BRAND NEW *OEM QUALITY* ENGINE OIL PRESSURE SWITCH (Sending Unit) TO SUIT CHRYSLER JEEP DODGE, VARIOUS MODELS

PLEASE COMPARE YOUR ORIGINAL SENSOR WITH THE IMAGES WE PROVIDED IN THE LISTING AND CHECK THE DETAILED VEHICLE LIST IN THE SUITABILITY SECTION.

TO SUIT:

OEM# 05149098AA, 5149098AA

• for OE No: 05149098AA, 5149098AA
• Thread Size: 3/8×18 NPT
• Sensor Type: Closed-type Sensor
• from: 0.3 bar TO 6 bar
• Number of pins: 1 -pin connector
• Housing Colour: Black
• Connector Shape: oval

Features:

• High Quality
• OEM Fit and Design
• Easy install
• Simple operation
• AU Seller-Fast and Free Shipping

Package Includes:

1* ENGINE OIL PRESSURE SWITCH (1 PIN PLUG).

An Oil Pressure Switch or Sensor is designed to assess the integrity of an engine’s lubrication system. The switch responds to changes in engine oil pressure, and any fault is displayed via illumination of the oil pressure light in the dash.
A faulty oil pressure switch/sensor can lead to low oil levels, which can be very problematic for your engine.

COMPATIBLE VEHICLES

[01/05 – 12/11] CHRYSLER 300C 3.5L V6 EGG 183kW
[01/06 – 12/09] CHRYSLER 300C 3.5L V6 EGG 183kW
[01/97 – 12/01] CHRYSLER GRAND VOYAGER Gen3 RS 3.3L V6 EGA, EGM 116kW
[01/02 – 12/05] CHRYSLER GRAND VOYAGER Gen4 RG 3.3L V6 EGA, EGM 128kW
[01/01 – 12/07] CHRYSLER GRAND VOYAGER Gen4 RG 3.3L V6 EGA, EGM 128kW
[01/08 – 12/11] CHRYSLER GRAND VOYAGER Gen5 RT 3.8L V6 EGL 142kW
[01/96 – 12/99] CHRYSLER NEON JA 2.0L 4cyl S4RE 420H ECB 98kW
[01/99 – 12/02] CHRYSLER NEON JB 2.0L 4cyl S4RE 420H ECB 98kW
[01/00 – 12/04] CHRYSLER PT CRUISER PF-PG 2.0L 4cyl ECC 104kW
[01/06 – 12/08] CHRYSLER PT CRUISER PF-PG 2.4L 4cyl EDZ 105kW
[01/04 – 12/10] CHRYSLER PT CRUISER PF-PG 2.4L 4cyl EDZ 105kW
[01/07 – 12/11] CHRYSLER SEBRING JS 2.7L V6 EER
[01/07 – 12/09] CHRYSLER SEBRING JS 2.7L V6 EER
[01/00 – 12/01] CHRYSLER VOYAGER GS 3.3L V6 EGA, EGM 116kW
[01/01 – 12/04] CHRYSLER VOYAGER RG 3.3L V6 EGA, EGM 128kW

[01/07 – 12/10] DODGE AVENGER JS 2.4L 4cyl EDG 125kW
[01/08 – 12/10] DODGE AVENGER JS 2.7L V6 EER 137kW
[01/06 – 12/10] DODGE CALIBER PM 1.8L 4cyl EBA 110kW
[01/06 – 12/07] DODGE CALIBER PM 2.4L 4cyl ED3 127kW
[01/08 – 12/11] DODGE JOURNEY JC 2.7L V6 EER 136kW

[01/04 – 12/04] JEEP CHEROKEE KJ 2.4L 4cyl ED1
[01/04 – 12/05] JEEP CHEROKEE KJ 2.4L 4cyl ED1
[01/07 – 12/13] JEEP COMPASS MK 2.4L 4cyl ED3 125kW
[01/07 – 12/16] JEEP COMPASS MK 2.4L 4cyl ED3 125kW
[01/07 – 12/12] JEEP PATRIOT MK 2.4L 4cyl ED3 125kW
[01/07 – 12/13] JEEP PATRIOT MK 2.4L 4cyl ED3 125kW
[01/07 – 12/11] JEEP WRANGLER JK 3.8L V6 EGH, EGT 146kW
[01/06 – 12/11] JEEP WRANGLER JK 3.8L V6 EGH, EGT 146kW

ABOUT YOUR VEHICLE’S ENGINE OIL PRESSURE SENSOR

What does an oil pressure switch do?
The oil pressure switch is installed in the oil circuit of the engine. It monitors the oil pressure and turns off or on a warning light or controls an oil pressure indicator.

Where are these sensors located?
An oil pressure sensor (switch) is usually installed in the cylinder block close to an oil filter or at the oil filter housing.

Will a malfunctioning oil pressure switch illuminate the warning light or affect vehicle operation?
The oil pressure switch is normally closed. When the ignition is switched on, the oil pressure warning light illuminates. When oil pressure is built up as the engine starts, the switch contact in the oil pressure switch opens and the ground contact for the warning light is interrupted. The warning light goes out.

What are the common causes of failure?
Typically these sensors fail due to a Clogged inlet bore, Contact failure on the connector, Internal short-circuits, Damaged measuring element, Loss of sealing

How to determine if these sensors are malfunctioning?
The best way to test if your sensor is bad is through the lights on the oil pressure gauge. If the low oil pressure warning light comes on when the engine’s oil levels are normal and your engine is running smoothly and quietly, then you likely have a bad oil pressure sensor.

Why Buy from Us / What makes Our Coolant Temp Sensors the best?
• As an OEM manufacturer, Standard/ Our Supplier has complete control of the manufacturing process from componentry to finished product
• All Pressure sensors are 100% factory-tested to ensure trouble-free performance.