
Simple operation
AU Seller-Fast and Free Shipping

Package Includes:

1* THROTTLE POSITION SENSOR. (3 PIN PLUG) A throttle position sensor (TPS) is located on the throttle body to monitor the air intake of an engine. It detects the position of the throttle body butterfly, plate, or spindle, and sends it to the ECU. The ECU utilizes this input to decide the fuel requirement and spark timing to ensure safe and smooth engine performance.

What fault codes does a faulty TPS trigger?

A faulty throttle position sensor typically triggers codes P0120 to P0124. P0120 and P0121 indicate the TPS signal is out of range, P0122 and P0123 indicate the signal is too low or too high, and P0124 indicates an intermittent signal. On drive-by-wire vehicles additional codes related to the electronic throttle control system may also be present.

Can a faulty TPS cause my automatic transmission to shift incorrectly?

Yes. The ECU shares throttle position data with the transmission control module to determine when to upshift and downshift. A faulty TPS sending incorrect throttle angle data can cause erratic shift points, harsh gear changes, the transmission hunting between gears, or the vehicle remaining in a fixed gear. Replacing the TPS often resolves transmission behaviour issues that appear unrelated.

Is it safe to drive with a faulty throttle position sensor?

It depends on how severely the sensor has failed. A partially failed TPS may cause hesitation and poor throttle response but the vehicle remains driveable. A fully failed TPS on a drive-by-wire vehicle can trigger limp mode, restricting the engine to a fixed low throttle position to prevent runaway acceleration. In either case replace the sensor as soon as possible as the fault can worsen without warning.

What are the symptoms of a faulty throttle position sensor?

Symptoms include jerky or hesitant acceleration, rough idle, unexpected surging, poor throttle response, stalling, and fault codes P0120-P0124. Drive-by-wire vehicles may also enter a limp mode limiting engine power.

Can I clean a throttle position sensor instead of replacing it?

TPS sensors are sealed units and cannot be cleaned or adjusted reliably. If the sensor is producing erratic signals or fault codes, replacement is the correct solution. Attempting to clean or adjust it usually results in continued faults.

Do I need to calibrate the throttle position sensor after replacement?

Many vehicles require a TPS calibration or throttle body relearn procedure after replacement. This is usually done with an OBD2 scanner or by following a specific ignition on/off sequence. Check your vehicle's service manual or contact us for guidance.

Identification
SKU	CTPS100-5
Barcode #	9314258077679
Brand	Aftermarket OEM Replacement
Part Numbers
Part Number	CTPS100
Reference OEM Number	3517022001
Other OEM Numbers	1336385, 3517022010, 4661062, 90323839
Related Part Numbers	0280122001, 0280122008, TPS-007, TTH003
Product Specifics
Sensor Type	Throttle position sensor
Type	Sensor
Features	Direct Fit
Reference Oe/oem Number	3517022001
Manufacturer Warranty	1 Year
Oem	90323839
Ean	9314258077679
Make	VOLVO
Note	CHECK IMAGES. CONFIRM WITH OE NUMBER
Interchange Part Number	TTH003
Other Details
Note	Always verify fitment using your vehicle's OEM part number.
Unit Of Measure	ea